"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.

learn more… | top users | synonyms

0
votes
1answer
22 views

P410i: replacement disk disk is not synchronizing; Port ID changed from 1l: to 2l:

Little problem: Our SA 410i changed the adress of slot 5 of the disk-backplane from Port 1l: to Port 2l:. I don't know why there were no configuration changes made. We have an HP 380 G6 with an ...
1
vote
1answer
56 views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
2
votes
3answers
310 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
2
votes
1answer
37 views

HP Smart Array P410 Stuck in Ready for Recovery 00.0%

We are using smart array disk controller P410 by HP on our supermicro server. Sadly of the HDDs in a RAID10 Array was damaged and we were forced to change that specific hard disk. After 3 days and ...
2
votes
4answers
5k views

Hadoop JBOD disk configuration on HP Smart Array 410/i disk controller

I'm in a evaluation phase of some hw that could be used for setting up a hadoop cluster. This hw is refurbished (hp G6 servers w/ Smart Array 410/i controller) and probably we should/must use it... we ...
-2
votes
1answer
38 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
1
vote
1answer
36 views

HP ML350 Gen8: error erasing disk cciss/c0d0 on PXE

I Have a ML350 Gen8, that on first PXE Boot, will ask me whether I am sure I want to erase raid controller cciss/c0d0 giving me an option of Yes | No. This only happens when the disks are brand new ...
4
votes
1answer
29 views

HP DL180 G6 amber light but drive is OK

We have an HP DL180 G6 with 25 SFF SATA drives, running 64-bit Debian Linux. A drive recently failed, so we replaced the failed drive with a new, identical part from HP. The disk controller rebuilt ...
2
votes
1answer
1k views

HP Dynamic Smart Array B120i ESXi performance issue

One of our small offices was in need of a small server to perform certain tasks. Because the noise and size an of a regular server i went with the HP ProLiant Microserver Gen8 G1610T. Witch i expected ...
14
votes
2answers
2k views

HP DL380p Gen8 (p420i controller) I/O oddity on XFS partitions

On DL380p gen8 servers using XFS on top of LVM on top of raid 1+0 with 6 disks, an identical workload results in a ten-fold increase in disk writes on RHEL 6 compared to RHEL 5, making applications ...
0
votes
1answer
84 views

Repair HP SmartArray p410i

i have a hp proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that ONE of THREE ...
0
votes
1answer
101 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
1
vote
1answer
50 views

Upgrade the firmware of SAS HDD on DL380 G5?

I have a DL380 G5 server with 146GB single-port HDD (DG146ABAB). The HP Storage Array P400 controller is saying that firmware should be upgraded on these drives. I am running VMware ESX 5.1 (no ...
2
votes
1answer
43 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
0
votes
1answer
68 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
3
votes
3answers
881 views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
0
votes
2answers
71 views

RAID Configuration & File System - What to RAID 1 and what to RAID 0 [closed]

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the ...
1
vote
2answers
98 views

HP Server with P420i - Migrate to RAID 5 Error

I have an HP DL360 G8 with a Smart Array P420i with 3 physical drives, currently setup RAID 0, I would like to migrate to RAID 5. When using the Smart Storage GUI when I attempt to migrate the ...
3
votes
1answer
327 views

Migrating RAID6 array from HP SmartArray P600 to LSI MegaRAID SAS 8888ELP

My customer has an external RAID6 array (8x 1TB in HP MSA60 enclosure) attached to HP SmartArray P600 controller. They have now decided to replace the server and the new one comes with LSI MegaRAID ...
1
vote
1answer
1k views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
2
votes
1answer
81 views

Best practice on hot-swapping disk

I've been putting myself to find an learn more about the product before posting a question. Well, I've tried my luck and didn't got a proper answer to my questions. So I'm posting it here. Had an ...
2
votes
2answers
145 views

Combining SSD and HDD in HP dl380p?

I´m planning to buy a dl380p with 25 sff slots with 2 ssd:s raid 1 and 10 hdd:s raid 5, having room for 13 more hdd:s in the future. Is this possible or do I need two raid cards?
4
votes
2answers
1k views

SAS enclosure doesn't restart - MSA60

I just inherited a HP StorageWorks MSA60 (this is a direct-attach SAS enclosure). I had to move it to another shelf so I turned off the computer which was using it. I also pulled the 2 power cords off ...
2
votes
1answer
331 views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
1
vote
1answer
85 views

How to change the size for HP smart array without losing data

For a HA clustered setup (RHEL 5.8), my HP DL 380p G8 server consists of this: mirrored root disk(RAID 1): array A physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS, 300 GB, OK) physicaldrive 1I:2:2 ...
6
votes
2answers
820 views

Why are “sectors per track” still relevant on a modern OS with modern drives?

