0
votes
1answer
8 views

User can access Windows based Apache sites but not linux Apache server over site-to-site VPN

I have a user (Win 7 Pro 64-bit) in a satellite office (10.1.0.0/24) that is trying to access web services in our main office (10.0.0.0/16) over a site-to-site VPN between a a Meraki MX60W and a ...
1
vote
1answer
25 views

VPN Tunnel set up Issues - Cisco WRVS 4400N to Server 2008 R2behind ASA5505

I was wondering if someone could help with a scenario i have that i am not sure how to set up regarding a VPN tunnel set up. I have a Cisco WRVS4400N business router , and on this device , i need to ...
0
votes
0answers
46 views

Azure VPN shows connecting but I can ping/rdp from local network

I set up a virtual network on Azure and connected it with Site to Site VPN to my local network. I am able to ping and RDP to the VM's in Azure from my local network. The problem is that the VPN ...
0
votes
0answers
25 views

Cisco 3800 - Crypto map gone wrong

I've noticed a very strange issue on our Cisco3800 router. The router is hosting multiple Site to site VPN connections. Everything was working fine for several months. No changes were made. All of a ...
0
votes
0answers
141 views

Site-to-Site VPN from Windows Azure to Cyberoam CR25iNG

I'm trying to configure Site-to-Site VPN between Windows Azure and on Premise network using Cyberoam CR25iNG UTM Firewall The Local Network Subnet is 192.168.0.1/20 (192.168.0.0 - 192.168.15.255) ...
0
votes
1answer
60 views

number of hops using tracert over vpn

I work for a small tech company that is signing up a new client that has two locations connected via a site to site VPN. If I run tracert from one pc to another pc at the remote office, there are no ...
0
votes
0answers
69 views

Site to Site to Site VPN

Just wondering if this is possible, we have a leased cisco 2911 (That I do not have access to) at that is set up with a site to site VPN to tie into a third party's Active Directory server. Our other ...
0
votes
1answer
396 views

AWS VPN Tunnel going down without traffic

I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time ...
0
votes
1answer
299 views

VPN Between Checkpoint R75.20 and AWS VPC

I have been trying for a long time now to configure a site-to-site VPN connection between Amazon and a Checkpoint R75.20 (previously i tried with Azure) unsuccessfully. I have tried everything and ...
1
vote
0answers
81 views

big speed difference on a network link with and without VPN tunnel

Scenario: We have a network link between two offices. The link is provided by a third party company through a VLAN on their network, but to us it is totally transparent -as if we had a simple ...
0
votes
1answer
59 views

VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

Firstly, is this possible? I haven't seen any posts that talk about this. The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual ...
0
votes
1answer
55 views

HP MSR20 Router VPN Questions

I have limited experience with routers, I was wondering if some offer some insight. I am considering deploying a series of HP MSR20 (or similar routers) at a number of satellite offices which have ...
0
votes
1answer
146 views

Set up persistent point-to-point VPN connection on Windows Server

I have seen this question, but it doesn't have a good response and what I am looking for is a little different. I have a well working environment (New York) with a Juniper router that allows me to ...
0
votes
1answer
86 views

Branch to Branch VPN through HQ router?

I've just upgraded our router and am working my way through setting it up as the old one was. The new router is a Draytek Vigor 3900. We have a number of sites with IPSec tunnels dialling in to our ...
0
votes
0answers
46 views

Cisco Firewalling traffic on Site-to-Site VPN

So with Cisco's, ASA 5505 at one end, 5510 at the other, a Site-to-Site VPN is configured. SiteA and SiteB. Now it get's complicated as their are VLANs both sides, several in fact, but this is working ...
0
votes
1answer
53 views

Site to Site VPN Tunnels

This is more of a theoritcal question then a problem. With regards to Site to Site VPN links, let's for the sake of the question say we have two Sonicwall Firewalls. Site A and Site B SonicwallA ...
-1
votes
1answer
91 views

Windows Server as router + VPN

We have two locations between which we want to have secure connection. The link between those two networks is 4Gbit/s, and the problem is that our firewalls can provide VPN with maximum throughput of ...
1
vote
1answer
180 views

