Self-Monitoring, Analysis and Reporting Technology
0
votes
1answer
57 views
Why can't i recover a RAID1 disk which apparently has no errors
For several years now we run a software RAID1 on a old Gentoo box with a custom Linux 2.6.31. The RAID consists of 2 harddisk with 4 partitions each. In the last years it happend about 3-4 times that ...
0
votes
1answer
126 views
Simulate a SMART error on a drive for test purposes?
We are monitoring the disks on our servers using Smartmontools and Nagios with the check_smartmon or another Nagios plugin. It appears to work, as there are no errors. But how do I know if it is truly ...
0
votes
1answer
101 views
smartctl reports Current Pending Sectors as 2, but a long test doesn't find any errors
The SMART attributes on the drive are:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH ...
0
votes
1answer
76 views
Munin's smart plugin keeps reporting an error in the past because of the exit code
My hosting provider has inserted a hard drive into my server which seems to have had some sort of error in the past but a full offline smart check showed that everything is (about) ok at the moment. ...
0
votes
1answer
233 views
Possible to reset SMART logs?
I got two 2TB seagate disks that show SMART error on bootup. I ran the seagate disk utility check and it passed the full test. But the SMART error says both drive have exceeded 70C in temperature so ...
0
votes
1answer
97 views
SMART with Megaraid under windows
Is there a way to read RAW HDD SMART value that is behind a MegaRaid raid?
apparently that is possible with smartmontools under linux, is there something similar possible with windows?
Thanks.
0
votes
1answer
225 views
Monitor SMART Values of a SAS/SCSI drive with Munin
I'm trying to monitor my two SAS drives using the SMART Tools Plugin for MUNIN.
On SATA drives its no problem, all SMART values are being shown.
It seems that smartctl doesn't output valuable SMART ...
0
votes
1answer
553 views
Hp server multiple raid controller question
We just got a brand new HP DL370 G6 server with 14 X 146 gb and 2 X 300 gb sas drives.
Inside we got 3 raid controllers (one HP DL370, one HP P410 and one HP P812).
It has 2 disk bays and each of them ...
0
votes
0answers
345 views
Centos 5.5 - Smartctl/hdparm strange behavior with both HDDs
I found out one of our servers was down today due to a HDD failure. The only thing I could see on console the was:
scsi 0:0:0:0: rejecting I/O to dead device.
This server has 2 HDDs with a software ...
