Serial ATA (SATA or Serial Advanced Technology Attachment) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace the older ATA (AT Attachment) standard (also known as EIDE), offering many ...

learn more… | top users | synonyms

1
vote
2answers
364 views

P410i smart array controller SATA drive recommendations of known working models

Background: my company needed some internal, reliable servers for internal data. (we normally use cloud). Being a small company, we have scanty budget, but also flexibility. We picked up a number ...
1
vote
1answer
5k views

ProLiant DL380p not recognising HP hard drives on boot

I have two ProLiant DL380p rack mounted small factor servers. I have installed the following drives onto both servers: 1x 240GB SSD drive (Crucial NOT HP branded) 2.5" SATA 7.2k rpm 1TB ...
1
vote
3answers
4k views

Can Dell PE 1950 with SAS Controller take SATA drive? [closed]

I am a programmer (not an expert hardware engineer) trying to build a small hadoop cluster at home (at a cheaper price point) for processing some datasets of interest. I am getting these Dell PE ...
1
vote
2answers
2k views

Dell PE 2950 PERC 6/i Controller. How to add 2TB local SATA as a Raw Disk Mapping to ESXi 5.1 VM

Dell PE 2950, PERC 6/i Controller. - ESXi 5.1 installed/Boot from USB drive. 2 x 1 TB SAS drives in RAID 1 - Datastore1.1x 2TB SATA drive set as RAID 0. We wish to host all our VMs from Datastore1 ...
1
vote
1answer
4k views

What is the max supported number of SATA devices (using cable adapters) on a Dell SAS 6/iR adapter?

I've got a Dell SAS 6/iR PCI-E adapter. I don't have a multiplier backplane. I'm planning on connecting SATA (non SAS) drives. If I buy cable adapters only (ones that split a SAS connector on the card ...
1
vote
1answer
105 views

What speed are the internal drives in a PowerEdge R515

Not much obvious information on the net on this one - in fact, it was a surprise to me that the 12-bay R515 even had internal 2.5" cabled drives. We're considering sticking in a couple of high-speed ...
1
vote
1answer
631 views

Replacing a PERC S300

The PERC S300 card that came with our Dell PowerEdge T110 servers is Windows only (see here). As a result, we're looking for an alternative that works under Linux. We had planned to use software RAID ...
1
vote
1answer
1k views

How to enable SATA in Centos 5?

I have a centos 5 linux box which is currently running off an IDE drive. I want to install a couple of SATA drives as backup drives for now. I have googled that there can be complications with SATA ...
1
vote
1answer
237 views

PERC 6i With external Enclosure Raid Questions

Okay so I am buying some used hardware on ebay and found a few poweredge servers for a good price. These servers come with a PERC 6i card and 4x 146gb internal SAS drives. I want to purchase a 8 Bay ...
1
vote
1answer
1k views

Does the PERC 5/i Integrated controller support SATA II/III?

I have a refurb 2950 with a PERC 5/i Integrated controller. Currently, there are 4x 3.5" SAS drives in use, with two slots available. I want to add two SSDs (using a 3.5" ICY dock) in RAID1 in the ...
1
vote
2answers
486 views

HDD-Errors while building Software-RAID5

I want to build up my new NAS with CentOS 6 or Scientific Linux 6, but I am not able to build the RAID5. I created a new RAID-device using mdadm, but after some hours of work, mdadm marked one or two ...
1
vote
1answer
217 views

SATA card with good hotswap ability

I'm building a Win2k8 backup machine with a removable SATA drive enclosure. The idea is that each week someone will pull out a drive and pop another one in. I need this to work without having to ...
1
vote
3answers
276 views

SATA3 and backwards compatability

Hay guys, I'm making a NAS for serving my files around my network. I bought a motherboard, a MSI KM4M-V Micro ATX. the spec says that it has "2 SATA 1.5Gb/s connectors". I'm however find these drives ...
1
vote
2answers
2k views

Data Recovery on faulty sata drive that is not being properly detected in Windows

My computer is configured with two sata HDDs. The primary one crashed the other day and now I am trying to recover the data that is on it. I've plugged the faulty HDD into a machine where the primary ...
1
vote
0answers
27 views

Server throwing error on drive: status: { DRDY ERR }, error: { ABRT }, failed command: READ DMA EXT

I have a server from Red Barn that has been throwing errors accessing its local SATA flash drive. Here are some facts: I'm running Ubuntu 15.10, although two other similar Supermicro servers are as ...
1
vote
2answers
80 views

