The 2012 version of Systems Center Configuration Manager, a product by Microsoft that is used to manage the Configuration of multiple Windows,Mac, and Linux-based systems.

learn more… | top users | synonyms

1
vote
2answers
25 views

SCCM 2012 Windows PE issues

Just got some lenovo X240, i7 with touch screen.. I got two issues when trying to enter Windows PE. (PE enviroment is 8.1) 1: First of all I don't get anything in the 'image selection: .. its ...
2
votes
0answers
21 views

Is it possible to set up a multi-boot system with SCCM?

I'd like to have a single test computer that would have multiple images being used by my users, and whenever one of them is having issues with a particular image, I'd like to be able to boot into that ...
0
votes
1answer
48 views

SCCM Queries for Microsoft Visio Standard or Professional

I am after a query that will show me whether workstation have a professional or standard version of an office product like visio 2010. I have the following which I have found on here, but can not ...
4
votes
3answers
133 views

Windows updates not installing. 0x87d00244

We are using SCCM 2012 SP1 CU5 (5.0.7804.1600) and on many of our Windows 7 clients updates are not installing. When I run "Machine Policy Retrieval & Evaluation Cycle" the ...
0
votes
0answers
26 views

Receiving time out errors (0x80072ee2) in all my logs (ScanAgent.log, WindowsUpdate.log, and WUAHandler.log)

I am currently going through a pilot deployment at a remote site that is connected to the Datacenter over a VERY slow WAN link (less than 3Mbps) and I am receiving time out errors (0x80072ee2) in all ...
5
votes
1answer
86 views

How to Configure A Software Update Baseline in SCCM 2012

I have a remote site that has about 70 systems that have not been patched for the last 4 months due to the WSUS server going down and I am now just getting around to deploying SCCM 2012 there. Can ...
1
vote
1answer
55 views

SCCM 2012 PXE Boot Image selection

I know that within a task sequence you can select a boot image for that task sequence to use. However, before you even get that far, when the computer first starts up, the SCCM/WDS server picks an ...
0
votes
1answer
59 views

custom disk partitioning using clients in sccm 2012r2

I'm using sccm2012r2 to deploy OS on clients. every thing is OK .but after installation completed I realized that SCCM partitioned disk and deleted all previous data. my question is that how to config ...
2
votes
0answers
334 views

Installing SCCM Client 2012 failed: “CcmSetup failed with error code 0x80004002”

We're using Microsoft System Center Configuration Manager 2012. And I have issues installing the SCCM Client on a Windows XP Prof SP3 PC. The Log on the XP machine says: Failed to query BITS 2.5 ...
0
votes
1answer
37 views

system center configuration manager SUP and DP in the same box

I 've got system center configuration manage installed and Software update point and distrbution point are in the same server . after getting Updates from Microsoft and deploying them I understood ...
0
votes
0answers
37 views

Should multiple Software Update Points in Configuration Manager 2012 R2 use a shared database and content directory?

Scenario: using System Center Configuration Manager 2012 R2, I want to create two Software Update Points in the same site, and they should share the load and allow for failover. According to the ...
0
votes
1answer
52 views

Permissions for SCCM Service Account

Does anyone know what is the least privileged Active Directory security group needed for the MS-SCCM 2012 service account to do software updates via Configuration Manager? ConfigMgr runs fine with ...
0
votes
1answer
32 views

SCCM Adhoc Advertisement

Is there a way to create a local advertisement on a machine to run a package/program? Purpose being for testing, or even adhoc deployment. Instead of creating a test advertisement and collection, ...
2
votes
1answer
457 views

Trying to detect by registry after installation through SCCM fails

this is simple, I push out a program, an exe file. And in order for SCCM to know the program has been installed afterwards, it needs to 'detect' the program, as its an exe file this means I need to ...
1
vote
1answer
845 views

SCCM 2012 Application Deployment Keeps Failing

I am trying to deploy the SCCM 2012 R2 Management Console to my virtual test systems and the damn thing keeps failing and I cannot put my finger on it. I need some help here. I put the same question ...
0
votes
0answers
75 views

SCCM 2012 R2 install: error with samba4 domain

Am attempting to install SCCM 2012 R2 onto a member server in a domain with a Samba4 DC. I have every reason to believe that AD is working: smbclient reports (what I believe) are the appropriate ...
8
votes
0answers
341 views

How can I find which client(s) is causing my distribution update to fail?

