3
votes
1answer
118 views

How to active HDD leds on HP MDS 600 / HP D6000?

I have a HP D6000 (sometimes called MDS 600) storage array, HP DL380p G8 with an LSI 9207-8e SAS adapter. When I am in the OmniOS (Solaris 10 fork), I can e.g. dd to one of the disks, but I don't see ...
0
votes
1answer
106 views

Dell PowerEdge R710 direct-attached to HP MSA 2040 SAN [on hold]

I have no idea about Direct attached storage; I do not know that it is possible to do. I plan to use HP MSA 2040 storage to direct attached with my dell Power Edge R710 via Fiber Channel. What do i ...
1
vote
0answers
20 views

HP Command View: Could not find authenticator for Security Domain

I have some HP EVA storage arrays. They are monitored via Command View - the HP management product. Of 8 management servers, a grand total of one will not let me log in using 'domain' credentials - ...
-2
votes
2answers
51 views

Store VMs on the same Stick as ESXi

I've a HP N54L Microserver with an ESXi, which runs from the 16GB USB Stick. In vSphere client I can't see any volumes, where I can store my VMs. And I think that ESXi never needs 16 GB to work. Is ...
0
votes
1answer
26 views

Does a HP MDS600 fit in a HP 10636 G2 rack?

In the Quick Installation Giide to the MDS600/D6000 storage server it says IMPORTANT: Some racks other than the HP Rack 10000 Series rack do not allow full access to hard drive bays 29-35 in ...
0
votes
1answer
71 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
2
votes
1answer
27 views

MSA2312i shows duplicate enclosures?

I just installed a redundant controller in my MSA70. This is in use with our old MSA2312i SAN. Now I'm seeing two entries for 'Enclosure 3' (the associated MSA70 disk shelf) in the UI. It appears ...
1
vote
2answers
312 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
1
vote
0answers
43 views

Mapping LUNs to drive slots on a MSA2312i?

I'm working with an older MSA2312i. I really need map the current LUN configuration to associated slots via the SSH so I can make it scriptable. Is there a ready way to do so? I would have thought a ...
0
votes
1answer
202 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
11
votes
4answers
649 views

Disk Speed Performance in a SAN

We are currently looking into buying a SAN, and have some concerns over the speed of disks we are going to put into the array. We would normally have gone for 15k disks over 10k every time, but one of ...
3
votes
1answer
58 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
2
votes
4answers
414 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
0
votes
2answers
845 views

HP MSA2000, how detect faulty disks?

I have an HP MSA2012fc, it happened a few times that my large vdisk (6x 1TB raid 5) get offline, seems some disks are faulty, the event log only shows 2 of the drives had "bad blocks" and some disk ...
1
vote
2answers
51 views

Storage for HP server (sbs2011)

I currently have HP ML350 G6 with 2x300 GB raid disks. Server main purpose is: - Exchange server - Office network (25 users) - File storage Now one problem is that one department has a need of ...
3
votes
3answers
94 views

How to connect SATA disks to copy large amounts of data from them to HP server running CentOS 6

We have an HP Proliant DL320e running CentOS 6. We will get SATA hard disks with data in the formats NTFS, FAT, HFS and HFS+ from which we would like to copy the files to the server (read-only), ...
1
vote
1answer
172 views

HP EVA4400 Vraid5 Virtual Disks Failure

I have a eva4400 with 8 disks six of them in a raid6 group I have 2 vraid5 in this group. I have lost 3 disks. Since I get the administrator post after the disaster happened I have no clue on how ...
10
votes
3answers
637 views

HP storage arrays - multiple channels?

Our SQL server is becoming pretty heavily loaded, and all indications point to the disk channel being the bottleneck. The current HP server has a fairly low-end array card, and we're looking to ...
2
votes
5answers
139 views

Provide iSCSI storage for Virtual Environments through host or directly to guests?

