I have two servers in two different network subnets, there is a heartbeat between the servers and they automatically select active / standby. the active server will have a floating IP assigned to one ...
Number of NIC card of my desktop = 2. eth0: 10.255.2.191 netmask 255.255.255.0 default gateway 10.255.2.1 broadcast 255.255.255.0 I have bought a switch and want to provide Internet service to ...
I would like to route all traffic to 192.168.1.10 to hardware port 1 on my router and all traffic to 192.168.1.11 to hardware port 2 on my router. The issue here is that I have a network attached ...