It happens from time to time. I update a package and need to update the distribution point. We have multiple DPs, and usually everything goes through fine, however every once in a while, our main DP ...
1
vote
1answer
443 views

SCCM Task Sequence Error 0x8007000E

Booted up a VM into the SCCM OSD WinPE, entered password, and selected a task sequence. Before any packages were downloaded, I was hit with error 8007000E. The smsts.log file reports this error, and ...
0
votes
1answer
1k views

SCCM 2012 R2 - OSD Task Sequence failure on physical computers

I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try ...
0
votes
0answers
147 views

SCCM 2012 Primary Site Install Failure

We are running Configuration Manager 2012 SP1 with 1 CAS server, 2 Primary's, and a SQL server. I was tasked with bringing up a 3rd Primary site and I have run into some issues. I created the DB on ...
1
vote
1answer
373 views

SCCM 2012 Clients no longer detecting

Here is the scenario I had a fully functioning SCCM 2012 site server with the DP, MP, SUP, Application catalog, etc. roles configured and working. There is only one server on this site. Everything ...
2
votes
1answer
1k views

SCCM migration error: “Failed to insert OSD binaries into the WIM file”

When trying to migrate an OS deployment task from SCCM 2007 to SCCM 2012 R2, I receive the error "Failed to insert OSD binaries into the WIM file" during the step that copies the boot image. I have ...
3
votes
2answers
1k views

SCCM - Where to put the create user step

I've implemented SCCM on our server and am now running task sequences to migrate from Windows XP to Win7. But we also need to be able to add a new local admin, because disable the default ...
2
votes
1answer
246 views

SCCM 2012 R2 - How to specify custom SCCM server IP / name using MDT in PE

I am attempting to automate OS installations using SCCM 2012 R2 (MDT). Clients are failing when the PE attempts to contact the SCCM server as the address is being specified as server.example.com ...
2
votes
4answers
287 views

SCCM - does captured image HW = deployed?

Im hoping to use SCCM 2012 R2 to image a slew of machines that will be ordered over the next year. There will be several different vendors which implies different NICs, graphics, RAM, etc. My ...
1
vote
1answer
142 views

SCCM 2012 Client Auto-remediation breaks client

Our environment is running SCCM 2012 SP1 CU2. Our workstation base is 99% Windows 7, most of which are 64 bit. This post (link) shows details similar to what is going on. Basically, something goes ...
0
votes
1answer
932 views

SCCM - not a valid .wim file?

Am attempting to start using SCCM 2012 to image and maintain new machines. Have unpacked a win7 x64 .iso file to a network share and am trying to add it to SCCM via the Software Library/Operating ...
1
vote
0answers
4k views

SCCM 2012 R2 - unknown PC boot over PXE - bcd file error

When I want to boot an unknown PC over PXE an error comes after it starts the boot\x64\pxeboot.n12 file. The error looks like a Windows 8 bluescreen and contains: Recovery Your PC needs to be ...
0
votes
0answers
103 views

SCCM 2012 - Changes Image index, then we can't change it back

Adding a new boot-image to SCCM 2012. Confirmation dialogue at the end of the addition shows Image index of '1' (which we want)- yet when we went to edit the properties > data sources tab > to check ...
4
votes
1answer
209 views

SCCM 2012 and WSUS…missing Schema folder

A few months ago I installed SCCM 2012 R2 on a brand new 2012 R2 box. Everything went smoothly...or so it seems. I attempted to install WSUS to make it work with SCCM. A few hours of struggling later, ...
2
votes
1answer
157 views

What SCCM roles should I install on my secondary sites?

