"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.

learn more… | top users | synonyms

2
votes
2answers
1k views

HP DL380 G7 Disk swap to a HP DL380 G6

The HP DL380 G7 has 3 SAS disks in RAID 5 configuration. I need to change that server to another task and instead of make a clean install on the HP DL380 G6 can i just swap the 3 disks from HP DL380 ...
-1
votes
2answers
195 views

Smart Array 6i in DL385 can only see two physical drives

I originally had 2 x 72.8 GB hard drives installed and set up as RAID 0+1 then I added another 4 x 72.8 GB hard drives and it can still only see 2. That applies with both the inbuilt configuration (F8 ...
3
votes
3answers
6k views

What are the good ways to migrate a RAID array to bigger disks?

I'm looking to replace my hard-drives with bigger-ones and I would like to know what are the best practices in doing this. I have a HP ProLiant with its 256MB version of RAID controller: 03:00.0 RAID ...
3
votes
2answers
4k views

Proliant DL360 Raid5 Hot Swap Drive

I have a DL360 G5 running WinSrvr2003 with a 3 drive (72GB) SAS Raid 5 array on P400i controller. The single array has two partitions. (OS and a data store) Drive 2 has failed and is off line (Amber ...
6
votes
2answers
9k views

VMWare ESXi 5 - Expanded RAID 5 array - cannot access datastore

I'm using VMWare ESXi 5 and had a 2 TB RAID 5 setup on an HP DL360 with a P400i RAID card. I added two more 1 TB drives and using the SmartStart ACU, added the drives and expanded the logical disk. ...
1
vote
2answers
4k views

HP StorageWorks MSA60 SAS attached enclosure: how to manage online on Windows?

We have a HP StorageWorks MSA60 SAS attached enclosure, with 12x1Tb SATA disks, connected to a P800 controller. Until now, they were used with a Linux server under the control of an external company. ...
0
votes
1answer
514 views

Cabling order on ProLiant DL180 G5 with SmartArray P800 and 3 x MSA 60 enclosures

For some reason I need to power up a system full of data without having any documentation about cabling. I have : 1x Proliant DL 180 G5 with P800 3x full loaded smart array 60 with probably 2 ...
4
votes
2answers
1k views

SAS enclosure doesn't restart - MSA60

I just inherited a HP StorageWorks MSA60 (this is a direct-attach SAS enclosure). I had to move it to another shelf so I turned off the computer which was using it. I also pulled the 2 power cords off ...
1
vote
3answers
4k views

HP ProLiant ML350 G6 Server

I have a HP ProLiant ML350 G6 Server. I installed windows server 2008 standard edition. There are 60 clients connected to this server. The server only detects one HDD and I have 2 146gb HDDs. I read ...
2
votes
2answers
2k views

HP Proliant DL120 G7 with P212/256MB SmartArray Controller GPT Support

I have the HP Proliant DL120 G7 server with P212/256MB SmartArray Controller configured with 4 - 2TB drives as RAID 1+0 (4TB usable space). I would like to have a small partition for my Linux OS and ...
2
votes
2answers
1k views

How to access to install/check software on a ESXi 5 to view system hardware

I have the following: 2 x DL585 G1 (8 cores) with built in Smart Array 5i (4 x 74GB SCSI in Raid 5) I installed VMware ESXi 5 and got it all working :) When I boot my server up, it states the ...
1
vote
3answers
1k views

HP DL585 G1 with VMware ESXi 5 - SATA solution, need more storage

I have the following: 2 x DL585 G1 (8 cores) with built in Smart Array 5i (2 x 74GB SCSI in Raid 0) I installed VMware ESXi 5 and got it all working :) However I need more space. I was thinking ...
0
votes
1answer
218 views

How to track physical drives to server LUNs & mount points

I need to document which physical drives each server depends on ( SAN, on an external array, iSCSI etc). Since this potentially a many-many relationship, with dependencies, finding a usable solution ...
2
votes
3answers
5k views

HP DL370 G5 hpacucli shows 2 drives as Predictive Failure - safe to try a rebuild 1 by 1?

I have: Openfiler SAN ML370 G5 Smart Array 6400 slot 1 Array B Logical Drive 2 is a RAID5 array of 6 x 148GB 10k hot plug drives making 680GB no spare Last Friday, the power went out, this machine ...
5
votes
2answers
32k views

HP SmartArray P400: How to repair failed logical drive?

