0
votes
1answer
15 views

MDADM remove drive during recovery

I would like to know that can I remove a drive during a recovery process from a RAID1 array: What happend is that SDD had bad sectors, I removed it with mdadm --manage /dev/md0 --fail /dev/sdd1 ...
0
votes
1answer
119 views

Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When ...
1
vote
2answers
58 views

Should I partition a RAID or just create a file system on it? [duplicate]

Given a RAID 6 created from 6 drives /dev/md0 which should be used fully for data (no booting from it, root and swap are on a different drive), should I create one partition on that device and then ...
2
votes
1answer
134 views

Unable to mount '/dev/sda'

My server has two 2 TB hard disk drives in soft RAID 1. I can't mount /dev/sda. Output of parted -l root@rescue:~# parted -l Model: ATA HGST HUS724020AL (scsi) Disk /dev/sda: 2000GB Sector size ...
2
votes
1answer
29 views

Raid 5 URE rate [duplicate]

I've recently read this post: http://www.standalone-sysadmin.com/blog/2012/08/i-come-not-to-praise-raid-5/ tldr; It basically says that the error rate of a RAID system is tied to the hardware, and ...
0
votes
0answers
22 views

mdadm: All RAID disks look good, but can't access devices

Now, granted, issues with RAID rarely come up (at least with the one that I have to deal with in my life), so I'm not the most experienced person in the world. However, I'm not seeing any issues with ...
1
vote
0answers
203 views

Ubuntu 14.04 mdadm issues on boot

I have a 14.04 Ubuntu machine which has: 2 x SSD in RAID 1 (md0) 3 x Sata HDD in RAID 5 (md1) The machine is set to boot from the md0 device. This machine has been running fine for a month or so, ...
1
vote
2answers
254 views

Will expanding my Synology Hybrid RAID delete the data on the initial disk?

As the title states, I currently have my Synology NAS with a single 4TB drive in it. I now wish to expand this with another 4TB drive. If I expand the volume (it's currently setup as SHR) will the ...
1
vote
0answers
39 views

Software-RAID with ext4 but without 64bit support

last year I set up a Software-RAID5 with 5x3TB yielding 12TB of usable capacity. Just today, needing more storage, I have finished growing the RAID to two more 3TB disks: Personalities : [linear] ...
1
vote
1answer
62 views

How to copy RAID 1 HDDs from one server to another Identical server

I have one IBM X3100M4, type 2582 windows server and having 2 x 500 GB HDDs in RAID Copy. Now brought new server and having blank HDDs. How can I copy RAID HDDs from Old server to new server? I have ...
0
votes
1answer
45 views

Missing partition from RAID 0 array - what can be recovered?

System is Fedora Linux, there is RAID 0 array set up via mdadm that have bound together partitions /dev/sda4 and /dev/sdb4. Lately, /dev/sdb failed and became unreadable. Naturally, I started ...
0
votes
1answer
33 views

Raid1+0: create stripe over two /dev/mdx on partition or not?

Given that I haven't found a way to define how a Raid10 is created with mdadm, i went the Raid1+0 solution. How to display/define Mirror/Stripping pairs with mdadm mdadm --create /dev/md0 --level=1 ...
1
vote
1answer
73 views

How to display/define Mirror/Stripping pairs with mdadm

I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different ...
4
votes
2answers
297 views

What steps should I take to best attempt to recover a failed software raid5 setup?

My raid has failed, and I'm not sure what the best steps to take are in order to best attempt to recover it. I've got 4 drives in a raid5 configuration. It seems as if one has failed (sde1), but md ...
1
vote
0answers
61 views

Upgrade Raid 1 to Raid 0+1 and bootloader issue

I am trying to convert my current RAID 1 to RAID0+1 and facing issue in installing bootloader - please have a look what i am doing. My current configuration is RAID1(2*10GB): [root@localhost ~]# ...
0
votes
2answers
58 views

Transfer from RAID-1 to RAID-0 — easy as cloning?

I have a RAID-1 of 1TB drives using on-board RAID. I have 2 new 240GB SSDs I want to place in RAID-0. This is Windows Server 2012. I know with disk cloning/transferring that it is important going ...
-1
votes
2answers
674 views

What is the performance implication of hardware vs software RAID in 2-disk RAID0/RAID1 setup?

