1
vote
1answer
53 views

6 times slower disk write in RAID10 on Ubuntu 14.04 after rebuild

OS: Ubuntu 14.04 LTS Software Raid 10: 4x120Gb Intel 530 SSDs Initial tests: 1.2 GB/s Write 5.2 GB/s Read I did some tests to check if everything will go alright with a failed disk: I set as ...
1
vote
0answers
109 views

SSD+MDRAID+LVM+KVM results in lower performance than expected

We use kvm for virtualization, the disk images are stored as logical volumes. The logical volumes are stored on a bunch of software-RAID1 (mdadm) arrays composed of Intel DCS3500 SSDs (each array is a ...
0
votes
1answer
758 views

Is it possible to use SSD for storage on Windows Azure?

There is some marketing-speak suggesting that it may be possible ..: http://gigaom.com/2012/06/05/new-windows-azure-goes-all-ssd-to-one-up-amazon-in-the-cloud/ .. but I couldn't find any way to ...
0
votes
3answers
195 views

Does software RAID-0 really improve performance?

I am going to lease a server and I have two options, SATA or SSD, I decided to save the money and go for the SATA option. But I do not need all that storage they are giving me! So I thought MAYBE I ...
1
vote
1answer
281 views

How to erase a SSD to restore factory performance in Linux?

Due to big performance issues with an mdraid-1 array I'd like to pull down from the array one of the devices (Samsung 840 Pro), erase it to restore factory performance and re-add it to the array. The ...
1
vote
1answer
364 views

Various problems with software raid1 array built with Samsung 840 Pro SSDs

I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: ...
0
votes
3answers
194 views

I/O on SSD hosting a DB periodically hangs with queue length peaks of 800+

i have a problem which i cannot identify correctly. I have a process (on WinSrv 2008 R2) which imports data into Mongo DB and periodically whole system freezes - once per 5-10-15 minutes for about ...
0
votes
1answer
337 views

Which alternative is most performant (raid, ssd, 15k rpm disks)

I'm looking at the DELL PowerEdge™ R720 from Hetzner. This server has a Dell PERC H710 8 Port SAS/SATA 6GBit/s raid controller. I have the choice between: 3 x 600GB SSD (MLC SATA 3Gb/sec) 6 x ...
-1
votes
1answer
508 views

Disk IO in Linux is slow (2MB/sec) while in Windows its fast (400MB/s) [closed]

I have a server with an ASUS board with a 256GB SSD In Windows, using HDTune my drive shows 400MB/sec on Linux, I'm getting about 2MB/sec using root@desktop:/# dd if=/dev/zero of=/foo bs=1024k ...
0
votes
0answers
184 views

RAID10 (4x SSD) system is super slow for 'dd' and 'find' commands

I have configured two servers each with 32 GByte RAM, 2x Xeon 2.4 GHz, 4x 480 GByte Intel SSD on a LSI MegaRAID SAS 9261-8i controller. They should be identical, however one of them has a very poor ...
3
votes
1answer
2k views

Why does storage's performance change at various queue depths?

I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and ...
-3
votes
1answer
194 views

Raid 1/0 SSD vs 2 x non-Raid SSD [closed]

I have a question about speed performance with two separate SSD drives comparing them to RAID mirror array. I do not like idea to setup RAID 0 with 2 x SSD drives because of high risk of data loss, ...
5
votes
1answer
2k views

Why the performance decrease for an SSD when using Hyper-V?

I've just installed my new M4 256GB on a Windows Server 2008 R2 Hyper-V server. On the host system using Crystal Disk Mark I've got 212 Mb/s as 4k QD32 write performance, but when I create a VHD disk ...
1
vote
3answers
1k views

How to use 2 SSD disks for best performace?

I am going to format 2 120GB Intel 320 SSD to be used for a high traffic Drupal server. The server had Xeon E1270 CPU and 32GB RAM. I'm using Debian Squeeze 64 bit. Here are my questions: What ...
0
votes
3answers
707 views

What HD/SSD performance benchmarks are relevant to SQL Server?

I'm looking to buy an SSD for a SQL Server computer, what benchmarks should I be comparing? High/low queue depth? Random/sequential transfer rates? IOPS?
2
votes
3answers
1k views

SSD, AHCI and write performance

We've started to deploy SSD drives to our developers workstations. At this moment we're having the unpleasant surprise that the systems using the new SSDs often freeze, with the HDD activity led ...
1
vote
3answers
4k views

Can cloning a hard disk drive to a SSD drive physically damage the SSD or the performance of the SSD?

I have a new SSD drive, I want to use it to replace the old mechanical hard disk drive in a laptop. The laptop had a new O/S (Windows 7 64-bit) installed about 9 months ago and I want to know if it's ...
0
votes
5answers
666 views

What are the more reliable SSDs to use in an enterprise environment? [closed]

We all know SSDs are fast... but aren't all that great when it comes to any computer that writes to disk many times in any given minute. Are there any SSDs that are suited for an enterprise ...
1
vote
2answers
882 views

How much space should I leave free on an SSD to ensure performance and stability?

I have heard from various sources that if you use close to all of the storage on your disk you will run into performance and/or reliability issues. Is this also true of SSDs? If so how much free space ...
5
votes
7answers
2k views

setup lowcost image storage server with 24x SSD array to get high IOPS?

