Solaris is a UNIX certified operating system owned and developed by Oracle for SPARC, x86 and x86-64 processor architectures.

learn more… | top users | synonyms

3
votes
1answer
70 views

Recovering data from ZFS mirror

I have two disks from an old server that I believe were a mirrored set. I placed them in a new server and tried to do a zpool import but nothing was found. Does that mean the data that was on them ...
3
votes
1answer
346 views

Solaris 10: BIND 9 Chroot Service fails to start with SVCADM but works when run manually from root

I recently upgraded with Solaris patches and after the reboot my Bind Named services go into maintenance mode. bash-3.2# svcs -xv svc:/network/dns/server:chroot (?) State: maintenance since Thu Nov ...
2
votes
1answer
576 views

How can overlapping NFS permissions be configured?

I am running Solaris 10 on my NFS server. I am struggling with how to setup read-only access to a share from a subnet, but allow read-write access from a system within that subnet. On the Server: ...
2
votes
1answer
201 views

Start a screen through svcadm with Solaris 11

I am running into a problem when trying to start a detached screen through a Solaris 11 service. This service controls nginx. When I reboot the system, the screen doesn't start, but if I issue ...
2
votes
1answer
388 views

Solaris network configuration (poor performance)

I am wondering if there is anything in the Solaris 10 configuration that I may be able to change to resolve a strange network performance issue I'm facing. I have two Solaris 10 machines, both of ...
1
vote
1answer
74 views

On Solaris, can I create a user account in a single command line entry that is not disabled, but is password disabled (only allows SSH)

I am building a script for SA's to follow when performing a certain task. That task requires adding a user to a system that can only SSH to the system (using a key) and not log in with a password. ...
1
vote
1answer
196 views

NFS mount still connected even after box is disconnected from network

I have a mount between a RHEL 5.6 and a Solaris 6 box acting as the NFS server. My mount options are simply rw,intr. When I disconnect the RHEL linux box from the network I am still able to write ...
1
vote
1answer
139 views

Solaris 10 sendmail won't execute my program in /etc/aliases without setuid root

I have a program that gets called when an incoming email arrives on a Solaris 10 machine by using /etc/aliases. So far the only way to get sendmail to execute this program is to set the the setuid bit ...
1
vote
1answer
208 views

SVN Server LDAP Authentication Error: User is not unique

I'm getting the following error when Apache (running on Solaris) tries to authenticate against LDAP for a specic user for SVN server: auth_ldap authenticate: user abc authentication failed; URI ...
1
vote
1answer
236 views

Unix Server unreachable, but responding to ping

I'm unable to login to my Solaris box, but its responding to ping when I do ping hostname I see the following messages under /var/adm/messages FATAL 2035: sslgets - SSL_read error - ...
2
votes
0answers
140 views

Solaris 10 invalid ARP requests from 0.0.0.0? Link up/down every hour or 2

The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me ...
2
votes
0answers
737 views

Configuring LACP between OpenIndiana (Solaris) and a Cisco C3560

I am running OpenIndiana (oi_151a8) and have two NICs aggregated using LACP connected to a Cisco WS-C3560G-48TS. Both the server and the switch show the aggregate link as up. But while link layer ...
1
vote
0answers
28 views

Granting user enough privileges to run ifconfig on IllumOS (OmniOS)

I sense this should be a very simple question, but somehow I cannot find a solution. I have a non-root user and I would like to grant this user enough permissions or privileges, so he can run ...
1
vote
0answers
176 views

Intel 10Gbps NIC not working within Solaris 11

I'm working within Solaris 11.1 on hardware that is on the Solaris 11 HCL. My Intel X520-DA2 is failing to initialize. Jun 14 03:11:32 ATM-Front-End-1 ixgbe: [ID 611667 kern.warning] WARNING: ...
1
vote
0answers
30 views

Can I force nfsd on Solaris to announce more free space than physically available?

I'm working with various Solaris based distributions (OmniOS, SmartOS, Nexenta) and I have a highly compressible and deduplicable data set on a very small amount of high performance storage. The ...
1
vote
0answers
555 views

Cannot set up blueimp jquery upload server for Node using SMF on SmartOS

I set up a node blueimp jquery file upload server on a Joyent cloud SmartOS SmartMachine (nodejs 13.1.0) instance. It works fine if I manually start it using the command ...
1
vote
0answers
195 views

Speed up Eclipse over X server

In my job we have tight security rules, so the development environment is all virtualized. Each developer has a workstation with Windows XP and Citrix Metaframe. From the Metaframe, the developer ...
1
vote
0answers
311 views

ZFS: Why does resilvering go over all disks in a pool rather than only those in the raidz1 vdev?

