RRAS is an acronym for Routing and Remote Access Service, which is a Microsoft API and software which allows administration of routing and remote access capabilities of the operating system.

learn more… | top users | synonyms

2
votes
1answer
129 views

website not accessible with IIS6 while NAT is configured in Windows 2003

I have Windows2003 server configured with IIS 6. Until now it was working fine, but since I enabled NAT for my users to access the internet via this server, the website becomes unavailable. Note that ...
1
vote
1answer
328 views

can't connect 2 subnets through RRAS 2008 r2

I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here ...
1
vote
1answer
335 views

Hyper-V Test Bed for Forefront TMG 2010 Networking Issues

I am trying to set up a Server 2008 R2 test bed for a Forefront TMG 2010 deployment and I can't seem to get the networking configured correctly. The set up is as follows: Hyper-V Host has two NICs, ...
1
vote
1answer
812 views

Reverse NAT Setup for Hyper-V on Win 2008 R2

I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned ...
1
vote
1answer
224 views

pptp server 2003 hands out gateway from nic not dhcp server

I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& ...
0
votes
1answer
46 views

server 2012 vpn not passing traffic

Having some major problems with Server 2012 Essentials. Have setup remote access and installed RRAS console. I can connect to the VPN through SSTP or PPTP no problems. Authentication is fine (NAP is ...
0
votes
1answer
560 views

How can I configure IPSec on Windows 2012 R2 to use Pre Shared Key compatible with Android phones?

Our company has to comply with the mandate that all mobile phones use L2TP or IPSec VPNs when using untrusted Wifi or GPRS connections... namely to protect from MITM attacks. Were also interested in ...
0
votes
1answer
90 views

Can you publish a public IP route over a Windows RRAS VPN?

I'm trying to direct traffic to a public IP range to travel over our VPN without redirecting all traffic over the VPN. I've added the IP via RRAS > VPN > IPv4 > Static Routes however, the public IP ...
0
votes
1answer
647 views

Windows Server 2012 VPN route from LAN to client

I am trying to set up a VPN using Windows Server 2012 Standard. My network has a SonicWALL edge router, and the server in question is a DC, running DNS, DHCP and RRAS, and the subnet is 10.0.0.0/24. ...
0
votes
1answer
613 views

Win2008 - restrict VPN user permissions

Windows 2008 R2 SP1 Foundations file server with no AD, only workgroup sharing some folders, and now a RRAS server. Shared folders are open to everyone in the office (XPs and Sevens) without ...
0
votes
1answer
154 views

RRAS NAT Monitoring

I was wondering if I could monitor my RRAS (VPN) users TCP connection.I don't want to sniff data, however I need to log TCP port numbers and timestamps as well as corresponding users and local ...
0
votes
1answer
141 views

Server Hosted at Data center Internal IP address on hyper-v guest OS

I have a hosted server that’s located at a data center that I pay for monthly (www.liquidweb.com). The server is running windows server 2012 standard. The server is used to host a SQL database and a ...
0
votes
1answer
252 views

Configuring RRAS with WS2K8R2 VPC

I have configured a Server 2008 R2 instance in a VPC with 2 subnets. The server is configured as a DC, RRAS and CA and a NIC in each VPC subnet. SSTP VPN clients can reach the server but either the ...
0
votes
1answer
149 views

Cannot connect two users to windows's VPS's VPN

I have a private VPN server in my VPS using windows Routing and Remote access. Now I cannot connect from two devices (e.g. IPad and my Laptop) in same time. I tried to change the properties but I've ...
0
votes
1answer
266 views

windows server 2008 nat routing

I have a server running Windows Server 2008 R2 with one Intel physical interface supporting VLANs. There are basically four tagged VLANs: three local ones (192.168.20.0/24 [tag: 20], 192.168.30.0/24 ...
0
votes
1answer
307 views

share one vpn connection through windows rras with other clients

I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the ...
6
votes
0answers
1k views

Windows VPN server can talk to VPN clients, but won't send packets from its local network to the VPN clients

I want to configure Windows Server 2012, and its Windows 7 and Windows 8 VPN clients, with an SSTP VPN that uses split tunneling and off-subnet addressing, but I'm running into a problem: the RRAS ...
2
votes
0answers
372 views