ESXI 5.5 Doesn't see full hard drive

I have an ESXI 5.5 host which I've had up for a while (whitebox build) and I've recently replaced one of the internal hard drives due to failure (not raid, directly connected to the SATA controller). ...
1
vote
0answers
120 views

Proliant ML350 G6 - Installing a 2TB drive only recognises it as 250gb and Fails [closed]

I have purchased 2x Seagate Enterprise SATA 2TB 2.5" drives, but when they are loading into 2 new hot plug slots the HP software is only recognising the drives have a capacity of 250gb. I have tested ...
1
vote
0answers
109 views

HD recognized by BIOS but not Linux or GParted

I have an old (2007) Dell Precision Workstation 690 with Ubuntu 12.04. It has 2 mirrored 139G SAS drives for OS and 2 WD Black 2TB data drives that were formatted ext4 and rsynced and had my virtual ...
1
vote
1answer
74 views

3rd party HDDs in Dell Poweredge r805

I have a Dell Poweregde R805 Server that came with two 147GB 10K SAS drives. To stack up the storage on this machine, i purchased two SATA drives (HGST Travelstar Z7K500, 500GB, 7200RPM, SATA III). ...
1
vote
1answer
313 views

Difference “SATA style SAS connector” (SFF8482) and SATA

I own a tape drive with a SATA shaped connector on the backside, but the datasheet says it should be connected to SFF8482. I saw, that SFF8482 is usually converted to up to 4x SATA connectors, so my ...
1
vote
1answer
1k views

hot plug sata to ESXi 5 server

Is it possible to hot plug an eSATA drive to an ESXi 5 server? I'm exploring backup solutions and hoping to hot add a datastore, copy my VM's over, then hotunplug.
1
vote
0answers
521 views

Proliant dl 180 g6 install normal SATA drives

I have a Proliant DL180 G6 with problems in the P410 controller. I want to instal normal SATA drives in the server. I see the mother has 4 SATA slots but I canĀ“t find how to power the SATA drives ...
1
vote
0answers
54 views

Why my SSDs are in /dev/hdx instead of /dev/sdx on CentOS 5.9?

I have two SSDs Kingston SH103S3240G plugged on SATA ports of my Intel Server Board S3000AH. The SSDs apear like a PATA device (hdx instead of sdx) on my CentOS 5.9. I'm having problems related to ...
1
vote
1answer
625 views

Dell R210 eSata not recognizing Sata Drive

We have a Dell R210 with an external Sata connection. When connecting the Sata drive through the eSata connection, the server does not recognize the additional drive. What we have tried: Verified ...
1
vote
1answer
439 views

Can the Intel C600-series SAS controller RAID SATA drives?

(Sorry if this is off-topic - technically this is a home workstation setting, but is regarding mostly-server technology.) I have a GA-X79S-UP5-WIFI motherboard and four ST3000DM001 drives, and the ...
1
vote
0answers
516 views

3ware 8506, Solaris (Nexenta Core) and the tw driver: driver (tw) successfully added to system but failed to attach

I've got a little Nexenta Core box at home that's doing NAS duties. Recently, I bought a second hand 3ware 8506 12-port SATA controller to go with the Supermicro AOC-SAT2-MV8 controller that I already ...
1
vote
0answers
944 views

SAS vs SATA vs SSD: How to measure performance difference between SATA and SAS?

SAS drives can address multiple IO operations from a single platter revolution if the data happens to be where the head is already positioned. How can you measure whether this actually makes a ...
1
vote
1answer
195 views

Your experience with JBOD “raw” SATA setup

I need a cheap setup to store historic snapshots of a dataset in the 100-200GB range. These will see little use, but need to be kept online for some time (shared by Samba). The box housing the dataset ...
1
vote
0answers
243 views

Western Digital 1TB SATA and PE 860 using SAS 5 Problem Writing to Drives RAID1

I've got a Dell PE 860 that I recently took out of service to re-purpose. I upgraded the memory from 2GB to 8GB, and replaced 2 80GB WD 7200RPM SATA drives with 2 1TB WD 5400RPM SATA drives. Installed ...
1
vote
1answer
185 views

Win2003 R2 - 1.5TB disks not identified

I just installed 4 1.5TB hard disks (WD) in two servers (2 in each). Upon reboot they are not showing up in the disk manager whatsoever. I'm running Windows Server 2003 EE (32bit) with 8GB ram. They ...
1
vote
2answers
2k views

connecting SATA SSDs to SAS

Is there any performance loss when connecting a SATA SSD to a SAS controller? Edit: Assume the controller doesn't have SATA connectors and I use a SATA to SAS interposer. Will there be any performance ...
0
votes
4answers
2k views

FATA disk performance for VMware

We are moving to the dataceneter and planning to have tiered storage on EVA4400 - FC RAID 10 for SQL databases and RAID5 across 24 FATA 1TB disks form VMware ESX guests.HP is describing FATA disks ...
0
votes
2answers
2k views

Does VMWare ESXi 4.1 work with SATA hard drives?