I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I ...
1
vote
1answer
279 views

Connecting 8 x 500GB SATA drives to HP Smart Array P800 controller on 2 external mini ports

I have already 8 drives hooked up the the P800 RAID controller internally. I would like to attach 8 more SATA drives externally. I looked in the documentation but the only thing mentioned for the ...
1
vote
2answers
425 views

Is HP p212 raid controller supported on Ubuntu 8.04 server LTS?

sorry for my simple question, however I can't find any useful resources on the internet. Except the official HP page about my p212 here. From this I understand that HP doesn't support Ubuntu 8.04. But ...
0
votes
3answers
2k views

HP B110i controller not seeing storage array. Any ideas?

We got a new HP ProLiant DL160G6 with internal P410 SAS controller, and an additional B110i SAS controller with external ports that is supposed to connect to the HP Storageworks D2600 Drive Array we ...
2
votes
2answers
496 views

vSphere 4.0 - Hardware system Monitoring

I have an ML350 G6 with ESXi 4.1 Free (vSphere Hypervisor 4.1 Free version) installed. Since ESXi is a bare-metal hypervisor install I was not able to install the HP Proliant Support Tools for ...
3
votes
2answers
6k views

Predictive failure on hot swappable drive

on a HP PROLIANT ML350 G5 server, one of 3 physical hot swappable drives in a Smart Array has a status of Predictive Failure and the amber light is flashing. Each drive is 146GB. In HP System ...
1
vote
2answers
6k views

HP ProLiant ML350 G6: Does the RAID rebuild automatically?

One of sas hd of this ML350 died... We're buying a new one and I wanted to ask if I can just take out the faulty one and insert the new one with the server on to let it rebuild the raid or I'm forced ...
3
votes
3answers
1k views

Large disk queue length

A few days ago disk on my server started to have large queue length: I've changed controller battary recently, HP configuration utility was saying the battery is bad, but after changing the battery ...
6
votes
5answers
14k views

How do I get my HP servers to email me when a drive fails?

Ideally, with as simple of install as possible and without requiring rebooting the servers. Mostly for DL380 G5's if it helps. Thanks.
2
votes
2answers
991 views

Using the spare drive in an HP Proliant DL380 G4

I have an HP Proliant DL380 G4 with a Smart Array 6i controller and 6 hard drives. 5 of the drives are configured as a RAID 5 array, and 1 is designated as a hot spare. The server has just given me a ...
7
votes
3answers
21k views

HP ACU CLI Examples

Has anyone used the HP Array Configuration Utility Command Line Interface (hpacucli.exe) to get physical disk information into a file? I'm not at the machine right now, but basically I want to find ...
4
votes
3answers
8k views

Slow parity initialization of RAID-5 array on HP Smart Array P411 controller

On 29th October 2011, I built a RAID-5 array using 4 x 146.8GB Seagate SAS ST3146855SS drives running at 15k connected to a PowerEdge R515 with HP Smart Array P411 controller running Windows 2008 (so ...
5
votes
3answers
6k views

Can I convert a 1 disk RAID 0 to RAID 1?

This is dangerously close to question 18957, but it isn't quite the same. One of my logical drives on my P410i is a single disk RAID 0 (because I was short sighted at the time). It's now warning ...
2
votes
2answers
1k views

Smart Array P600: Can't get drives recognized on port 2i

Extensive searching proved fruitless (and aggravating), so I'm moving from lurker to poster, finally! :)... I have an HP ProLiant ML-350 G4p that I just converted from SCSI to an SAS/SATA machine ...
1
vote
3answers
24k views

How to find out more hardware details using only ESXi4.1 and (possibly) shell

Running ESXi4.1 on an HP machine, with only remote access to the host ssh shell and the vmware console (no iLO), is there a way to gather a hardware report from the server? I am specifically ...
1
vote
1answer
1k views

HP Smart Array p410i rebuild percentage not correctly working

I have a HP Poliant with a p410i and when I rebuild my raid 5 with a quick remove and insert to test the rebuild percentage goes up to 10% and then jumps to 92%. I continues up to 100% and the Array ...
1
vote
1answer
227 views

HP P410i as online spare

Is it possible to have dual P410i SAS controllers and use one for a online spare? I am fairly new to HP servers and I will be setting up a new G7 for production use. I have been reading about HP's ...
1
vote
2answers
596 views

Using an SAS Expander with a SAS Controller of a different brand

I'm planning on assembling a server, and I'm just wondering if a SAS expander by IBM (such as this one) would allow me to use the RAID and other features (Battery-backed write-back caching) of a SAS ...
4
votes
3answers
3k views

Server cloning: is possible to clone a server using the arrays of another?