We are planning to place a HP MSA P2000 with two FC/iSCSI controllers in our network. We have two options to provide more storage to Virtual Machines (We are running Hyper-V): A) Add iSCSI targets ...
-5
votes
2answers
383 views

P812 “forgot” RAID6 - can't see disks at boot time in ORCA

We have an MSA60 with 12x4TB non-HP issue Seagate Constellation ES.3 drives connected to a P812/FBWC, on which I created a RAID6 over all of those disks with hpacucli and started to copy data on them. ...
-5
votes
1answer
422 views

ESXi 5.0 - Software RAID 1

Environment: Storage: HP P2000 MSA G3 SAS Array with 24 300GB 10k SAS Disks Two Storage Controllers with redundant SAS connections to each host Hosts: Three HP DL380 G7s with a 10GB SD Card, ...
0
votes
1answer
281 views

P2000 G3 for VMware - one vDisk, Multiple RAID levels?

I have a dual controller P2000 G3 (SAS 6GB) hooked up to 3 ESXi hosts. There are 12x 600GB 15k rpm drives total, and I have set them up in 1 RAID10 vDisk to maximize performance+reliability. The ...
1
vote
1answer
713 views

HP P4000 / Lefthand : how to do a manual failover

We have a P4000 SAN with 2 nodes; we don't have a Failover Manager. Right-clicking a node in the management console does not offer a failover option, the best one seems to be "power off or reboot". ...
0
votes
1answer
344 views

HP ML350 G5 Smart Array E200i battery voltage not low

I have a similar problem like this: HP ML350 G5 Smart Array E200i battery error Gets error message that says it is low voltage power on battery. Has measured voltages of the battery and it is exactly ...
1
vote
1answer
211 views

New RAID1+0 in P2000 storage

I have P2000 SAS storage with RAID6 configured on 8 disks 1TB 7k2rpm. I want to add RAID1+0 with 4 SAS15K 300GB. The question is, does this storage support this setup? Should it work without any ...
0
votes
7answers
297 views

Need to physically move a MSA60 over one row in the rack - do I need to power it down? [duplicate]

Possible Duplicate: How to correctly move a server inside a rack up and down Just wondering what people's thoughts are on moving a MSA60 over one rack. I have plenty of free cable slack, ...
1
vote
1answer
629 views

Reconfigure HP Smart Array RAID 50 with larger drives

We have an HP ML 350 G6 with an HP smartArray 410i controller. Running Ubuntu x64. We previously had 8 146G drives configured as a 820GB raid 50 logical drive. Now I have replaced 4 146GB drives ...
8
votes
2answers
1k views

Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb ...
1
vote
1answer
517 views

How HP D2700 disk enclosure is monitored for alarms via SNMP

We have HP D2700 disk enclosure and we would like to monitor D2700 (connected to HP Proliant DL360G8) for alarms.I have following questions regarding this. What are the options available for ...
4
votes
3answers
1k views

Sparing level on HP EVA 4000

One of the disks of our EVA4000 died today. This diskgroup (all volumes vraid5 with sparing level 1 and almost no space left for more volumes, 1TiB drives) is being rebuilt with "spare space" right ...
-2
votes
2answers
945 views

HP MSA60 complains that new drives are faulty

We got some replacement drives from HP PN 454273-001 1TB 7.2k drives. We put them into the msa. It completes rebuild but when we run the hp insight diagnostics tests. It comes back as read write error ...
0
votes
2answers
265 views

HP SAS HDD in an EMC VNX storage?

Would it be possible to use HP SAS 6G DP 300GB 10K SFF drives in an EMC VNX 5100 storage unit, which currently holds EMC 10K SFF drives (these are really Seagate Savvio 10K.5 SFF drives). Generally, ...
7
votes
5answers
664 views

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I ...
0
votes
2answers
3k views

HP ACU shows parity initialization failed on Smart Array controller

I put in a new drive due to a hard drive failure. When the rebuild got to 100%, the controller fails and I need to reboot the server to bring it online. I had to do this about three times and it ...
0
votes
2answers
973 views

How to check CPU temperature on a HP P2000?