IPv6 Not Routing Properly

I am setting up a RRAS machine for my personal use and for use by a few of my friends. I am currently using Windows Server 2012; but I have tried this with Windows Server 2008 R2. Both systems ...
2
votes
0answers
394 views

VPN client has severe intermittent connectivity issue with Windows 2008 RRAS server, but NOT with the other remote servers

I have a Windows 2008 server setup in the cloud as a RRAS running VPN access and NAT. It is joined to a domain controller also running in the cloud. A Windows 7 VPN client connects using SSTP to the ...
1
vote
0answers
16 views

VPN server stopped functioning with Windows clients

Our Windows 2003R2 VPN server (Routing and Remote access) no longer lets Windows clients (Windows 7, with the latest MS patches) connect. The client tries, and craps out with Error 806. This is PPTP. ...
1
vote
0answers
479 views

HyperV guest external IP: RRAS NAT on host VS direct access to external network with Microsoft Virtual Switch?

I have Win2008 R2 HyperV host with one physical adapter running a bunch of VMs. I have a subnet of external IP addresses: x.x.x.208 / 255.255.255.240 I used to have the following setup: host OS ...
1
vote
0answers
177 views

RRAS and Static Routes for VPN

I've searched and searched and cannot find an answer (that I can understand). Here's my situation: I've got an office network using IP addresses like 192.168.1.1-255 and a home network using the same ...
1
vote
0answers
2k views

Setting up Windows Server 2012 Foundation to route all Internet traffic through an OpenVPN connection using RRAS

First of all I'm not (yet) a fully trained IT professional but just a college student so please forgive me if some of the things I'm about to ask might seem "stupid" because the answers are totally ...
1
vote
0answers
693 views

RRAS with DHCP when the IP pool is on a different subnet

I run a small business network and the last couple of days I have been setting up some equipment to add VPN capabilities to our network. I've got the following set up: Windows 2008 R2 with RRAS - ...
1
vote
0answers
191 views

Using RRAS to route network traffic through a VPN to the internet

I was hoping someone could help me setup a RRAS server to provide the following functionality. CLIENT --> RRAS SERVER --> VPN --> INTERNET I've managed to get the client talking through the RRAS ...
1
vote
0answers
385 views

What steps can I follow to diagnose why PPTP VPN (rasClient) has suddenly stopped connecting?

I use my a Windows Server 2008 R2 workstation as a VPN client to a Windows 2003 RRAS VPN host. It has worked flawlessly for many months. All of sudden, rasClient stops connecting and throws: Error ...
1
vote
0answers
263 views

Windows Server 2008 DHCP with RRAS

I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP ...
1
vote
0answers
88 views

What is a “remote access profile” in RAS?

I am trying to understand how RRAS and NPS work together so I can see if it would make sense to implement the two in our environment and I see references in one of the Sybex books using the term ...
1
vote
0answers
320 views

After enbaling VPN/NAT on 2008 R2 direct access to server is blocked (RDP, FTP,…)

After setting up VPN with NAT over RRAS configuration menu in windows server 2008 R2, direct access to server is blocked. Does anybody know why is this happening? How to enable RDP, FTP, and other ...
1
vote
0answers
1k views

SSTP VPN Windows Server 2008 - Clients can't access Internet Through the VPN

I have setup a SSTP VPN connect and it is assigning the local IP address to the client, e.g. 192.168.0.10. The server has two NICs, private and public. The private is on a 10.180.x.x IP address and ...
0
votes
0answers
44 views

Windows RRAS server behind NAT to remote Fortigate via IPSec

I am about to deploy a Windows sever 2012 R2 RRAS server to connect to a FortiGate device via IPSec for site-2-site VPN. Phase 1 ending successfully, however, the Phase 2 failing, the Windows server ...
0
votes
0answers
30 views

RRAS 2012R2 NAT with isolated subnets

I'm trying to find a solution for this problem for many weeks I hope someone can help me. I have a rather simple network: Windows Server 2012R2 with multiple NICs A few subnets (VLANs) with DHCP's ...
0
votes
0answers
9 views

Windows Server RAS with two ips

I have one remote win2012 server with rras installed(1 external ethernet). I have two local users on this server "main" and "branch" with different ips on both(User-Properties-DialIn-static ips). How ...
0
votes
0answers
118 views

