Manually configured entries in the routing table.

learn more… | top users | synonyms

1
vote
2answers
4k views

AWS VPN Tunnel going down without traffic

I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time ...
1
vote
2answers
95 views

LAN to LAN VPN connectivity issues

I have a route-based VPN with limited functionality. My computers on site-A can ping one workstation on site-B, it happens to be the only workstation that is not part of the domain that has been ...
0
votes
2answers
173 views

set static default route in a router, in linux

How do I set up a static default route, for a router, in linux? I know that the usual way to go for a static route is to edit the /etc/network/interfaces and add at the proper interfaces the following ...
-1
votes
2answers
184 views

Accessing the internet (or other network) via server with two NICs

I currently have the following setup whereby I need Server #1 to reach the Internet via Server #2 using its second NIC. Is this possible using static routes? If so which route should be added to ...
-1
votes
2answers
260 views

Static route to all ips except a defined set

I was wondering whats the best way to do a static route for all ips except a predefined set. For example, I have 2 networks attached to one workstation. I want all ips except 192.168.0.0/24 to go ...
2
votes
1answer
121 views

Linux route does not persist

I have a network where I have the host A, the host B (both Linux) and the gateway C. I am trying to reach the host Z. The traffic, by default does: A -> C -> Z For some internal needs, I need ...
1
vote
1answer
603 views

Route Split for OS X

Hey guys. I'm attempting to install a static route for a Mac Pro desktop. I'm using Route Split 1.4, which creates a startup script called /etc/routes.sh (The SH script does actually wait for the ...
1
vote
1answer
215 views

Help me better automate changes to our static routes

I have been assigned the task of maintaining and configuring my organization's firewall and gateway routers, and I'm looking for some advice on how to manage the static route table. (As context, ...
0
votes
1answer
23 views

Freebsd 10 install with non standard gateway route

Some service providers offer dedicated/vps nodes with non standard gateways (ie not in the same subnet). For instance : ip add 10.0.1.1/32 with gateway 56.0.1.1 For this purpose some manual steps ...
0
votes
1answer
29 views

Static routing between LAN, IPSec and VPN

I got the following network setup: LAN: 10.10.2.0/24 -> IPSec -> 10.10.1.0/24 (VPN Server addr: 10.10.1.5/24) VPN: 10.10.3.0/24 IPSec connection is transparent Users between 10.10.1.0/24 and ...
0
votes
1answer
10 views

FW changes not implemented?

No local iptables involved FW request should have been opened on port 444 however telnet still times out. request should be going out of the mgt nic eth0 looks like the route table will route my ...
0
votes
1answer
83 views

ipv6 address configuration on serial interfaces

I tried to configure Ipv6 static routing on three routers, I configured ipv6 addresses on all three routers using ipv6 address auto config, The middle router have been configured with different global ...
0
votes
1answer
227 views

Sonic OS - help for a somewhat newbie: restrict access to server

my boss wont hire a network guy, so im trying my best to get this done and help out. i know my way around the sonicwall os well enough to get into trouble, but i am not an expert by any means. here is ...
0
votes
1answer
1k views

Persistent static route stops working after VPN drops and reconnects

I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can ...
0
votes
1answer
198 views

windows server 2003 static route disapper

I have a strange issue here. I have a windows server 2003 R2 which need to manually add some routes. I used route add -p command but found that the routes still be removed automaticly even the servers ...
0
votes
1answer
58 views

Blocking Clients while Forwarding All Traffic

Greetings, How to block clients by masking their subnet mask or changing their gateway information while forwarding any outward traffic from such clients to a specific proxy or server to display some ...
0
votes
1answer
441 views

Cisco PIX 515 doesn't seem to be passing traffic through according to static route

Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having ...
0
votes
1answer
242 views

How to connect to Wi-Fi device through another machine available through VPN?

We are developing app for device named iTach WF2IR, but we doesn't actually have that device, we will get one in 4 weeks or so. Meanwhile, we should make demo for that device in a week. So we decided ...
3
votes
0answers
36 views

how to configuring secondary IP subnet that is directly routed to WMware ESXI main IP

I have a ESXI 5.1 which comes with a /29 Block IP (EX. 70.60.50.0/29) and the ESXi management address is frist usable addres 70.60.50.2, also i have a secondary /27 IP block (10.20.30.0/27) which is ...
3
votes
0answers
41 views

Multiple Subnet, Same Gateway

I have a nexus3000 switch that has a L3 connection with an uplink switch. (172.18.186.129-130/30) ... In downlink, I have multiple servers and VLANs and I have a range of IP-addresses ...
2
votes
0answers
227 views

Two separate WAN uplinks for two different NAT networks

I have a server running ubuntu 10.04 with four interfaces. eth0 and eth1 have static WAN ip's, and eth2 and eth3 are connected to two separate NAT networks 192.168.0.0/24 and 192.168.1.0/24 ...
1
vote
0answers
10 views

How connect to Router in eNSP from CentOS?

