2
votes
1answer
98 views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
2
votes
3answers
323 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
2
votes
1answer
37 views

HP Smart Array P410 Stuck in Ready for Recovery 00.0%

We are using smart array disk controller P410 by HP on our supermicro server. Sadly of the HDDs in a RAID10 Array was damaged and we were forced to change that specific hard disk. After 3 days and ...
-2
votes
1answer
38 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
4
votes
1answer
29 views

HP DL180 G6 amber light but drive is OK

We have an HP DL180 G6 with 25 SFF SATA drives, running 64-bit Debian Linux. A drive recently failed, so we replaced the failed drive with a new, identical part from HP. The disk controller rebuilt ...
1
vote
1answer
38 views

HP ML350 Gen8: error erasing disk cciss/c0d0 on PXE

I Have a ML350 Gen8, that on first PXE Boot, will ask me whether I am sure I want to erase raid controller cciss/c0d0 giving me an option of Yes | No. This only happens when the disks are brand new ...
0
votes
1answer
85 views

Repair HP SmartArray p410i

i have a hp proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that ONE of THREE ...
1
vote
1answer
52 views

Upgrade the firmware of SAS HDD on DL380 G5?

I have a DL380 G5 server with 146GB single-port HDD (DG146ABAB). The HP Storage Array P400 controller is saying that firmware should be upgraded on these drives. I am running VMware ESX 5.1 (no ...
2
votes
1answer
43 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
0
votes
2answers
72 views

RAID Configuration & File System - What to RAID 1 and what to RAID 0 [closed]

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the ...
1
vote
2answers
100 views

HP Server with P420i - Migrate to RAID 5 Error

I have an HP DL360 G8 with a Smart Array P420i with 3 physical drives, currently setup RAID 0, I would like to migrate to RAID 5. When using the Smart Storage GUI when I attempt to migrate the ...
0
votes
1answer
70 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
2
votes
2answers
145 views

Combining SSD and HDD in HP dl380p?

I´m planning to buy a dl380p with 25 sff slots with 2 ssd:s raid 1 and 10 hdd:s raid 5, having room for 13 more hdd:s in the future. Is this possible or do I need two raid cards?
2
votes
1answer
347 views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
3
votes
1answer
30 views

Raid 5 on two scsi buses with different maximum speeds

I'm quite a noob, I'm trying to set up as a study machine an old HP ProLiant DL385 G1. I've configured a RAID 5 out of six SCSI 3.5" HDDs using: - Smart Array 6i controller; - (4 x SCSI Ultra320 ...
1
vote
1answer
86 views

How to change the size for HP smart array without losing data

For a HA clustered setup (RHEL 5.8), my HP DL 380p G8 server consists of this: mirrored root disk(RAID 1): array A physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS, 300 GB, OK) physicaldrive 1I:2:2 ...
3
votes
1answer
62 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
0answers
264 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
0
votes
1answer
287 views

How to check HP Smart array status on ESXi 5

I've been reading How to run the HP Online ACU CLI for Linux in ESXi 4.x & trying to figure out a way to see the RAID status of the server without having to restart it. This is because, I've ...
0
votes
1answer
45 views

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point ...
1
vote
1answer
178 views

HP DL380 G7 using P410 controller with a SAS Expander card

A sever is fitted with a HP SAS Expander card and 10x disks (2x mirrored Arrays). The server is not detecting any logical volumes or physical disks. So is it ok to bypass the expander card and ...
1
vote
1answer
392 views

HP SSD on ProLiant DL360p Gen8 p420i controller - no TRIM?

We have a HP Proliant Dl360 Gen8 server with the 420i 2Gg disk controller. (646905-421) we have a couple of the HP Gen8 200GB 6G SAS SLC SSDs (653078-B21), (they run in RAID1) We run Debian6 on this ...
3
votes
2answers
387 views

How can I monitor HP P410 hardware RAID degraded in Freenas

I would like to run freenas on a HP P410 hardware RAID 5 4x600GB 15k SAS array and be alerted in the case of physical disk failure, however the freenas documentation says: to prevent problems, do ...
3
votes
4answers
864 views

HP Proliant DL180 G6 - Smart Array P410, bay 11 error

I've been trying to search over ther internet for a solution to fix this. I'm the new IT person for my organization and our previous IT have not kept any records on certain things. I do understand, ...
1
vote
2answers
310 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
1
vote
1answer
304 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
3
votes
1answer
1k views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
1
vote
1answer
297 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
3
votes
2answers
128 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
1
vote
1answer
1k views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
0
votes
1answer
200 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
3
votes
1answer
105 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
6
votes
2answers
833 views

Why are “sectors per track” still relevant on a modern OS with modern drives?

I am building out a new machine and the raid controller is asking me for sectors per track. I haven't had to deal with disk math in a long time (1998?), and I can't find anything that pertains to ...
2
votes
1answer
1k views

HP Dynamic Smart Array B120i ESXi performance issue

One of our small offices was in need of a small server to perform certain tasks. Because the noise and size an of a regular server i went with the HP ProLiant Microserver Gen8 G1610T. Witch i expected ...
0
votes
1answer
273 views

Replacing a HP P410 RAID Card

I'm getting kernel panics and I'm suspecting it's the RAID card locking itself up based on the messages in the panic log. I'm not sure if it's really the card or not. When it boots back up, it says ...
9
votes
2answers
492 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
1answer
68 views

Raid 1+0 on HP ML350 G5

I'm trying to setup a Proliant ML350 that has a SmartArray E200i Raid controller. I want to setup RAID 1 but there isn't any option for it, just 0, 1+0, and 5. I only want to use 2 drives since I just ...
3
votes
2answers
906 views

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been ...
1
vote
2answers
1k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
5
votes
1answer
533 views

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ...
3
votes
1answer
58 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
1
vote
2answers
141 views

What “PAL Shim AllocRequest returning NULL” meens?

On a HP DL380e Gen8 with Dynamics Smart Array and SAS RAID installed I try to install Centos, after load the RAID Driver from HP Support Site I can access the RAID and do the installation. The ...
3
votes
1answer
237 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
2
votes
4answers
413 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
2
votes
2answers
270 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
8
votes
2answers
2k views

SSD (Intel 530) read/write speed very slow with RAID 10

Explanation: We have a Server: Model: HP ProLiant DL160 G6 4 x 240GB SSD (RAID-10) 72GB DDR3 RAM 2 x L5639 HP P410 RAID Controller (256MB, V6.40, Rom version: 8.40.41.00) SSD drives are 4 brand ...
1
vote
1answer
410 views

Add two disks to existing mirrored logical drive using hpacucli

I have an ESX-server with an existing disk array which consists of 6 disks that are mirrored: Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 ...
1
vote
1answer
726 views

HP ProLiant DL380 G6 server error code: 347 of array controller

I have got a brand new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 146 GB SAS drives and wanted to change them with 300 GB SAS drives before installation. Now, we ...
1
vote
3answers
412 views

How to identify faulty drive on a HP DL160 G6 - P410 Smart Array

I have a HP DL160 G6 Server with 4 HP SAS drive, firmware have been updated to the latest on the HD and the Smart Array... The issue im having is that one of the disk have a steady amber light turned ...
1
vote
2answers
412 views

How to move RAID 1 to RAID 1+0

I have two HP disks in RAID 1 (300 Gb), and would like to at 2 additional disks in RAID 1+0 having in total of 600 Gb on C:. I would like to know is it possible to do it using Array Configuration ...