Serial ATA (SATA or Serial Advanced Technology Attachment) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace the older ATA (AT Attachment) standard (also known as EIDE), offering many ...

learn more… | top users | synonyms

0
votes
1answer
347 views

Mount dell perc (megaraid) partitions on linux box without hardware raid

I have sata hard disk extracted from Dell server with perc 5i. I need to save data on another linux box, without hardware raid. Is it possible? How? I know there are two partitions on this disk, but ...
1
vote
0answers
221 views

Proliant dl 180 g6 install normal SATA drives

I have a Proliant DL180 G6 with problems in the P410 controller. I want to instal normal SATA drives in the server. I see the mother has 4 SATA slots but I can´t find how to power the SATA drives ...
4
votes
1answer
279 views

Same hard drive problems in dmesg on several servers

We have a couple of these SuperMicro MicroCloud units. In total we've got 16 servers (2x8) which all randomly spew these messages in dmesg: [4661350.802707] ata2.00: failed command: WRITE FPDMA ...
1
vote
0answers
42 views

Why my SSDs are in /dev/hdx instead of /dev/sdx on CentOS 5.9?

I have two SSDs Kingston SH103S3240G plugged on SATA ports of my Intel Server Board S3000AH. The SSDs apear like a PATA device (hdx instead of sdx) on my CentOS 5.9. I'm having problems related to ...
-2
votes
3answers
156 views

How could all of my hard drives fail at once? [closed]

I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I ...
-1
votes
1answer
187 views

How does plugging in a SATA drive to an SAS backplane affect maximum cable length?

The limit on SATA cable length is 1m, whereas the limit on SAS cable length is 10m. When using a backplane which advertises support for SAS and SATA, with a SAS RAID controller and one SATA drive, ...
9
votes
2answers
393 views

Are SATA 1, 2 and 3 cables interchangeable?

I've got an older SATA drive (not sure if it's SATA 1 or 2). Same size plug as my new SATA 3 M/B. Are the cables interchangeable? Any decrease in performance from using a "lower" cable?
2
votes
2answers
1k views

Can I put in laptop 2.5" SATA drives into an HP ProLiant DL380 G5?

I have an HP DL380 G5 server and I was wondering if can I put in standard notebook 2.5" SATA drives? In the front where the drives go, the SATA connections dont seem to fit.
3
votes
1answer
340 views

Connecting our first tape drive (SAS) to SATA bus

Our small team is considering buying our first tape drive for backups. However, we are still lacking serious enterprise-grade servers and have to rely temporarily on SATA drives in our rigs. Cost ...
1
vote
3answers
452 views

Upgrading server motherboard while maintaining 12 SATA ports

My office has been using a FreeNAS server that was built with desktop hardware. We use it for storing RAW photos (~50mb each). We have 3 workstations that access (browse, retouch, save) the files ...
6
votes
1answer
6k views

How exactly does a SAS SFF-8087 breakout cable work? + RAID/connection questions

Please let me know if my question does not makes any sense as I am not sure if I am interpreting it correctly from my thoughts due to my lack of technical knowledge on this. If I am using a ...
1
vote
2answers
891 views

Dell PE 2950 PERC 6/i Controller. How to add 2TB local SATA as a Raw Disk Mapping to ESXi 5.1 VM

Dell PE 2950, PERC 6/i Controller. - ESXi 5.1 installed/Boot from USB drive. 2 x 1 TB SAS drives in RAID 1 - Datastore1.1x 2TB SATA drive set as RAID 0. We wish to host all our VMs from Datastore1 ...
5
votes
2answers
1k views

HP 4TB SATA Midline in D2600 - what disk make is HP using & why WD RE4 don't work?

Does anyone know what make of disk HP are using in their 4TB SATA Midline & why WD RE4 don't work? So we use D2600 crates with HP 2TB disks, and just buy WD2003FYYS - pop them in old HP caddies. ...
-5
votes
1answer
73 views

How to connect 12 SATA 3 disks to a server with GA-790XTA-UD4 board [closed]

How can I connect 12 SATA 3 disks to a motherboard that has just two SATA 3 connectors. What solution would you recommend?
0
votes
1answer
40 views

Moving Harddisk to other server

I have a situation that required to move 3 SATA hard Disk from a Dell T100 to T350 Server. This was working 90% ok and the Windows 2008 server started fine need only install Drivers. HD 1Tb ...
1
vote
1answer
350 views

Dell R210 eSata not recognizing Sata Drive

We have a Dell R210 with an external Sata connection. When connecting the Sata drive through the eSata connection, the server does not recognize the additional drive. What we have tried: Verified ...
2
votes
2answers
1k views

RAID card w/1x mini-SAS connector : how do I physically connect 16 disks?

