SuSE Linux Enterprise Server is the "professional" SuSE distribution. To get support and patches from the manufacturer (now Attachmate, previously Novell) you have to purchase a license.

learn more… | top users | synonyms (1)

0
votes
1answer
2k views

Enabled Apache mod_status but server-status was not found on SUSE enterprise 11 SP1

In /etc/apache2/httpd.conf, I have remove the line of Include mod_status and add the following to the last line, LoadModule status_module /usr/lib/apache2/mod_status.so ExtendedStatus On ...
1
vote
3answers
3k views

ext3/ext4 physical block size view

I'm using a suse 11 server with xfs and using "xfs_info /srv" command i seen this. xfs_info /srv/ meta-data=/dev/mapper/vg01-srvvol isize=256 agcount=38, agsize=1964032 blks = ...
0
votes
1answer
2k views

Apache2 will not start on OpenSUSE after enabling mod_pagespeed

I have a linode VPS, running openSUSE 12.1 (A little outdated, but stable). I have installed the RPMS for mod_pagespeed. mod_pagespeed.conf has "ModPagespeed on". Restarting apache fails after ...
1
vote
1answer
72 views

Curl returning error 52 or 56 with REST API call spanning more than 5 minutes

So I have been trying to figure this one out for about a week now. Here is the run down: I use CURL in PHP to pull data from an API. As the response to the API call gets bigger (pulling over 15k ...
2
votes
1answer
19 views

sles/opensuse os installation log

Is it possible to keep installation log off all events, tasks, say running commands, etc.. while installing SLES/openSUSE (or maybe another linux)? It's not a problem lookup info in already running ...
0
votes
1answer
2k views

install nginx on suse linux enterprise 11

I need some help getting ngnix installed on Suse Linux Enterprise 11. This is my first time trying to do this so I am likely missing something basic. Thus far I have: wget ...
0
votes
1answer
20 views

how to “reset” the whole /etc/apache2/ to factory defaults in SLES 11?

i got a SLES 11 sp3 Server where the whole /etc/apache2 seems to be messed up. If like to reset the whole thing to what i call "SuSE's factory defaults" so i can start over. Any quick tip ?
0
votes
0answers
22 views

IP forwarding issue in SLES12

I'm triying to configure iptables in SLES12 in order to route packages between two machines. This is the scenario. I want to connect from A to C using iptables and ip forwarding on machine B ...
0
votes
1answer
115 views

Copy LVM volume group spanning two physical volumes on two disks

[update] i have copied the two primary partitions using gparted. now i am stuck trying to copy a single volume because it is made of two physical volumes each on separate disk...ideas? /sda5, /sdb1 = ...
1
vote
0answers
82 views

SLES 12 High Availability Cluster - scsi persistant reservation fencing

I'm trialling SLES 12 w/ HAE to run a Fileserver cluster consisting of two nodes. Idea was to use SCSI persistant reservation as a fencing method using the fence_scsi script from stonith fence agents. ...
1
vote
0answers
56 views

Can't get VirtualHosts to inherit global settings from default-server.conf in Apache 2.4 on SLES 12

I am using Apache 2.4.10 on SLES 12. According to the the SLES 12 Administration Guide the default-server.conf file is "Global configuration for all virtual hosts with reasonable defaults. Instead of ...
1
vote
2answers
5k views

install openSuse packges on SLES?

I wish to install a package called 'mosh' onto Suse (not openSuse). The instructions for mosh are to run a simple sudo zypper in mosh. This sadly results in this on suse: 'mosh' not found in package ...
0
votes
2answers
29 views

Multiple Servers, Multiple ssh Keys, Unique ssh keys for Infrastructure servers

Ok so I've done a bit of googling and haven't come across an answer. We have multiple servers in our environment and around 5 infrastructure servers. Then we have one server that we can ssh to all ...
1
vote
0answers
32 views

libvirt hook qemu suse12

we have this qemu hook. In suse 11 was working well but in suse 12 it is not working. The hook is setting the ports in openvswitch native-untagged. Do you know if there is some libvirt missing ...
2
votes
1answer
566 views

Installing a package (e.g. git) without internet access on SLES

I am trying to install git on a SUSE linux server that, to all intents and purposes, doesn't have internet access. It would appear that I also need to install some dependencies for git. Is there ...
1
vote
2answers
102 views

How to download Redhat Enterprise Linux and SuSe Linux Enterprice mirrors to Ubuntu? [closed]

