I have traffic shaping with tc and htb in place and everything works fine for IPv4. Now I want to limit the bandwidth for incoming IPv6 ssh/sftp traffic to some reasonable amount, so it doesn't ...
I am responsible for a Linux-based (it runs Debian) branch office router that takes a single high-speed Internet connection (eth2) and turns it into about 20 internal networks, each with a seperate ...
We have some applications which hog network traffic on one of our servers (Windows 7) at the expense of the other (more important) applications. Is there an easy way to limit the bandwidth usage of ...
I have an interent connection with the speed of 4000k bits up and down. I want to do port based traffic shaping on a ubuntu machine, which acts as router. eth0 is the WAN interface. This is how I ...
I am testing squid 3.0 on a ubuntu amd64 box. I am facing a problem with the delay pool classes when I set the delay_access parameters with multiple ACLs. Have been going through the squid wiki and ...
I have a need to throttle the bandwidth usage, similar to how some ISPs do it, so that after a couple of seconds, it throttles down the speed.
I have a Linux machine running as a bridge simulating various network conditions. I use tc for this. Introducing delays or packet loss is quite simple but I got into trouble trying to configure ...