Hi everyone I am a newbie so be patient please. I am dealing with the following topology: I have an "ISP ROUTER" connected via fastethernet to a MAIN router. "ISP ROUTER" is also connected via serial ...
I have two servers in two different network subnets, there is a heartbeat between the servers and they automatically select active / standby. the active server will have a floating IP assigned to one ...
I am having an issue with a CentOS 6.3 box. We have two NICs (eth0 and eth1) in the server which each have an ip from a different subnet assigned, let's say eth0:192.168.1.2/24 (gateway 192.168.1.1) ...
Topology: C1 --192.168.111.0/24 -- R1 -- 172.30.0.0/24 -- Switch -- C6 |-- R2 -- 172.30.10.0/23 -- C5 I am a newbie in networking and I have a ...
I'm trying to set up a Dell PowerConnect 5524 switch. I have 5 vlans running on it. Each being also at the same time a seperate subnet. Now I'd like to add all vlans to the ipv4 routing table as route ...
I have to be doing something wrong. the network is setup as below: ST1 eth0 192.168.254.253 255.255.255.0 no gate ST1 eth1 10.10.10.6 255.255.255.252 no gate ST2 ...