I am choosing between two similar models of servers, one of which has software RAID, while the other hardware one. Servers in question are SYS-E32-1 and SYS-E32-3 from So you Start (an OVH brand) and ...
8
votes
4answers
754 views

SW SSD Raid 1 over HW RAID 10

A provider(data center) recommended I go with 1TB SSDs in a software RAID 1 over HW RAID 10 with mechanical drives. Their quote: Typically SSDs are most reliable than RAID cards and since you ...
1
vote
2answers
82 views

Check badblocks on RAID-0

Without RAID-0, I usually check bad sectors using this command: fsck -yvckfC -E fragcheck /dev/sdX How to check bad sectors when the harddisk was using RAID-0? should I run it for each drive? ...
0
votes
0answers
101 views

Software RAID: file system becomes read-only, mdadm fails with SEGFAULT

I have software RAID1 on Ubuntu 10.10 (Linux ubuntu 2.6.35-32-generic-pae). It is dedicated server I control via SSH. Yesterday datacenter people changed one HDD which was crushed. I did not run ...
0
votes
1answer
57 views

Is it possible to write into RAID chunk multiple times?

As far as I know, (most) file-systems do not support one to write into file-system cluster multiple times. In other words, cluster is the smallest unit in file-system and even if a single bit of ...
0
votes
0answers
49 views

mke2fs.ext3 stripe-width option missing

I'm trying to set up an ext3 filesystem on a RAID 6 array (with 6 disks) on XenServer 6.2 linux. All the help I can find tells me to use the -E stride=xx,stripe-width=xx options. However my version ...
1
vote
0answers
104 views

Why was the replacement drive for failed drive in RAID 1 (linux software raid) was added as a spare?

I have a two drive linux software raid 1 for a server. There are two raid devices. (Boot (md0) & OS (md1)) Last week one of the drives failed so i ordered a new one. Today i shutdown the server, ...
1
vote
0answers
939 views

How to recover an mdadm array on Synology NAS with drive in “E” state?

Synology has a customized version the md driver and mdadm toolsets that adds a 'DriveError' flag to the rdev->flags structure in the kernel. Net effect - if you are unfortunate enough to get a array ...
0
votes
0answers
96 views

mdadm array fails to start at boot, bad superblock on component drive

At boot my mdadm raid5 array fails to start, saying that one of my disks (sdi) has a bad superblock. However, once I log in, I can start the array no problem with mdadm --assemble /dev/md0 ...
-1
votes
3answers
613 views

Turn off RAID on HP DL380? [duplicate]

Can anyone tell me how I can turn RAID off on a DL380-G5. I just want the disks connected directly without any RAID as I want to use this to test Microsoft's software RAID. Can't seem to find ...
-3
votes
1answer
61 views

What are the pros/cons of software raid made up disk connected over SATA and others over USB? [closed]

I would like to use RAID1 with 1 SATA disk and 2 USB disks PS: This is an ARM board (cubietruck) with only 1 SATA port and 2 USB ports. PS2: The OS boots from a SD card :) PS3: The setup does not ...
3
votes
1answer
102 views

RAID-5 array being split on reboot (ubuntu)

I've set up a RAID-5 array on Ubuntu 13.04 (kernel 3.8.0-27-generic) using mdadm - v3.2.5 - 18th May 2012. It appears to work fine and be in high spirits: $ cat /proc/mdstat Personalities : ...
0
votes
1answer
245 views

Can I use a RAID card with chipset SIL3124 with no driver?

I have a software RAID card with a SIL3124 chipset. (This one). As you configure the RAID via BIOS, is it possible to use this card with 3 disks (RAID 5) with any OS without installing any driver on ...
0
votes
1answer
30 views

mdadm grow operation giving nonstop libata errors

Running Debian 7, mdadm 3.2.5. I issued a command to grow a 5 disk, 3 spare raid 5 array to an 8 disk, 0 spare raid 6 array: mdadm --grow /dev/md0 --level=6 --raid-devices=8 ...
0
votes
1answer
557 views

RAID1 on existing CentOS6 Install

I have two 500GB hard drives in my server. Currently, there is no RAID configured, but CentOS6 is installed (as a bare install for now). Is it possible to set up a software RAID-1 so that both drives ...
0
votes
2answers
134 views

Path of md device wrong after reboot

I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that ...
3
votes
1answer
78 views

ZRAID1 pool size bigger than expected

I have 3x 4TB drives for a ZRAID1 config (single parity drive) After running zpool create data zraid1 sdb sdc sdd I have a volume that's 10.9T in size, which is what I would expect from a stripe ...
-1
votes
2answers
78 views

What is the correct way to create new raid5 in Linux?