I have eNSP installed on Windows Server 2008 R2. On eNSP there is Router, connected through cloud to this host's machine adapter (VirtualBox or LAN). I need to get connection to this Router from ...
1
vote
0answers
173 views

Setting up Infiniband network - wrong route

So I'm trying to set up an Infiniband network alongside my Ethernet network. I have 10 compute nodes and one conductor node. All 11 machines are running CentOS and are plugged in to an Infiniband ...
1
vote
0answers
327 views

Why am I unable to tracert to an IP on my desktop, but I can on my server?

Desktop IP: 10.65.115.145 Server IP: 10.65.107.100 Local Core Switch: 10.65.0.1 Remote Core Switch: 10.64.0.1 Remote Server vLAN (sits in core switch): 10.64.30.1 Remote Server: 10.64.30.10 I can ...
1
vote
0answers
212 views

Guest wireless. HP to Cisco VLANs

I'm having trouble getting guest Internet access working. I have HP V-M200 WAPs and a Cisco RV042G for internet and a HP 1910 switch in the middle. I created a second Wireless Community/SSID on the ...
1
vote
0answers
42 views

Redirecting OpenVPN Server routes towards other VPNs to clients

I have an openVPN Server that share a network in tun mode, the main network that it share is on the class : 192.40.190.0/24 . The config file that I have on the Server is like the following : local ...
0
votes
0answers
25 views

what is the “ip route” equivalent of “route add -host” in linux?

Specifically, route add -host allows me to specify the host via hostname to add a route to a host, e.g., route add -host www.google.com gw 192.168.1.1 However, I cannot find a way to do this using ...
0
votes
0answers
23 views

Static route to access another IP/SUBNET from PC

Maybe it's a simple concept misunderstand. I'm in a network with ip 172.16.0.xxx (mask 255.255.240.0). How could I configure my PC (Windows 7) with a static route or any other kind of solution so I ...
0
votes
0answers
17 views

Static routes in Azure

I have a router that I have a VPN tunnel built and functioning between an Azure Virtual Network and a local router interface. On the router I have 5 VLANs for various purposes, they are like this. ...
0
votes
0answers
22 views

Trouble with site to site VPN configuration

I have an office network that I would like to bridge to my home network so that any computer on the home network can ping any computer on the office network and vice versa. I apologize if this is ...
0
votes
0answers
21 views

Multiple ssh port-forward to 1 OpenVPN client which connects to 2 OpenVPN servers

I have the following setup: SSH PortForward + OpenVPN Client/Server config My VPS box at myvps.example.com runs 2 openVPN client sessions to 2 physically separate OpenVPN Servers 1&2. SOCKS ...
0
votes
0answers
38 views

Sonicwall NSA240 - Route all traffic from one WAN connection direct to VLAN

We are wanting to setup a Sonicwall NSA 240 as a PPPoE 'gateway' for several internet connections, each of these internet connections need to be put onto a separate VLAN. This will then be sent via ...
0
votes
0answers
76 views

VMware ESXI Behind ASA5506-Xs using Public IP is Not Communicating

Here is the lay of the land. Everything works but I cannot get data flow from ESXI Server or it's VM's I want them using public addresses from behind the router. The Vmware ESXI Hypervisor on a Bare ...
0
votes
0answers
54 views

RRAS Routing Shenanigans

I have A RRAS server running on an AWS VPC (10.145/24 network) with address 10.145.0.77. I have a DHCP server/scope set up (10.250/16 network) on a separate Microsoft loopback adapter to offer DHCP ...
0
votes
0answers
149 views

Adding a remote default route gives SIOC[ADD|DEL]RT: No such process

I have searched the whole web for this but it seems no one has had similar problem. I have a local network (no internet) which my router ip is 10.201.32.10 and my gateway is 10.201.32.41 I have a VPS ...
0
votes
0answers
513 views

How to define route on all IP addresses except some subnet

I need to set up the following rules: If IP is in range 192.168.0.0-192.168.0.255 then route iut from gateway 1 (let's say 192.168.2.1) otherwise for all other IP addresses route it through default ...
0
votes
0answers
113 views

Windows Server 2008, Route LAN IP to choice of Gateway

On my windows server i have a WAN and LAN interface. ON my LAN interface the ip is 10.200.0.1/16 and my WAN has an ip of 192.168.20.100 with multiple gateways192.168.20.1, 192.168.30.100, and ...
0
votes
0answers
150 views

static routes not working for me

I have three routers connected like this: Internet ------- (WAN) RouterA (LAN) ------(LAN) RouterB (WAN) ---- (VPN) ---- (WAN) RouterC RouterA: RV042G; LAN: 192.168.100.100 /24 static route for ...
0
votes
0answers
77 views

Blackberry OS 10 ignoring static routes

We are trying to get Blackberry 10 devices (include Z10, Q10, Playbook) to find devices on our corporate wan. The end-user devices are on one subnet, while servers on another. The server subnet is ...