Manually configured entries in the routing table.

learn more… | top users | synonyms

1
vote
2answers
3k views

AWS VPN Tunnel going down without traffic

I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time ...
1
vote
2answers
95 views

LAN to LAN VPN connectivity issues

I have a route-based VPN with limited functionality. My computers on site-A can ping one workstation on site-B, it happens to be the only workstation that is not part of the domain that has been ...
0
votes
2answers
170 views

set static default route in a router, in linux

How do I set up a static default route, for a router, in linux? I know that the usual way to go for a static route is to edit the /etc/network/interfaces and add at the proper interfaces the following ...
-1
votes
2answers
165 views

Accessing the internet (or other network) via server with two NICs

I currently have the following setup whereby I need Server #1 to reach the Internet via Server #2 using its second NIC. Is this possible using static routes? If so which route should be added to ...
-1
votes
2answers
209 views

Static route to all ips except a defined set

I was wondering whats the best way to do a static route for all ips except a predefined set. For example, I have 2 networks attached to one workstation. I want all ips except 192.168.0.0/24 to go ...
2
votes
1answer
120 views

Linux route does not persist

I have a network where I have the host A, the host B (both Linux) and the gateway C. I am trying to reach the host Z. The traffic, by default does: A -> C -> Z For some internal needs, I need ...
1
vote
1answer
574 views

Route Split for OS X

Hey guys. I'm attempting to install a static route for a Mac Pro desktop. I'm using Route Split 1.4, which creates a startup script called /etc/routes.sh (The SH script does actually wait for the ...
1
vote
1answer
206 views

Help me better automate changes to our static routes

I have been assigned the task of maintaining and configuring my organization's firewall and gateway routers, and I'm looking for some advice on how to manage the static route table. (As context, ...
0
votes
1answer
9 views

FW changes not implemented?

No local iptables involved FW request should have been opened on port 444 however telnet still times out. request should be going out of the mgt nic eth0 looks like the route table will route my ...
0
votes
1answer
17 views

ipv6 address configuration on serial interfaces

I tried to configure Ipv6 static routing on three routers, I configured ipv6 addresses on all three routers using ipv6 address auto config, The middle router have been configured with different global ...
0
votes
1answer
163 views

Sonic OS - help for a somewhat newbie: restrict access to server

my boss wont hire a network guy, so im trying my best to get this done and help out. i know my way around the sonicwall os well enough to get into trouble, but i am not an expert by any means. here is ...
0
votes
1answer
1k views

Persistent static route stops working after VPN drops and reconnects

I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can ...
0
votes
1answer
175 views

windows server 2003 static route disapper

I have a strange issue here. I have a windows server 2003 R2 which need to manually add some routes. I used route add -p command but found that the routes still be removed automaticly even the servers ...
0
votes
1answer
57 views

Blocking Clients while Forwarding All Traffic

Greetings, How to block clients by masking their subnet mask or changing their gateway information while forwarding any outward traffic from such clients to a specific proxy or server to display some ...
0
votes
1answer
429 views

Cisco PIX 515 doesn't seem to be passing traffic through according to static route

Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having ...
0
votes
1answer
241 views

How to connect to Wi-Fi device through another machine available through VPN?

We are developing app for device named iTach WF2IR, but we doesn't actually have that device, we will get one in 4 weeks or so. Meanwhile, we should make demo for that device in a week. So we decided ...
2
votes
0answers
220 views

Two separate WAN uplinks for two different NAT networks

I have a server running ubuntu 10.04 with four interfaces. eth0 and eth1 have static WAN ip's, and eth2 and eth3 are connected to two separate NAT networks 192.168.0.0/24 and 192.168.1.0/24 ...
1
vote
0answers
102 views

Setting up Infiniband network - wrong route

So I'm trying to set up an Infiniband network alongside my Ethernet network. I have 10 compute nodes and one conductor node. All 11 machines are running CentOS and are plugged in to an Infiniband ...
1
vote
0answers
198 views

Why am I unable to tracert to an IP on my desktop, but I can on my server?

Desktop IP: 10.65.115.145 Server IP: 10.65.107.100 Local Core Switch: 10.65.0.1 Remote Core Switch: 10.64.0.1 Remote Server vLAN (sits in core switch): 10.64.30.1 Remote Server: 10.64.30.10 I can ...
1
vote
0answers
170 views

Guest wireless. HP to Cisco VLANs

I'm having trouble getting guest Internet access working. I have HP V-M200 WAPs and a Cisco RV042G for internet and a HP 1910 switch in the middle. I created a second Wireless Community/SSID on the ...
1
vote
0answers
39 views

Redirecting OpenVPN Server routes towards other VPNs to clients

I have an openVPN Server that share a network in tun mode, the main network that it share is on the class : 192.40.190.0/24 . The config file that I have on the Server is like the following : local ...
0
votes
0answers
33 views

RRAS Routing Shenanigans

I have A RRAS server running on an AWS VPC (10.145/24 network) with address 10.145.0.77. I have a DHCP server/scope set up (10.250/16 network) on a separate Microsoft loopback adapter to offer DHCP ...
0
votes
0answers
62 views

Adding a remote default route gives SIOC[ADD|DEL]RT: No such process

I have searched the whole web for this but it seems no one has had similar problem. I have a local network (no internet) which my router ip is 10.201.32.10 and my gateway is 10.201.32.41 I have a VPS ...
0
votes
0answers
317 views

How to define route on all IP addresses except some subnet

I need to set up the following rules: If IP is in range 192.168.0.0-192.168.0.255 then route iut from gateway 1 (let's say 192.168.2.1) otherwise for all other IP addresses route it through default ...
0
votes
0answers
85 views

Windows Server 2008, Route LAN IP to choice of Gateway

On my windows server i have a WAN and LAN interface. ON my LAN interface the ip is 10.200.0.1/16 and my WAN has an ip of 192.168.20.100 with multiple gateways192.168.20.1, 192.168.30.100, and ...
0
votes
0answers
109 views

static routes not working for me

I have three routers connected like this: Internet ------- (WAN) RouterA (LAN) ------(LAN) RouterB (WAN) ---- (VPN) ---- (WAN) RouterC RouterA: RV042G; LAN: 192.168.100.100 /24 static route for ...
0
votes
0answers
70 views

Blackberry OS 10 ignoring static routes

We are trying to get Blackberry 10 devices (include Z10, Q10, Playbook) to find devices on our corporate wan. The end-user devices are on one subnet, while servers on another. The server subnet is ...