I have an HP StorageWorks MSA Storage P2000 G3 SAS array. show sensor-status gives something like # show sensor-status Sensor Name Value Status ...
-1
votes
2answers
278 views

/var/log/messages sdb error messages. HP MSA50

I have a HP machine running Debian squeeze/sid. In the /var/log/messages log file, I have the following errors... As well, when doing intense file transfer. Let's say... at backup time... After a ...
1
vote
1answer
144 views

ML350 Using both p800 and e200i

I have an ML350 G5 with a P800 and the integrated e200i. I'm using the P800 to service the main drive cage with 6 SAS drives in RAID 5. However, I would love to also convert some of the unused 5.25" ...
2
votes
1answer
763 views

HP MDS 600 compatibility questions

I've bought a used HP MDS 600 to use as JBOD to a ZFS filesystem. Originally I just assumed that it was a pretty 'dumb' box and I'd be able to use a SAS card like the 16-port LSI one, and most any ...
3
votes
1answer
707 views

DL180 G6 12 bay backplane connections

I have an HP DL180 G6 12 bay server with a P212 Raid card. I can not open the server to see inside but I would like to know what connections the backplane has. Right now it has 6 1TB hdd attached. ...
0
votes
1answer
50 views

Longevity of Tape versus Disk

I read something in a Oracle Archiving book, about longevity of Tape Versus Disk, i quote: "Longevity. No matter how you store your data, eventually it has to be moved either due to obsolescence ...
1
vote
2answers
620 views

HP Proliant ML150 G3 physical drive size limit

Apologies if this is a rather silly question, but I'm not very savvy when it comes to interpreting server documentation. The documentation ...
0
votes
2answers
291 views

hp sb40c and hp bl460c storage

I have an HP ProLiant BL460c partnered with an HP SB40c blade server. The storage controller for the BL460c is HP Smart Array E200 while the SB40c's controller is P400. In my configuration, the ...
8
votes
2answers
3k views

CentOS 6 doing lots more IO than CentOS 5

I'm benchmarking an application on two identical servers, one is Centos 5.8 and the other is Centos 6.2. My application is running much slower (50% or less) on the Centos 6.2 machine. In attempting ...
1
vote
1answer
2k views

HP ProLiant DL380 G4 RAID conversion?

Proliant DL380-G4 with the onboard SmartArray 6i controller. Raid 1+0 set consisting of 2x 72 G and 2x 300 G disks (the bigger disks got added later). Effective capacity about 140 GB and, of course, ...
4
votes
2answers
740 views

6 Disk Raid 1+0

I have an HP Smart Array P400i raid controller, with 6 disks, working in a RAID 1+0. This is what it looks like: Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, ...
1
vote
3answers
2k views

How do you take a physical drive offline using HP P410i RAID card

How do you take a physical drive offline using HP P410i RAID card ? Specifically in a RAID1 array I want to use hpacucli tool to take a physical drive offline then online to test if RAID1 array ...
3
votes
3answers
236 views

HP SAS hdd in non-HP server

I wonder if I could re-use some HP SAS drive in a non-HP server. Description: 146GB 2.5" Serial Attached SCSI (SAS) SFF 3G Single Port Hot-Plug 10K HDD Option Part# 431958-B21 Spare Part# 432320-001 ...
1
vote
2answers
2k views

HP P212 hangs on Initializing

I'm in trouble... Server: HP Microserver N36L Storage: HP P212/256 with BBWC Drives: 4 WD 2 Tb While expanding the RAID 5 array from 3 to 4 drives, the server rebooted itself. Expansion was at 76%. ...
1
vote
3answers
898 views

Strategy to optimize raid cache

HP SmartArray have "Accelerator Ratio: XX% Read / YY% Write", that configures how much cache ram dedicated for read, and how much for write. Is there way to find best proportion on alive server in ...
3
votes
1answer
4k views

RAID5 on SmartArray P410i online resize

I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't ...