I'm looking at a MegaRAID SAS 9240-4i Sgl card which has a single X4 Mini-SAS SFF8087 connector. As far as I know, such a connector can be expanded to 4 SATA disks. So, I would know how to connect 4 ...
1
vote
0answers
200 views

SATA port multiplier : what do I need? [closed]

I'd like to set up a machine with 10 or 12 discs, but SATA controllers which supports that amount of drives are hard to get for a "reasonable" price. However, I've recently learned about port ...
1
vote
1answer
231 views

replace SCSI raid controller with SATA on SBS 2003

Is it possible to add a second raid card (there is a second pci-x slot) that uses SATA and transfer the current contents of the SCSI card's HDDs to the new larger SATA HDDs Background: I bought 2 new ...
1
vote
1answer
283 views

Can the Intel C600-series SAS controller RAID SATA drives?

(Sorry if this is off-topic - technically this is a home workstation setting, but is regarding mostly-server technology.) I have a GA-X79S-UP5-WIFI motherboard and four ST3000DM001 drives, and the ...
1
vote
1answer
123 views

Motherboard rejects identical hard drive, one works the other doesn't

I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took ...
0
votes
2answers
291 views

RAID 1 after install and two controllers

I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup ...
1
vote
3answers
3k views

Using SATA drives with SAS shared backplane?

Is it possible to use SATA drives when you have a SAS shared backplane to be able to address the drives?
1
vote
2answers
161 views

SSD for database or webpage files? [closed]

I can have SSD for the mysql data files and system or the website files (.php files, images, video). I can not have both because of the SSD capacity I have. What would be best, to make Windows 2012 ...
3
votes
1answer
225 views

Abort raid6 expansion on Adaptec 52445 SATA RAID?

I am expanding my raid6 array from 18x2Tb to 20x2Tb disks and after 3 weeks status shows: Logical device Task: Logical device : 0 Task ID : 105 Current ...
0
votes
1answer
118 views

Lost RAID partition for no clear reason [closed]

We have some machines with a RAID 1 out of two 2TB hard drives. Now it has been found to the error that the partition was not recognized from OS (Windows in most cases). In the configuration menu ...
-3
votes
2answers
418 views

Connecting a SAS server drive with SATA USB cable + Converter [closed]

I'd like to connect a SAS drive (ST3600057SS) to my computer via a USB SATA cable combined with a SAS to SATA converter. This doesn't work and I would like to know why and if there's any way around ...
2
votes
3answers
2k views

Can I use a Smart Array P410 controller on a HP Proliant DL 180 G5 server?

This link says the HP Proliant DL 180 G5 server only supports Smart Array E200, E500, P400 and P800 controllers. Can I use a Smart Array P410 instead? Currently the server has only the default ...
2
votes
1answer
379 views

Broadcom HT1100 SATA controller not working properly with 1TB drives

I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux ...
2
votes
2answers
480 views

Do SATA disks on an SAS backplane impose cable length limits?

On two Supermicro 847E16-RJBOD1 enclosures, I have trouble accessing SATA disks on the rear backplane with 6gb/s. The only significant difference between rear and front backplanes is total cable ...
-1
votes
3answers
206 views

How to arrange 2 SSD with 2 SATA? [closed]

I like to have best io performance as well as good capaciyy and reliability out of a server that hosts a busy forum, which involves loads of static files download. I am wondering what is the best plan ...
0
votes
1answer
426 views

ML 350 additional SATA RAID controller (mirror only)

I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up ...
-1
votes
2answers
427 views

K8NDRE motherboard in server fails to complete BIOS load with error 0078

K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition ...
0
votes
2answers
295 views

Preventing h/w RAID cards from dropping slow JBOD disks

I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it ...
12
votes
1answer
169 views

ssd firmware, linux: updating large batch of drives

I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's ...
1
vote
3answers
1k views

Can I reuse HP Proliant SCSI drives in a custom build?