To download Ubuntu repository I can use debmirror, rsync, apt-mirror and so on. But how to download and sync Redhat Enterprise Linux and SuSe Linux Enterprice repositories to make local mirror?
0
votes
1answer
50 views

logrotate advanced date in daily rotations

I have set a logrotate config file like this: /var/log/tomcat/catalina.out{ copytruncate daily dateext rotate 10 missingok notifempty } And in my /sysconfig/cron settings file I have set ...
-1
votes
2answers
191 views

iptables rule to send email

I have to send emails (and only send, not receive) from a linux server (SUSE Linux Enterprise Server 11) and I think I should add kind of the following rule to the iptables: iptables -A OUTPUT -p ...
0
votes
0answers
63 views

Data recovery seems impossible after kernel upgrade. MDADM (Raid1) LVM2

I opened a question about rebuilding a bad partition My Problem that din't take me anywhere. Bad news is the company trying to rescue the data says it's finding huge inconsistencies they can see some ...
0
votes
1answer
403 views

linux suse 10 apache related

My application is using apache and the server is integrated with siteminder. I am using suse 10, when I run cat command I am getting the following error: cat: symbol lookup error: ...
1
vote
1answer
617 views

Puppet 3.3.1 Certificate verify failed

I`ve trouble to setup a master/node scenario with puppet 3.3.1 (puppet opensource) on both master and slaves. The slaves are on a windows and SLES machine. The Master is also on a SLES machine. The ...
2
votes
0answers
157 views

Reset root shell back to /bin/bash in suse 11

In my production server which is running SUse 11 SP1, the root shell is set to /bin/eksh. Not sure how come it is set to this..we are using /bin/bash as root's default shell. I tried to reset it like ...
0
votes
0answers
24 views

use ext3 with inode size 128 and acl

i saw this in one of the docs that i had read Inode size: The default inode size is 256 bytes. Specify a value in bytes that is a power of 2 and equal to 128 or larger in bytes and up to the block ...
1
vote
1answer
168 views

Puppet for Patch Management

I am thinking of using Puppet for massive patch management. The way to go with this, based on some research, is to create a class and apply it wherever you need, like in the following case: class ...
2
votes
2answers
444 views

Can I configure resolv.conf to use a specific nameserver for a domain?

Can I configure resolv.conf to use a specific nameserver for a domain? e.g.: nameserver internal.thekelleys.org.uk 192.168.1.1 nameserver 192.168.0.1 I don't want to list *.test.com in /etc/hosts; ...
3
votes
2answers
10k views

LVM: “Couldn't find device with uuid” yet blkid finds the UUID

I have a SLES 11.2 PPC (3.0.58-0.6.6-ppc64) system that lost track of its volume group (containing LVs with data that is not critical but would be rather nice to get back). The disks are connected ...
1
vote
2answers
588 views

Zypper error while loading shared libraries

I'm doing some work on a Suse enterprise server and I lost connection durring a system update. Now I can no longer use zypper and get the following error: zypper: error while loading shared ...
1
vote
4answers
4k views

How to install VNC server on Linux SUSE EC2 instance?

Assuming I can ssh to my Linux instance (SUSE Linux Enterprise Server 11 SP1) as root and that I can transfer files into it - how do I install a VNC server (let's say RealVNC free version) on the ...
0
votes
0answers
501 views

How to enable Forward Secrecy with mod_nss in apache2?

I use apache2 on a SLES box and have configured SSL via mod_nss (because the standard mod_ssl is not able to provide TLS 1.1/1.2 due an old and not up-gradable openssl <1.0 package in SLES). How ...
0
votes
1answer
81 views

How to close specific port with SuSEfirewall2?

I'm opening specific ports in a SuSE 11 server to do ssh forwarding. After I finish, how do I close only the ports that I opened? I tried SuSEfirewall2 close EXT TCP 4050 but it seems to close ...
1
vote
1answer
2k views

need to configure BIND server query logging with versions

I've been trying to get BIND server query logging working, creating 3 versions, max 100mb each. The system is SUSE SLES 11. I have found numerous how to articles on the web but none of them do ...
1
vote
1answer
454 views

Install OpenSuse 13/Linux on Intel raid ESRT2 fails. SLES works

I have an Intel box with S2600GZ board. I have tried to install a few Linux distros and non can detect the ESRT2 raid. All distros claim "No disks found". My goal is to install OpenSuse 13. The only ...
4
votes
1answer
230 views

SLES 10 SP4 (x86_64) - HP Proliant DL380 G4 - Becomes unresponsive randomly

Had the misfortune of upgrading a HP Proliant DL380 G4 from SLES 10 SP2 (i586) to SLES 10 SP4 (x86_64). Although the installation completed smoothly, the server became unresponsive after a couple of ...
2
votes
3answers
525 views

Why wget doesn't read HTTP_PROXY in uppercase format?