I added some new disks, and tried to create new array, using: mdadm --create /dev/md/2 --level=5 -x 0 --raid-devices=4/dev/sd{a,b,c,g}2 It creates the array, but after reboot - it's gone. What ...
0
votes
1answer
96 views

Sharing an EC2/EBS RAID10 Array using NFS

I created a 10 disks RAID10 using EBS on AWS EC2 using mdadm on a ubuntu 12.04.2 LTS instance. Let's call this instance A. It works fine and I can create files and folders perfectly in the volume. I ...
0
votes
2answers
397 views

Slow software raid with SSDs

We have moved a web application with an Oracle database to a new server because the old one was dying. The old server had two mirrored hard discs plus a separate non-mirrored SSD for the Oracle ...
0
votes
1answer
83 views

Does the built-in CentOS software RAID distribute writes?

Will I see a write performance increase going from single disk to CentOS Software RAID10? Any industry estimates on the % increase?
2
votes
1answer
411 views

How to get email alert if one of raid 1 disks fails?

I need to know how can I get email alert if one of raid 1 disks fail to work/crashes. I have CentOS 6.4 64bits, software raid. I did some mistake folowing this tutorial, because it was a bottom note ...
0
votes
1answer
151 views

Installing Raid 1 on Ubuntu 13.04

I am trying to install raid 1 on my new ubuntu server using software raid. My drives are 2 x 3TB I have set the format of the drives to gpt. Created 3 partitions (1mb - grub) (2gb swap) and the ...
2
votes
2answers
78 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
0
votes
2answers
183 views

HDD in RAID failure?

I received some alerts from mdadm. Further checking seem to indicate that some HDD's may be damaged. Could you please verify that? There is two SCSI drives which should work in RAID1 This is an ...
2
votes
2answers
1k views

Using software-RAID vs “firmware”-RAID (a.k.a. FakeRAID) [closed]

We recently bought a tower server on which I want to install Debian. I thought the device had hardware RAID, as I could see a BIOS screen. As it turns out, it's still a software RAID. When I configure ...
1
vote
1answer
1k views

Linux RAID5 Optimal Chunk Size

I bring up, yet again, the ever-present question of how to best optimize disk structures. In my organization, we have a 14TB Linux software RAID array dedicated to storing backups made using Symantec ...
0
votes
3answers
161 views

RAID 5 with two failed devices

I have a software RAID 5 with 6 devices and one of them needs to be rebuilt. Until now, everything is OK. But, while the disk is rebuilt, it was found bad sectors on another disk and is being marked ...
2
votes
1answer
260 views

How to grow mdadm RAID5 into degraded state?

mdadm - v3.2.5 - 18th May 2012 Currently have: Version : 1.2 Creation Time : Tue Jun 25 19:03:31 2013 Raid Level : raid5 Array Size : 2930135040 (2794.39 GiB 3000.46 GB) Used ...
2
votes
1answer
176 views

Performance of Linux software raid-1 across SSD and HDD (partitions)

How does Linux software raid-1 work across disks of dissimilar performance. Would a raid-1 across ssd and hdd partitions give me a mirror of the ssd contents while not impacting the read speed? I ...
1
vote
1answer
738 views

How to get notified of mdadm RAID problems?

I am running Ubuntu 12.04 LTS. Yesterday I found a message in my mailbox saying that my server was shut down. I proceeded to reboot the system, but it didn't come up after many minutes, and I didn't ...
1
vote
1answer
146 views

it is good and safe to use debian software raid?

My questions is as simple as the title: it is good and safe to use debian6 software raid? How safe it is? Can i have a software RAID configuration backup? How can i deal/recover with/from a HDD ...
1
vote
1answer
370 views

Remove “faulty state” in RAID 1

I wonder if there is any possibility to remove the state "faulty" in a RAID 1 if (for example) someone failed the wrong hard disk. I already searched for answers with Google and fout several ...
0
votes
1answer
446 views

mdadm - raid device name changed on reboot

I'm not sure why, but after I restarted my ec2 instance, /dev/md0 didn't start as it normally would. after I saw what's available in /dev/md*, instead of seeing /dev/md0, there is a device there named ...