I have an old HP Proliant DL385. Can I use the drives (36.4 GB - 10k, ULTRA320 SCSI) on a custom build, or is the interface a proprietary HP specific one? What support do I need from the motherboard? ...
2
votes
1answer
251 views

3.5" SATAs in an HP DL580 G4

I've been tasked to marry a bunch of 3.5" SATA drives with an HP Proliant DL580 G4 server. Trouble is, this server only takes Small Form Factor harddisks. How can I make this happen in the most ...
5
votes
1answer
953 views

Is there way to read sectors from SATA drive without ECC correction?

I know, there was such possibility like that in old ATA standards: "READ LONG" command produced LBA sector + ECC payload. sg_read_long supports in in linux, but the command is obsolete for quite a ...
0
votes
2answers
1k views

Does VMWare ESXi 4.1 work with SATA hard drives?

I'm confused about the hard drive requirements to use VMWare ESXi 4.1 I conducted an experiment on an old desktop PC with a SATA hard drive and it couldn't find it. I'm now ready to go to production ...
1
vote
2answers
334 views

Are there different kinds of Mini SAS to 4x SATA reverse breakout cables?

I have an RPC-4224 case that has 24 bays with 6 Mini SAS ports. I needed a cable to break out one of them into 4 SATA ports, so I went down to my local Fry's Electronics and bought one. The cable came ...
7
votes
3answers
4k views

Deciphering continuing mpt2sas syslog messages

Summary I have been getting these cryptic messages in syslog since I installed some new hardware and I can't figure out what the problem is, if it's serious, or what to do about it. They're from the ...
0
votes
1answer
102 views

External 2.5" enclosure SATA power only [closed]

we have these mini-SAS PCIe SATA III controllers. Mini-SAS enclosures seem to run about $500, but I can use a $10 mini-SAS-to-SATA adapter cable so then all I need is an external enclosure that ...
-1
votes
2answers
1k views

PERC 6/i will not find my SATA drives

I got a PERC 6/i for our build-system machine running ESXi 5.0update1. The hardware is a MSI X79A-GD65 with Intel X79 chipset, Extreme i7 CPU. I also got a SFF8484->4xSATA cable and connected it to 4 ...
2
votes
2answers
421 views

DL140 G3 HP Embedded SATA RAID Controller, max 750 GB drives. Really?

I have a DL140 G3 and according to HP's documentation the max capacity SATA drive I can put on the HP Embedded SATA RAID Controller is 2x750GB. If I put a 2TB drive in here will something terrible ...
0
votes
0answers
737 views

ata: failed command: WRITE FPDMA QUEUED / hard resetting link

I'm getting a ton of errors like the following during a raid rebuild after replacing a harddisk. SMART values of the new disk look perfectly fine. Are the errors likely to be caused by a faulty disk, ...
0
votes
1answer
388 views

unable to recover data from failed hdd [closed]

my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total ...
2
votes
3answers
2k views

How to reduce the SATA link speed of drive in CentOS?

How do I make CentOS run SATA drives at 3Gb/s at boot? Background: I'm having an issue with a motherboard that claims to support 6Gb/s SATA transfer speeds, but when using 4 drives on it, in a ...
6
votes
2answers
2k views

HP ProLiant DL380 G4 SATA support?

I'm planning to get a second hand HP Proliant DL380 G4 and setup it as storage server, probably using NexentaStor and setup a ZFS system. But now I wonder does DL380 G4 can be convert or support SATA ...
0
votes
2answers
333 views

Server crash mount XEN Server sata disk

Our Xen Server crashed and we try to mount the sata disk on an other linx to save the VM's. But unfortunately we are unlucky because the only thing we see is a lot of strange LV mounts. When we do an ...
1
vote
1answer
2k views

What is the max supported number of SATA devices (using cable adapters) on a Dell SAS 6/iR adapter?

I've got a Dell SAS 6/iR PCI-E adapter. I don't have a multiplier backplane. I'm planning on connecting SATA (non SAS) drives. If I buy cable adapters only (ones that split a SAS connector on the card ...