I'm wondering why Solaris is reporting action: Wait for the resilver to complete. scan: resilver in progress since Sun Jul 14 02:42:44 2013 24.9T scanned out of 39.2T at 54.9M/s, 75h46m to go ...
1
vote
0answers
364 views

Error sh: line 9: 19705: Memory fault (coredump) in case of OpenSSH installation

I downloaded openssh-6.1.p1/tar.gz with http://mirror.corbina.net/pub/OpenBSD/OpenSSH/portable/. I made at first ./configure, then make which, it seems, fulfilled without errors (Nexenta Illumos ...
1
vote
0answers
222 views

Virtual fiber channel HBA in Solaris

We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't ...
1
vote
0answers
215 views

Solaris x86 11.1 and qlt driver — only 3/4 ports attach

I'm using the QLogic QLE2564 4-port 8Gb HBA. The problem I have is that when I attach the qlt target mode driver to the card, only 3/4 ports attach the driver. ffffc10006854e58 pciex1077,2532, ...
1
vote
0answers
116 views

Accidentally resilvered 2 drives

We had 2 failed drives in our ZFS raidz1 pool. One had been resilvered to a spare and another was just out. The pool was in degraded mode. I replaced both drives and began the resilver on the ...
1
vote
0answers
677 views

Solaris 11 SMB server sometimes becomes unreachable for some Windows XP clients

I've got a Solaris 11 box acting as a NAS/SAN for both a small virtualised environment (over iSCSI and NFS), as well as a central filestore for a global team (over SMB). It works fine for most people, ...
1
vote
0answers
48 views

making a Solaris JET server multihomed

I've got a Solaris 10 x86 JET server which I need to multihome so it can jumpstart clients on a new LAN Whats the process for configuring the JET to serve configs for more than one network ?
1
vote
0answers
479 views

IPsec tunnels between Linux and Solaris

I have a Solaris machine sitting out in the ether somewhere that I would like to make part of my network via IPsec. I have this working between Solaris machines but not between Solaris and Linux. I ...
0
votes
0answers
26 views

Solaris SSH Server Log Destinaton IP Address

To stay compliant, it's required that my Solaris 10 SSH server log the destination IP address in addition to the existing port logging. Is it possible to add the destination IP address in the authlog? ...
0
votes
0answers
26 views

writting to disk is taking more time in solaris

writing in disk taking more time, application is not working properly due to this delay in disk on solaris machine. how to find out the disk(md500) is faulty or anything problem with disk $ iostat ...
0
votes
0answers
46 views

Solaris 10 inside KVM (Ubuntu 14.04) - network card not working

I have a problem with getting network running on a Solaris 10 guest running on a Ubuntu 14.04 kvm host. Installation of the guest runs fine but I can get no network connectivity from the guest to the ...
0
votes
0answers
16 views

Installing Tivoli TWS from the command line on Solaris

Is there a HOW-TO or tutorial for installing Tivoli Workload Scheduler 9.2 from the command line? Solaris 11 preferred but anything Unix-like would be helpful. Explanation: the person in charge ...
0
votes
0answers
23 views

Remote server lost login information during puppet deploy

Let me discuss some background on how this situation came to be first. Skip the first paragraph if you're not interested in the details. I am in a committee in my study community that manages said ...
0
votes
0answers
31 views

CIFS shares disconnection

On a SOLARIS system I have a CIFS share on which clients access via AD. The problem is that it desconnects (once a day maybe) when it should remain persistent. I have every time to rejoin again to the ...
0
votes
0answers
77 views

What is the proper Solaris 10 (x86) driver for the HBA “LSI SAS3801E”?

The pre-installed driver is called mpt, but there's also one called itmpt and a itmptfc. And then there's mpt_sas. How do I know which one to install? Here's some more info: $ ...
0
votes
0answers
29 views

Solaris 11: How can I limit the number of concurrent users with PAM?

