-1
votes
1answer
72 views

IBM ServeRAID 2 channels SCSI controller compatible with IBM x366 server which use SAS onboard?

I own an IBM x360 server in which I have an IBM ServeRAID 2 channels SCSI controller for which I use the two channels. Channel 1: the server's HDD. Channel 2: IBM EXP300 HDD Enclosure. Will this ...
0
votes
1answer
2k views

Error messages in x3550 related to hard drives not detected at bios level

I have an IBM x3550 when I start it I get the following messages: no logical drives found no int 13 drives to support bios not installed I go into diagnostics and I noticed that SCSI ...
2
votes
2answers
2k views

Can IBM System x3650 passthrough SAS?

I am looking at the specs and manual for the IBM System x3650. According to the specs a ServeRAID-8k-l hardware RAID comes standard, but there's an option to upgrade to ServeRAID-8k. If I understand ...
1
vote
1answer
72 views

Does the order of SAS drive matter when installing old drives?

I have an old IBM server with 12 hard drive bays, 4 of which are used (SAS 72GB drives), and configured in a RAID 1 array. The server will be sent away for repairs, when it comes back, do I need to ...
0
votes
1answer
1k views

IBM System x3500 M3 refuses to boot from LSI SAS card if blank SATA drive is connected on mainboard

Have an IBM System x3500 M3 that refuses to boot from the IBM branded LSI SAS card if any SATA drive is also connected to the mainboard. The system restarts itself over and over. No error messages. ...
1
vote
2answers
1k views

Need help finding a SAS HBA controller for an IBM LTO 4 Tape Drive

I've got an older IBM x3200 M2 Server (MT: 4368) and I recently acquired a used internal IBM LTO 4 tape drive (FRU: 45E1125). The back of the tape drive requires an Internal SAS 29 pin connector ...