I am building out a new machine and the raid controller is asking me for sectors per track. I haven't had to deal with disk math in a long time (1998?), and I can't find anything that pertains to ...
3
votes
1answer
29 views

Raid 5 on two scsi buses with different maximum speeds

I'm quite a noob, I'm trying to set up as a study machine an old HP ProLiant DL385 G1. I've configured a RAID 5 out of six SCSI 3.5" HDDs using: - Smart Array 6i controller; - (4 x SCSI Ultra320 ...
1
vote
1answer
295 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
2
votes
2answers
743 views

HP smart array p400 RAID 1+0; two disks crashed

I am running a RAID 1+0 on a HP ProLiant DL360 G5 with 6 disks (each 146 GB). The mirror groups looks as follows: Group 1 146 GB 1-Port SAS Drive at Port 1l: Box1:Bay1 146 GB 1-Port SAS Drive at ...
3
votes
1answer
62 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
2answers
1k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
1
vote
0answers
256 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
0
votes
1answer
45 views

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point ...
0
votes
1answer
282 views

How to check HP Smart array status on ESXi 5

I've been reading How to run the HP Online ACU CLI for Linux in ESXi 4.x & trying to figure out a way to see the RAID status of the server without having to restart it. This is because, I've ...
1
vote
1answer
176 views

HP DL380 G7 using P410 controller with a SAS Expander card

A sever is fitted with a HP SAS Expander card and 10x disks (2x mirrored Arrays). The server is not detecting any logical volumes or physical disks. So is it ok to bypass the expander card and ...
1
vote
1answer
384 views

HP SSD on ProLiant DL360p Gen8 p420i controller - no TRIM?

We have a HP Proliant Dl360 Gen8 server with the 420i 2Gg disk controller. (646905-421) we have a couple of the HP Gen8 200GB 6G SAS SLC SSDs (653078-B21), (they run in RAID1) We run Debian6 on this ...
3
votes
2answers
377 views

How can I monitor HP P410 hardware RAID degraded in Freenas

I would like to run freenas on a HP P410 hardware RAID 5 4x600GB 15k SAS array and be alerted in the case of physical disk failure, however the freenas documentation says: to prevent problems, do ...
1
vote
1answer
424 views

HP Proliant ML350 G6 Smart Error Test

I have a ML350 G6 with two array controllers : P410 and P410i. I have updated all possibile firmware on this server. I have 5 x Seagate Savvio 10K SAS drives. I am testing the drives with HP Insight ...
3
votes
4answers
850 views

HP Proliant DL180 G6 - Smart Array P410, bay 11 error

I've been trying to search over ther internet for a solution to fix this. I'm the new IT person for my organization and our previous IT have not kept any records on certain things. I do understand, ...
2
votes
2answers
720 views

HP ProLiant server - multiple raid controllers?

We just got a brand new HP DL370 G6 server with 14 X 146 gb and 2 X 300 gb sas drives. Inside we got 3 raid controllers (one HP DL370, one HP P410 and one HP P812). It has 2 disk bays and each of them ...
1
vote
2answers
297 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
1
vote
1answer
297 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
1
vote
1answer
1k views

HP P410i Array Controller and lost logical Drive

Today earlier we lost the logical drive information for a 4 drive raid array that was array B! The system had two arrays A and B A being the single system drive and B the Data drive of 4 x 136Gb ...
3
votes
1answer
1k views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
3
votes
1answer
114 views

RAID 5 drive upgrade

We have an HP ProLiant ML350 G5 server with an 8-bay RAID 5 array configured on a Smart Array E200i controller. The system volume and data are on the same logical drive. The drives are 72GB each and ...
3
votes
2answers
127 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
3
votes
2answers
795 views

HP DL320e Gen8, 3TB drives, Windows Server 2012 R2 - HDD full capacity alocation difficulties during installation

One interesting task to do but not so easy as i thought. The server is HP DL320e gen8, The main difficulty is with partitioning the RAID1 (2x3TB HDDs) during the installation on 2 partitions (System ...
5
votes
1answer
2k views

Identify HP Array Logical Drive From Windows

Probably something simple, but I'm trying to identify which logical drive in my HP Server's Array relates to a particular disk presented in Windows Server 2003. So I have a Proliant DL580 G5 server ...
1
vote
2answers
2k views

HP DL380e Linux not seeing drive array for installation

I am trying to install Linux and FreeBSD on a HP DL380e. However, during the installation process all of the OS's are stating that they can't find any disks to install to. Even RHEL. If I try to use ...
3
votes
2answers
12k views

Can't enter HP SmartArray P410 RAID ORCA set-up on HP ProLiant DL320G6

I've just installed an HP SmartArray P410 controller into my HP ProLiant DL320G6 server. The controller seems detected by the server BIOS (it shows up in controllers list in the BIOS set-up), hard ...