I know in unix/linux the enviroment variables are uppercase, like LD_LIBRARY_PATH ; HOME ; $USER and so on. Today playing with wget I saw this commands just uses lowercase enviroment variables: env | ...
-2
votes
1answer
292 views

I've uninstalled/deleted bash and it's killed the server

I changed the default shell to zsh. And then proceeded to uninstall bash (this was via yast on SLES). To my horror I start to see everything deleted/uninstalled, apache, mysql . I can't putty into ...
1
vote
1answer
1k views

Apache2 with SSL and mod_jk on SUSE Linux Enterprise | Apache always starts SSL disabled

I have installed Apache2 (with mod_ssl enabled) on SUSE Linux Enterprise Server 11 (x86_64) (patchlevel 1), using YaST. Once installed, I tested whether everything works fine so far. SSL also worked ...
1
vote
2answers
3k views

PXE DHCP configuration with existing DHCP server

How does a DHCP service need to be configured, so that it handles PXE requests while there is still another DHCP server on the network? I managed to set up a working PXE system in a separate ...
1
vote
1answer
194 views

Suse 11 Sp2 pam-config doesn't work

I try to add pam_ldap module in Suse 11 Sp1 Server 64 bit using: pam-config -a --ldap OS information: node01:~ # file $(which pam-config) /usr/sbin/pam-config: ELF 64-bit LSB executable, ...
1
vote
1answer
846 views

unable to install postgresql on SLES 10

i am trying to install postgresql-server on a Suse 10 (SLES10 SP2) 64 bit machine with no luck. I followed the link on the postgres website to the place where they maintain the build for SUSE: ...
0
votes
1answer
2k views

EC2 instance initializing with only 1/2 check thus not able to login into my Linux server

Hello friends, Our EC2 instance is initializing with only " 1/2 checks passed " after I detached and reattached my volumes (I did it for some specific debugging purpose). Thus i am not able to login ...
4
votes
3answers
3k views

Replacing a Hard Disk with a clone fails

I just cloned a disk (A) using dd into the same kind of disk (B): dd if=/dev/sda of=/dev/sdb Now, I want to boot the server with new disk (B) instead of old (A). But i getting an error during ...
2
votes
1answer
363 views

Xen Dom0 could not find boot device (or any disk)

I have a brand new DELL server running SLES11 SP1 where I am trying to install my very first Xen Hypervisor. So I installed "Hypervisor and Tools" via YaST (excluding graphical elements), which ...
0
votes
2answers
2k views

Upgrading from SLES 10 SP2 to SLES 11 SP2

I am running Suse Linux Enterprise Server 10 SP2 and I need to upgrade to SLES 11 SP2. Can I just write a script which will install all the RPM's present in SLES 11 SP2 on my SLES 10 SP2 system. ...
-1
votes
1answer
131 views

Ubuntu 12.04 with Subversion Edge and SLES 11 with Subversion Edge

I have a server (SLES 11) witch Subversion Edge. On this svn, i have repository and users. I have to migrate this svn on a Ubuntu server 12.04. I have installed Subversion Edge on this server. Now I ...
0
votes
4answers
3k views

What are the ways to build a failover cluster?

I have a task where I need to build a failover cluster in two cases: first with servers on Red Hat Enterprise 5.1 and second with SUSE Linux Enterprise 11 SP1. Both cases have SAN. I know there are ...
0
votes
2answers
138 views

Oracle database installation file limits

I'm reading a oracle guide for installing a Database on redhat 6, but i don't understand why oracle recommend to set the file-max system parameter and nofile in /etc/sysctl.conf ...
4
votes
2answers
1k views

Time-based 32-bit overflow in Java? Or SLES11?

This is Tomcat 6.0.18, Java 1.7.0_03 (32-bit), and SLES11 SP2 (64-bit). As for kernel information: $ uname -a Linux server-1 3.0.13-0.27-default #1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b) x86_64 ...
4
votes
1answer
354 views

What's SUSE linux? Why does it cost more on Amazon EC2?

What's the difference between EC2's "linux/unix" server, and "SUSE Linux" ? Why does SUSE cost more? Is it better?
-1
votes
1answer
55 views

Apache2 vhosts won't work [closed]

i'm trying to setup correctly a vhost under apache2. I'm running Suse 11.3. What i'm trying is: Add row to /etc/hosts 127.0.0.1 my.vhost.domain Create file.conf under vhosts.d <VirtualHost ...
1
vote
1answer
198 views

Recover a not responding ssh server [closed]

a machine with a postgres database (which is reponding fine) has a ssh service an nagios nrpe service. Responds to ping. Postgres is performing as expected. (apache connects from another host) ...