Pinging between hosts through Layer2 tunnel fails

I have some serious problems with my newly setup network with a Layer 2 VPN tunnel. I draw a little diagram to show the simple version of the setup: The green lines are through the VPN, the blue ...
1
vote
1answer
89 views

puzzled by VPN, can not see machines in network

I have set up a VPN tunnel between office and rackspace, this all works and i can access my servers by there local IP. However i wish to remove ALL remote access away, so have created a VPN tunnel ...
1
vote
0answers
239 views

Site-to-Site VPN between Draytek Vigor and ISA 2006 Authentication Issue

I currently have a remote satellite office that has been configured as a site-to-site VPN. There is a Draytek Vigor 2830 router that is connected to an ISA 2006 server. I am having issues with ...
0
votes
1answer
118 views

EasyVPN vs Site to Site VPN bandwidth use

We have recently switched from site-to-site VPNs to EasyVPNs. At around the same time, we noticed increased bandwidth use. Does anyone know whether these two VPN methods use noticeably different ...
1
vote
0answers
86 views

CCP site-to-site VPN using access rules

I use CCP for creating site-to-site VPNs on a Cisco router. I need to use network objects on my ipsec rule for having multiple hosts but the network objects are only available on the access rules ...
2
votes
1answer
208 views

L2TP server - site-to-site vpn connection

I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we ...
1
vote
0answers
56 views

Advice on Auditing VPN Connections

I've inherited a network that is truly a mess and the VPN config is amazingly long with confusing group names and very little documentation. I am curious to see how others have gone about auditing ...
2
votes
2answers
1k views

VMWare ESXi - VPN Tunnel to VMs

We are looking at renting a VMWare ESXi server through a provider. This VMWare ESXi server will be allocated a public IP. Most of the VMs that we will host on this server is only meant to be used ...
0
votes
1answer
128 views

Unable to access Local computers in LAN2 of my Windows VPN

I have searched the site for a close situation, I didn't find one. We have two sites connected by VPN as follows: LAN1 (192.168.18.0) VPN Server - 192.168.18.4 LAN2 (192.168.19.0) VPN Server - ...
0
votes
1answer
76 views

Do sides of a VPN tunnel need IPs set (2 VPN routers connecting virtual LAN)?

Is there a reason to have IPs on terminating sides of a VPN tunnel when connecting, say, 2 remote offices? There is an option to have and an option not to have. Advantages and disadvantages of both ...
0
votes
2answers
1k views

Outside VPN traffic not able to ping site-to-site VPN remote site

we have two ASA 5510s one in 8.4(4) and one in 8.2(5) in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local (8.4(4)) Site/Subnet B: 192.200.0.0 - ...
0
votes
1answer
477 views

How can I create a permanent/persistent PPTP VPN from a Windows Server 2008 (R2) machine?

A while ago I managed to create a permanent (or persistent) VPN to a remote server from my Windows 2008 server. However I can't remember how I did this and I can't find any articles explaining how you ...
3
votes
1answer
19k views

IPsec VPN site-to-site: How should I configure the ipsec.conf files on both sites to get the tunnel up?

What I am trying to do is to create a site-to-site IPsec VPN between my network and my friend's network. We both have a router and two computers on each router, with all computers running Linux. So I ...
1
vote
1answer
790 views

VPN Encryption Domain

I'm trying to connect to a counterparty using VPN IPsec. I have a standard cable broadband connection with a single static IP address. The counterparty have asked me for my "Public IP Address Assigned ...
0
votes
1answer
227 views

share one vpn connection through windows rras with other clients

I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the ...
1
vote
0answers
583 views

Site-to-Site VPN: remote machines can't access local machines

In our office network we have a VPN setup to our datacenter. We are using a Sonicwall NAS. The VPN works fine for most cases. From our office we can connect to the servers in our DC but if I were to ...
2
votes
1answer
309 views

Is it possible to connect two IPSec site-to-site VPNs to one Windows 2008 Server?