I want to build let's name it a lowcost Ra*san which would host for our social site the images (many millions) we have 5 sizes of every photo with 3 KB, 7 KB, 15 KB, 25 KB and 80 KB per Image. My ...
-1
votes
1answer
286 views

Performance question fast cpu vs. ssd drive for web application [closed]

I need to setup a dedicated server for running a web application with sql server at the back end. Only thing at this point matters to me most is the performance for web users. Here are my choices: ...
2
votes
1answer
829 views

Install MySQL on SSD, best mount options?

I want to install the mysql-server on my SSD, what are the best mount options for this? (/etc/fstab) What else I can do to increase the SSD Speed? My current configuration: /dev/sdc /ssd ext4 ...
1
vote
3answers
282 views

Experience with Intel X25-M 160GB and Oracle

We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data ...
3
votes
6answers
506 views

For a new database server, which partition will benefit the most from SSDs?

I'm speccing a new database server for a Microsoft SQL Server environment. In the past, I would create four separate RAID arrays for OS, data, transaction logs, and tempdb. Now, I am looking at the ...
1
vote
2answers
470 views

Will solid state drive improve performance of a database?

I have a Microsoft SQL Server 2008 database which contains approximately 3 GB of data. The server has 4 GB of RAM. The database is used both for reading and for writing data (lots of changes). The ...
4
votes
2answers
2k views

ZFS with L2ARC (SSD) slower for random seeks than without L2ARC

I am currently testing ZFS (Opensolaris 2009.06) in an older fileserver to evaluate its use for our needs. Our current setup is as follows: Dual core (2,4 GHz) with 4 GB RAM 3x SATA controller with ...
4
votes
4answers
2k views

dd vs. secure-erase for reconditiong SSDs

Does writing zeros to an entire ssd (dd if=/dev/zero of/dev/sdX) give the same performance restoring effect that you get from a "secure erase", or does secure erase do something else as well? ...
5
votes
1answer
495 views

Slow SSD Read on Server 2008 SP2

Im using a Intel X25-M 80G with the latest firmware. on XP /w using IDE and WIN7 using AHCI I get read speeds up to 250MB/S. But when running it with Server 2008 SP1 or SP2 on AHCI, I get read speeds ...
4
votes
6answers
2k views

How SSD hard drive affected speed of your website (asp.net/linq/ms sql database)

I have a small database (<1G) But we have a lot of complex logiс in website and client complains on render time, which is 3-5 seconds. We are not google, and thousands of users a day is our dream, ...
0
votes
1answer
59 views

Relative seek times for various types of storage media

Does anyone know the approximate time required to retrieve and modify a kilobyte of data for various types of storage media in a typical modern server? Specifically: RAM Hard disk SSD This would ...
7
votes
4answers
4k views

Using SSD as disk cache

Is there software for Linux to use an SSD as disk cache? I believe that Sun does something like this with ZFS, though not sure. A quick search provides nothing suitable. The goal would be to put ...
2
votes
6answers
2k views

“Raid 0 SAS” versus “2nd generation SSD”

i was planning to buy a SAS system made of two 15k RPM disks in Raid 0 configuration to give a boost to my s.o. and my apps... but after i saw that article on Coding Horror, i've started to thinking ...
3
votes
3answers
837 views

Recommended 256 GB SSD for Linux servers

I need some relatively-affordable 256 GB SSD drives for a Linux application where fast seek performance (many IOPS) is more important than sequential throughput. The ratio of reads to writes is more ...
1
vote
2answers
1k views

NTFS journal on different (SSD) disk

Some advanced file systems, like ZFS have the option of using SSD disks as a second level cache for the file system or for the journal. Is this possible with NTFS?
4
votes
4answers
2k views

SSD drives and RAID configurations vs LVM

Background: I'm familiar with the basic RAID levels, and am curious to know if using SSD devices in a RAID0 or RAID5 would be a better deployment than adding them to a large LVM volume. ...
7
votes
10answers
15k views

Configuring SQL for optimal performance… SSD or HDD?

Does anyone know of any comparisons that show how SSDs compare to HDDs for performance in a SQL environment? I'm trying to understand what type of performance benefit might be gained by moving to ...
1
vote
1answer
174 views

how to achieve rated full read speed from an SSD?

how to achieve rated full read speed from an SSD?
3
votes
3answers
2k views

SSD + LUKS performance comparison?

Our laptops and portable drives must be LUKS encrypted. LUKS doesn't really seem to cause much performance loss on normal laptop hard drives (7200RPM) for us. With the crazy data rates you get with ...
0
votes
1answer
585 views

speed of FDE with SSD

Anyone have any opinions on using solid state drives with full disk encryption (software-based), such as BitLocker? Not looking for benchmarks so much as personal experiences people have had, in ...
3
votes
2answers
2k views

Why would anyone want to put DB log on a SSD?

I keep hearing about people who want to get SSD for their databases. But instead of putting their tables on SSD, quite often people want to put their DB log on SSD while leaving their tables on ...
3
votes
2answers
2k views

Advices for filesystem choice and tuning on SSD?

What is your favourite filesystem on SSD disks, and why? I'm asking because on my Acer Aspire One with 8 GB SSD with ReiserFS it takes ages to boot after an unclean shutdown, so I'm probably missing ...
5
votes
7answers
2k views

What is faster? A local mechical hard drive or a solid state drive over gigabit ethernet?

SSDs are rather new, so I couldn't find this information on the Internet. Would the performance of a local hard drive connected using SATA2 get out performed by a SSD over gigabit ethernet? In terms ...