Scenario: 2 Server HP Proliant recently bought (exactly the same config), below described. EDIT:HP Proliant DL360 G7 (rack form) 4 (500Gb SATA) disks in RAID 10 configuration Array Alfa: Disks of ...
0
votes
1answer
722 views

HP Storageworks MSA60, one failed disk replaced, all 12 bays flashing rapidly

I replaced a faulty disk yesterday afternoon, and the rebuild process started (RAID6). All disks were previously 750GB, but the only disk I could get is 1TB. Right now, almost 18 hours after replacing ...
2
votes
3answers
3k views

SAS vs SAS2 interface

I´m pretty new to this server environment and I´m looking to expand the capacity of our HP Proliant DL385 G2 server. I want to replace the 146 GB disks with 300 GB disks. My question is: Can I use a ...
2
votes
1answer
794 views

Maximum size of a RAID0 on a HP Proliant DL380 with a Smart Array 410i controller?

I've been tasked with buying a server that needs a ton of storage in a RAID0 (in the 8-12TB range). Since I know nothing about RAID controllers, I figured I could just put 4x2TB into a RAID0 array and ...
2
votes
2answers
2k views

Smart Array P410 RAID controller fails creating logical disk with 2x1TB WD drives

I'm trying to build a new box with an Intel DQ670W Motherboard (8GB RAM + i5/2500) an HP SmartArray P410/512 RAID controller (with battery) 2x WD10EALX 1TB SATA drives I'm falling at (almost) the ...
2
votes
2answers
2k views

HP ProLiant Smart Array “lock up” code 0x11

I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must ...
4
votes
1answer
4k views

Force LUN in a HP Smart Array to rebuild

I have a server that had a failed drive and a drive in Predictive Failure. I replaced the failed drive and it was rebuilding. root@linux:~ # hpacucli ctrl all show config Smart Array E200 in Slot 3 ...
5
votes
1answer
2k views

Identify HP Array Logical Drive From Windows

Probably something simple, but I'm trying to identify which logical drive in my HP Server's Array relates to a particular disk presented in Windows Server 2003. So I have a Proliant DL580 G5 server ...
0
votes
2answers
713 views

HP SmartArray P212 with non HP disks, Insight Diagnostics error

I have an ML110 G6 with a SmartArray P212 and two Seagate (non-HP) SAS disks in Raid 1. When I ran HP Insight Diagnostics I got some errors related to S.M.A.R.T. error testing and I would like to ...
0
votes
1answer
399 views

Lost rebuilding state after every reboot on server with raid controller P410i/zero memory

I have installed a server HP Proliant ML350 with P410i RAID controller with Zero memory, (windows 2008 standard running). I have set up Raid 1+0 with two hard disk SAS and, as usually, I tested raid ...
1
vote
1answer
315 views

Resize a rebuild CPQ hardware RAID

I have a HP/Compaq DL360 with two 73gig HDs and a Smart Array 6i in a mirror, and CentOS 5.5.I'm low on space, so I alternately swapped in two 300 gig units and let the RAID card rebuild them. Now I ...
3
votes
3answers
1k views

How can I speed up the build of a Logical Drive on a HP Smart Array P411?

Is there anything I can do to speed up the creation of the HP Smart Array logical drives? Does creating too many drives at the same time affect the overall performance?
5
votes
2answers
6k views

HP SmartArray RAID controllers - Linux driver differences (cciss versus hpsa)

I've finally started to test the newer versions of RedHat 6.x and Scientific Linux on HP ProLiant hardware. My previous installs were in virtual hardware, so I didn't notice the raid controller driver ...
2
votes
4answers
6k views

Hadoop JBOD disk configuration on HP Smart Array 410/i disk controller

I'm in a evaluation phase of some hw that could be used for setting up a hadoop cluster. This hw is refurbished (hp G6 servers w/ Smart Array 410/i controller) and probably we should/must use it... we ...
1
vote
2answers
884 views

Smart Array E200 - merging logical drives

Server has Smart Array E200 RAID controller with 8x 146GB SAS 10k drives: I have two logical drives. First set is RAID5 with 3 drives and second set RAID5 with 5 drives. Is there a way to merge ...
0
votes
1answer
954 views

Find CCISS version

I'm currently running Ubuntu 10.10, and would like to just find out what version of HP's CCISS RAID array driver I'm running. I've looked around hpacucli and couldn't find anything; can anyone point ...
2
votes
2answers
869 views

HP ProLiant server - multiple raid controllers?

We just got a brand new HP DL370 G6 server with 14 X 146 gb and 2 X 300 gb sas drives. Inside we got 3 raid controllers (one HP DL370, one HP P410 and one HP P812). It has 2 disk bays and each of them ...
1
vote
3answers
2k views

Solaris: detect hotswap SATA disk insert

What's the method used on Solaris to get the system to rescan for new disks that have been hot-plugged on a SATA controller? I've got an HP X1600 NAS which had 9 drives configred in a ZFS pool. I've ...