0
votes
0answers
10 views

SMART output - what's the significance and meaning of “verify” errors from smartctl -a for a HDD

Does anyone know the meaning of "verify" errors listed in the output of smartctl -a (or more precisely smartctl -l error), as well as their significance, if any, in trying to evaluate the health of a ...
0
votes
2answers
75 views

SAS disk error. should I replace my drive ASAP?

When I try to reboot UBUNTU server boot prints that he find "Foreign configuration" on the adapter. When I boot from secondary (/dev/sdc) disk and run fsck it show me some errors on the first disk. ...
2
votes
1answer
160 views

GNU/Linux: SAS-disk detected as /dev/sg7 - not as /dev/sdb

I have just installed a SAS disk into a Debian server. It was detected correctly and everything was fine. Then I moved the SAS disk to a different Debian server, the same hardware model and running ...
0
votes
0answers
176 views

How is the boot order of SAS drives determined?

This probably seems like a simple question, but hear me out. Here's the scenario that caused me to ask this question, as this is not so much a "how to" question but a "why" question: I was trying to ...
1
vote
0answers
58 views

SAS/SCSI Errors in Syslog: Kernel FAILED

I have a Dell 2950 2U rackmount server with 3 146GB SAS drives in a RAID array, running Slackware 10.2 (an old version, I know). Recently I am seeing these errors in my /var/log/syslog repeating very ...
0
votes
2answers
1k views

RHEL5 do not see sas tape library

We have a tape library which is connected to a server by SAS link. Server is running OS Linux. OS doesn't see the tape library in /proc/scsi/scsi . We tried to rescan scsi bus(*1), but it didn't help. ...
2
votes
1answer
748 views

Where did the free space go?

I have installed CentOS 5.7 64 Bits in my server which has 4x300 GB SAS drives on hardware RAID 10. At the installation, I chose default partitions. Here are the commands output: [root@server ~]# ...
2
votes
1answer
1k views

Linux Multipath + SAS Array, “device errors” are logged to dmesg for passive paths? Possible to stop this?

I have two OpenSuSE 11.4 hosts connected to an LSI CTS2600 storage array via SAS. Every time I reboot the hosts, I see in dmesg output like [ 255.942890] end_request: I/O error, dev sdg, sector ...
2
votes
1answer
775 views

How can I enumerate SAS addresses/WWNs in Linux?

I have some SAS devices in a server, I would like to find out what their SAS addresses are. How can I do that in Linux? I'm using CentOS 6.
2
votes
3answers
3k views

Linux / Multipath not using all paths, and won't use queue-length path_selector?

I have the following hardware: 2x SuperMicro servers (128GB RAM, 2x 8 core AMDs) 2x/server LSI SAS2008 PCIe MPT-Fusion2 HBAs (2 SAS ports per card) 1x LSI CTS2600 DAS with 24x W.D. 15.7k RPM 600GB ...
1
vote
1answer
661 views

Adaptec 1405 or HP SmartArray P212 SAS controller supported in the stock RH 5.5 kernel?

I am ordering a custom server and looking at either an Adaptec 1405 SAS controller, or an HP SmartArray P212 to use for the internal SAS Ultrium drive (HP Ultrium LTO-4 1760). The server will be ...
0
votes
1answer
219 views

Read LUN from dell SAN with a PC on linux

We are currently using a md3000i DELL SAN server with a RAID1. I would like to access the information on one disk from a workstation. The hard disk contains 2 LUN but I can only access the first ...
9
votes
1answer
1k views

Improving SAS multipath to JBOD performance on Linux

I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* ...
0
votes
3answers
1k views

Cloning old RHEL 4.3 on Dell Poweredge 2850 to PE2950 with SAS PERC6i

I have a Dell PowerEdge 2850 with a PERC 4 controller and SCSI drives. I need to clone that to a PE2950 with a PERC6i with SAS drives. I've used the DKMS package along with the latest driver on ...