I have a solaris 11 machine that has PAM helping in an authentication process for an obscure service called netatalk. I know that PAM is involved in client authentication to the service, so if I can ...
0
votes
0answers
66 views

Cannot connect to Solaris Server when Oracle GoldenGate process uses the port

I'm trying to test the Oracle goldengate to replicate data between two databases on the same server. So I installed two databases and two goldengate homes in the same machine. The goldengate ...
0
votes
0answers
61 views

Why does samba include seemingly bogus “supplementary groups”?

Our environment is subject to the "16 group limit" with Samba. We are using Samba version 3.6.12. Basically if a user is in more than 16 groups, the whole system gets hosed and things go haywire. ...
0
votes
0answers
234 views

Unexpected EOF write error

We have a Sun Solaris 10 server that is failing to backup using tar to write to tape. tar cEf /dev/rmt/0cn . The complete error is tar: write error: unexpected EOF tar error code 2 The ...
0
votes
0answers
99 views

zfs checksum verfication failed, solaris booting failed

Looks like my solaris 10 got hosed overnight for unknown reason. I get below error while booting and also when trying to cat menu.lst file in grub. Hard disk is being detected by ubuntu so it may not ...
0
votes
0answers
12 views

snoopexec with parent processes and full command path and args?

How would I coax the excellent execsnoop script into also providing full command path + args and the parent process pid + its name?
0
votes
0answers
48 views

The snoop captures the same packet more times

My UDP client and server applications both run on Solaris 10. The UDP Server receives a request from client, then it sends a response to client. But the snoop in server captures about 18 same ...
0
votes
0answers
49 views

Solaris 8 x86 - autofs - /net/fileserver/abcd — apparently mounted volume hangs

I have a situation where I have tried to cd to something /net/fileserver/abcd and the cd hangs. Information: 1. filerserver is alive and well and pingable from the client 2. Restarting ...
0
votes
0answers
185 views

mailx does not deliver mails anymore

On my Solaris machine, mailx suddenly stopped delivering mail messages. When running the following sample command: echo "test" | mailx -vvv -s "test" [reciever] I get the following output: ...
0
votes
0answers
189 views

Solaris LDAP client: nss Failure to load dynamic library

On Solaris 10 and 11, I have successfully set PAM_LDAP up. The Solaris host uses a remote LDAP for user authentication. However, I am unable to get TLS working. ldapclient setup I initiate my ...
0
votes
0answers
78 views

Solaris /etc/xdg/autostart root script pam_authenticate conversion failure

Im running SOL11.1 and have setup a desktop file to run in /etc/xdg/autostart this calls a main script which calls other scripts. The regular commands work. But the sudo commands doesn't seem to ...
0
votes
0answers
154 views

LDOM Guest Not Booting from NFS Mount

I have an LDOM Guest whose drive is located on an NFS mount. I'm having difficulty booting up some of the guests after the mount is restored. I'm getting the following error in the console: WARNING: ...
0
votes
0answers
120 views

solaris 9 + metastat + State: Unavailable

please advice I have Netra HW machine with Solaris 9 from metastat command I see the following problems "State: Unavailable" , I give here partial output because the output is very long please ...
0
votes
0answers
70 views

ndbd on solaris 5.10 can not allocate more than 4gb heap

I have a 2 data node mysql-cluster with 16gb memory and 10gb datamemory. I am trying to add two new data nodes on solaris 5.10 64 bit 16g ram machines. But I can't start the data nodes with more than ...
0
votes
0answers
66 views

How to check how many external hosts have mounted and accessing a unix (solaris) folder?

We have a local folder in a central Solaris machine(used as a repository) and would like to find out how many external hosts have currently mounted the folder and accessing the files. Is there any ...
0
votes
0answers
112 views

Solaris memory allocation

I have solaris system that installed 12 GB RAM. All running process consume about %65 memory. I start to application that tshark (wireshark command line alternative). Tshark complete parse a ...
0
votes
0answers
72 views

Solaris and Hot-Standby

i have a short question. is it possible to create a hot-standby-cluster with 2 nodes and solaris 10? in Linux i would use DRBD and Hearbeat/corosync, but in Solaris? maybe do you have an tutorial? ...
0
votes
0answers
1k views

pkgrm + force remove of solaris pkg

I need to remove the pkg TIME-SV from my solaris 10 ( I need to use the pkgrm -a none ) to force removing but pkgrm ask me about "Enter path to package base directory" which PATH I need to enter ? ...