In the company I'm currently working, we'd like to install System Center Configuration Manager to automaticly deploy Windows 7 images and software. I have been conducting some research on installing, ...
1
vote
1answer
32 views

two identical machines act differently during OSD

I use System Configuration Manager 2012, SP1 to PXE -> Windows PE -> OSD Several computers I got a Lenovo T520 in the door yesterday and wanted to OSD it but in the task sequence step, I couldn't ...
0
votes
0answers
88 views

SCCM DB - Client assignment with DPs

I am trying to imitate SCCM 2012's behaviour when assigning a client to a distribution point for package downloads. Please tell me if I understood it correctly or if there are any errors in my ...
8
votes
1answer
370 views

How to accept EULAs for Software updates deployed through SCCM using Powershell

I'm trying to use the Start-CMSoftwareUpdateDeployment cmdlet to deploy a software update group to an existing collection. PS WHO:\> Start-CMSoftwareUpdateDeployment -SoftwareUpdateGroupName ...
2
votes
4answers
3k views

Troubleshooting Application Evaluations in SCCM2012

I am running into an interesting issue with some applications not evaluating properly in SCCM 2012. The example software I have is Adobe reader 11. When I install using an MSI deployment through ...
0
votes
1answer
364 views

SCCM 2012 software updates failing

Our SCCM setup stopped downloading updates 3 days ago. The error shown on the wsyncmgr.log is this: Sync failed: The subscription cannot be run at this time. Please wait a few minutes and try again. ...
4
votes
2answers
103 views

Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that ...
-2
votes
1answer
474 views

SCCM 2012: Can I deploy Config Manager Server as Hyper-V virtual machine? [closed]

I have planned to install SCCM 2012 on Windows server 2012 virtual machine. Let me know the system requirements of Visualization? This should be support up to 50 users. Thanks in advance.
2
votes
1answer
190 views

SCCM 2012 Client will not pick up site

I am working on migrating SCCM 2007 to 2012. I have the server setup, AD configured for the new server, and everything is working except for the clients. The 2012 client will not connect to my ...
0
votes
0answers
106 views

WSUS Configuration Fails on SCCM 2012 SP1 on Server 2012

I've installed SCCM 2012 SP1 on Server 2012. CU10 on SQL 2008 R2 SP2 and CU4 on SCCM. I go through the process of installing the WSUS role which appears to complete successfully but when I attempt ...
3
votes
0answers
521 views

System Center 2012 Alternatives [closed]

Are there any good alternatives to System Center 2012? I'm looking for a system platform that allows gives us a replacement for SCCM, SCOM, EdnPoitn Protection, DPM and Global Service Monitor and can ...
4
votes
1answer
346 views

Is there a way to script the installation of System Center Configuration Manager updates listed in Software Center?

We have a very tight outage window and for many of our systems, the servers must be rebooted in the correct order. Because of this, I would like to script our updates. I have attempted to use this ...
2
votes
1answer
2k views

SCCM 2012, Lenovo X240, won't PXE?

Hey guys so I've been very succesfully OSD'ing various computers the past half year. Using a Task Sequence for Windows 7 Enterprise that I created in SCCM 2012 Machines include: HP 8200, Lenovo T61, ...
3
votes
1answer
694 views

SCCM WMI Get Patches that require reboot

How can i get all patches that require a reboot before running the install process using WMI and SCCM. So far i have this wmi query that lists all the available patches but none of the properties ...
1
vote
0answers
847 views

SCCM Reboot at beginning of task sequence

For legacy purposes, we don't pxe boot directly from sccm but have a separate wds server that we pxe boot from, and upload sccm's boot wim (among others, again for legacy purposes) to that server. ...
4
votes
2answers
690 views

How would one run a task sequence within a task sequence in SCCM 2012 SP1

A Shining Example: Inside all of my task sequences I have a group that installs driver packages conditionally based on computer model: And of course, this list does nothing but grow. The fact that ...
0
votes
1answer
753 views

SCCM 2012 - How to deploy 'invisible' application?

Hi I haven't attempted dealing with dependencies before so maybe I'm doing it wrong I want to deploy an application, Dynamics AX 2009, to be visible and optional through software center This ...
1
vote
1answer
107 views

Active Directory Site/Domain Interactions

I'm having an issue wrapping my head around the myriad Active Directory components, and I'm hoping I can get some opinions or corrections from someone. At our workplace, we used to have individual ...
3
votes
1answer
803 views

Why do I get prompted for “Data Source Credentials” when editing a SSRS report for SCCM?

When attempting to add a dataset in Report Builder I am prompted to "Enter Data Source Credentials." Choosing "Use the current Windows user" fails, and I don't have the password for the specified ...
0
votes
1answer
580 views

sccm2012 client.msi error during OSD

I need some help understand my client.msi log to work out why my OSD is failing. Let me first tell you the scenario I have a Task Sequence in sccm 2012, it takes a standard win 7 enterprise image. ...