I'm confused about the hard drive requirements to use VMWare ESXi 4.1 I conducted an experiment on an old desktop PC with a SATA hard drive and it couldn't find it. I'm now ready to go to production ...
0
votes
2answers
238 views

Windows Server making hard disk accessible after moving to a new installation

I have a serial ata disk running windows server 2003 in an old setup and now our company wanted to upgrade the system. We got a new computer and I transfer the hard disk from one setup to the other. ...
0
votes
2answers
6k views

SAS to SATA adapter?

Is it possible to have a SAS to SATA. e.g the server has SAS onboard, and I want to use SATA drives instead of the SAS ones (cheaper and easier to source here in Australia). They have cables on this ...
0
votes
1answer
360 views

What can I do about the 2 SATA harddrives no longer showing up even in BIOS?

I've been trying to setup Ubuntu but have been running into countless issues. Both the 500GB drives has now become undetectable and don't even show up in BIOS. I've detailed below the process I've ...
0
votes
3answers
266 views

Removable SATA backup drive corruption

Currently we have 2 SATA hard drives housed in removable enclosures (NTFS partitions). Each week the drive is swapped out with the other one after the backup job has completed. The files that are ...
0
votes
3answers
142 views

Adding a 2nd Hard drive causing intermittent restart on server

I'm in the middle of configuring a server with circa 6tb storage. I've got 8x 1TB drives, using a 3ware RAID card (9650SE) The server also (currently) has 1 additional 250gb SATA drive, with the OS ...
0
votes
3answers
2k views

Does software RAID-0 really improve performance?

I am going to lease a server and I have two options, SATA or SSD, I decided to save the money and go for the SATA option. But I do not need all that storage they are giving me! So I thought MAYBE I ...
0
votes
2answers
315 views

RAID 1 after install and two controllers

I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup ...
0
votes
4answers
9k views

SATA hdd errors

I have one server with WDC WD3202ABYS ... There are 100 virtual hosts. Server is working about 5 years and in this time period I have change 4 disks. All with same reason: sata error. The last one: ...
0
votes
1answer
692 views

ESXI with non standard hardware HDD issues

I have 3 very underutilized servers that I am condensing to one of those shuttle PC's with VMWare ESXi The HDD seems to be the bottle neck right now (the light is almost always pure solid) right ...
0
votes
2answers
57 views

What types of workloads require SAS disks compared to SATA?

I am looking to outfit my new server (new to me) with larger capacity disks. The server right now has 4 SAS 146GB disks in it. My original thought was to just buy larger SAS disks and replace or add ...
0
votes
1answer
601 views

unable to recover data from failed hdd [closed]

my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total ...
0
votes
5answers
5k views

HP Proliant ML110 G6 as first file server (RAID)?

Bit of a noobie and this will be the 1st server hardware I have purchased. We are a small design studio and I am about to buy our 1st server. I have successfully run Ubuntu on an old PC which has ...
0
votes
2answers
2k views

SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) ...
0
votes
1answer
30 views

Is it possible to replace the SATA CD-ROM to SATA HDD\SSD on my dell R610?

Like many people, I do not use a CD-ROM on my server is it possible to replace the SATA CD-ROM to SATA HDD\SSD on my dell R610? Thanks
0
votes
1answer
27 views

Which bandwith can i expect, when i´m running a SATA SSD on a SAS interface?

So, i know this question had been asked before. I consider to buy a SSD for my Server, because i kinda hate the SAS HDDs in there. I thought: If i connect a SSD, which, in fact, handles way more ...
0
votes
2answers
355 views

How to connect a SATA / ESATA / USB 3.0 device over Gigabit Ethernet

I am looking for a way to connect an 5.25 SATA removable drive bay from CRU to our HP Proliant 360 blade server. Unfortunately the server has no support for USB 3.0 and no free PCI slot to upgrade USB ...
0
votes
3answers
257 views

Attaching SATA device disturbs boot order

I'm running a Supermicro X7DCA board in a NAS server. Whenever I plug in a sata disk the boot sequence goes out of order. This is a problem, because it is running headless. I've had this problem ...