Routing and Remote Access with Hyper-V

I have a server setup with with Server 2012, this server has two NICs. One for WAN and one for LAN. Internet works fine on the server. I setup Routing and Remote Access with DNS and DHCP. Everything ...
0
votes
0answers
233 views

Windows Server 2012 RRAS/NAT with PPPoE Modem

I'm trying to connect to a BT Openreach VDSL Modem with Windows Server 2012 R2 Essentials, I have RRAS with NAT set up. My server looks like this; NIC 1 - Into a TP-Link Switch to connect a myriad ...
0
votes
0answers
89 views

Persistent PPTP 807 through a single 877w edge router

Im setting up another vpn for cleaning malware infected computers remotely and some other things, Normally id use SSTP nat tcp 443 and be done in 5 minutes but in this case I need to use another ...
0
votes
0answers
387 views

Hyper-V server with multiple subnets and Active Directory Policies and adding domain objects to local groups not working

My lab is a test HP computer connected to a port on my wireless router. It is running Windows 2012 R2 with the Hyper-V role and I am trying to simulate multiple testing subnets to test a number of ...
0
votes
0answers
91 views

How do I get RRAS to forward all traffic destined to a particular external IP to a particular internal IP?

I have a dedicated Windows 2012 server at a host that will allow me to run Hyper-V, but I cannot use bridged networking. I would like to get RRAS set up so that my VMs can act like they have public ...
0
votes
0answers
817 views

Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN ...
0
votes
0answers
59 views

Unable to access network resources on SSTP connection

I am attempting to get a SSTP server online, I have managed to successfully connect a client to the server via SSTP however the client cannot access any network resources outside the SSTP gateway ...
0
votes
0answers
44 views

Weird RRAS issue

I am all of a sudden having a weird issue with my server hosting RRAS. about 2 weeks ago my RRAS client suddenly losses network communication with the remote LAN but the RRAS MMC shows that the client ...
0
votes
0answers
116 views

Cannot ping RRAS Client from RRAS server

I have recently created an RRAS pptp connection for an outside network. The RRAS client connects fine and can ping the RRAS server and every device on the RRAS servers local network. The RRAS server ...
0
votes
0answers
230 views

Repair RRAS and NAT on Windows Server 2008 R2

We have a Windows Server 2008 R2 server with RRAS installed and configure with VPN and NAT. NAT stopped working and when I checked, IPv4 is missing . I've tried re-installing RRAS but it just ...
0
votes
0answers
148 views

L2TP VPN disconnects on sustained file transfer from server LAN computer to VPN client

VPN Server: Windows Server 2008 x86 RRAS installed and running All necessary firewall ports are open, I no longer get rejected log entries Behind router which is DHCP, serving 192.168.0.2 to ...
0
votes
0answers
202 views

Configure RRAS to send DNS search domain to Mac L2TP VPN client

Is there any way to make RRAS send the default search domain (ie the connection's search domain, the FQDN of the domain in question) to Mac clients who connect via L2TP? Or is this something that just ...
0
votes
0answers
69 views

Windows 2003 Multiple Internet Connections

I have a Windows 2003R2 webserver and I am trying to set up multiple internet connections, but I am having issues. The server has 3 nic cards and we have 3 internet connections (ISP1, ISP2, Lan/ISP3) ...
0
votes
0answers
306 views

Windows Server 2012 RemoteAccess 20106

I was running RRAS on my Windows Server 2012 before and now I uninstalled the role but I still get an Event ID 20106 from RemoteAccess which says Unable to add the interface {guid} with the Router ...
0
votes
0answers
390 views

Lost internet connection after configuring RRAS on my Windows 2008 R2 server

I've tried setting up a VPN server on my Windows 2008 R2 virtual server using the steps outlined in the following link: ...
0
votes
0answers
134 views

Windows 2008 RRAS VPN Users can resolve DNS but not ping to internet or surf internet when connected

I am setting us a Windows 2008 R2 Rras server on internal network 10.70.0.231 there is a DC running with DNS and DHCP on 10.70.0.230. Users are assigned 10.70.0.50-100 when connecting to VPN in RRAS. ...
0
votes
0answers
663 views

RRAS PPTP VPN Connected but not get ping my local LAN

Two days back i had configure RRAS VPN server on Windows server 2008 Std R2 with two (LAN (192.168.100.173 with 255.255.255.0 subnet, without gateway,no DNS -- only ip Address was there) / WAN ...