I need to connect to two IPSEC site to site vpns from a Windows 2008 Server at the same time. Is it posible? I tried to assign two IP Security Policies, but it seems I can only have one assigned at ...
0
votes
3answers
621 views

How to test fail over VPN between ASAs without disabling the main connection?

I have a fail over VPN set up between two ASA in case the p2p connection drops. I'm trying to find a way to test this with out dropping the p2p. Any ideas on this? I can't generate any interesting ...
1
vote
3answers
587 views

Site to site VPN tracert

I'm not sure how in depth I need to go with this question, but currently I have a site-to-site VPN setup and we are having major connection issues between the two sites. I did a tracert and received ...
1
vote
1answer
159 views

Changing an IPSec pre-shared key without bringing down the tunnel (too long)

How do you advise changing an IPSec L2L VPN pre-shared key with respect to minimizing downtime? Is there any magic formula for this, or best practice, or do you just kind of try to change it on both ...
0
votes
1answer
324 views

how to NAT site to site VPN web traffic?

I have 2 Cisco routers and they are connected via GRE over IPsec. All of the traffic from the first router is being routed to the 2nd router with a default route. I need to access internet from the ...
2
votes
2answers
922 views

VPN IP Routing - slow connections

UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two ...
1
vote
1answer
4k views

Incorporating LogMeIn Hamachi into your own work network as dedicated VPN solution

I've been using LogMeIn Hamachi for a while for personal use and recently I started to wonder how to (and if at all) implement it as full blown VPN solution for my multiple clients. Those are ...
3
votes
1answer
485 views

Site to site VPN : how does the routing work?

I've established a site to site VPN with two Zyxell routers. Site A (LAN: 192.168.16.x) is the main office, and site B (LAN: 192.168.17.x) is a branch office. Both sites are able to reach each other, ...
0
votes
2answers
247 views

Setting up VPN for satellite locations

I'm looking to set up multiple VPNs to connect 6 different smaller locations all together. I mean to use a site to site VPN from each location to the main location. I'm using Sonicwall TZ210's at each ...
1
vote
4answers
281 views

Extent LAN over internet

I have the following scenario. A computer is connected to private network. I do NOT have access to modify anything on this private network. I am just supplied with a network cable. The computer ...
1
vote
0answers
361 views

OpenVPN tunnel routing issues

Please excuse my inexperience. I managed to setup a vpn connection between a single client and server. Currently I am testing this in VM's which are running Server 2008 R2 (temporary since I have ...
1
vote
2answers
390 views

Using IP phones over a VPN?

We have a few small sites that each have a Draytek Vigor (various models) which are configured to create a company VPN. It's setup as follows: Branch 1 (192.168.1.0/255.255.255.0) Accepts Incoming ...
0
votes
1answer
5k views

VPN from ASA5505-Checkpoint failing after one hour

I have an IPsec site-site VPN set up and working, however I'm having problems once the connection has been established for over an hour. After an hour ASDM still thinks the VPN is connected and the ...
0
votes
1answer
3k views

Cisco RV042 VPN with Dynamic IPs - Remote Gateway Not Resolving

I have an existing network setup that I inherited from my predecessor. Currently there are two sites, each with a Linksys RV042 VPN router running the 1.3.12.19-tm firmware. They are currently set up ...
0
votes
1answer
1k views

Problems directing traffic over our site-to-site VPN

We have two offices connected via Gateway-Gateway VPN DC1[192.168.0.101]---RV082(A)[192.168.0.1]---[VPN]---RV082(B)[192.168.3.1]---pfSense[192.168.3.100]---DC2[192.168.1.2] DC2 is able to connect ...
3
votes
1answer
1k views

site-to-site VPN between cisco ASA and 870 cannot ping remote network

I have two sites which are connected through site-to-site vpn from cisco. One site has a cisco ASA router, the other has a cisco 870 router The tunnel has been setup, and active, however I cannot ...
1
vote
1answer
375 views

Site-To-Site VPN for internal traffic only

I'd like to connect my home network with my office network. At my office (host) I have a Cisco ASA 5510 ready to go. At my home network I'd like only work traffic to flow through the tunnel (meaning ...