Virtualization is a group of software technologies that allow abstraction between layers of a system. This allows separation between the logical layers of the system, providing isolation, flexibility, and/or the ability to run more than one at a time. This differs from most traditional systems where ...

learn more… | top users | synonyms (2)

1
vote
1answer
338 views

iptables packetfilter on virtual bridge

I'd like to filter packets passing through a virtual bridge on a Fedora Linux machine. I've enabled the following sysctl options as described in multiple guides: net.bridge.bridge-nf-call-ip6tables = ...
1
vote
1answer
290 views

Cloudmin/Xen Problem with Internet Speed limit

I have Cloudmin setup on a CentOS 64 bit server and I have several virtual machines running on it using Xen. When I try to change the 'Maximum network speed' in Cloudmin from Unlimited to anything ...
1
vote
1answer
477 views

Shared storage for VMs without dedicated storage server

On a legacy project I've got 4 physical machines (servers, PM's) where each server has access to the SAN and fixed-space by it's own two devices (via device-mapper multipath). The local disks of the ...
1
vote
1answer
462 views

VmWare / Citrix Xen type environment vs Ubuntu Cloud / Amazon EC2 type environment

A bit of background. We run a small in house data center: about 20 virtualized servers (Debian Lenny, Windows 2003, Windows xp and Windows 7 machines), in a Citrix Xen pool running on 3 host servers ...
1
vote
1answer
146 views

Virtualization queries

I am virtualization newbie. Please advise on these questions. Please note using a commercial VM software like Citrix or VMware is not a choice for me. I have at my disposal couple 2x 4 core servers ...
1
vote
1answer
103 views

Verify server performance

I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent ...
1
vote
1answer
389 views

Windows XP Mode won't login without changing network settings

I have a Windows 7 x64 Enterprise system. I've installed Windows XP Mode, Windows Virtual PC, and the update. Everything was running fine for a time, nice integration and all that. I don't run the ...
1
vote
1answer
547 views

nginx howto correct the path from a back-end server redirect response under a virtual directory

The following was my deployed servers: client ------ nginx proxy(example.com) ------ back-end server(192.168.1.20) The nginx proxy's external URL was configured under a virtual directory ...
0
votes
1answer
17 views

NAT forwarding (whole IP) working only on some ports

Since my hoster doesn't allow briged setups I had to go for a NAT solution to run my CentOS VM on an additional IP and my host machine on the primary IP. Now, I've got a problem since for ports 22, ...
0
votes
1answer
35 views

ubuntu kvm disk io slowdown after some tyme

Host system: Ubuntu Server x64 12.04 mdadm raid 1 (/dev/sda /dev/sdb) no lvm dd bs=1M count=256 if=/dev/zero of=filename conv=fdatasync avarage ~ 40 MB/s NCQ on disks is disabled WriteCache is ...
0
votes
1answer
34 views

Juniper SRX210 routing vlans

Ive got a Juniper SRX210 only using 2 ports Model: srx210he-poe JUNOS Software Release [11.4R2.14] WAN ge-0/0/0 up up ge-0/0/0.0 up up inet ...
0
votes
1answer
17 views

How to add Virtual Hosting to two existing VM servers

I'm trying to run two Ubuntu VM's on one machine, each running a separate LAMP stack serving different websites. Is it possible to use Virtual Hosting to accomplish this? I've read that it's ...
0
votes
1answer
24 views

Can I install Backup Exec in a guest

We want to have a single physical machine as host, having several guests. One of the backup solutions we're considering is using Backup Exec to backup to external disks or tape, having Backup Exec ...
0
votes
1answer
185 views

How can I configure multiple tap interfaces for a single KVM virtual machine

I am trying to setup a VM using Linux KVM for a F5 BIG-IP VE deployment (used in a lab) ...
0
votes
1answer
47 views

Cannot Properly Manage Server 2012 r2 Hyper V Core

http://i.stack.imgur.com/hYak5.jpg I have just installed the Hyper V 2012 r2 Core system. I was able to name it, add it to the domain, even RDP into it (which is just worthless). However, When I ...
0
votes
1answer
227 views

Running Vagrant/libvirt: trying to establish public/private networks

I'm running Vagrant 1.7 (from their official 1.7 packages) on Ubuntu 14.04 LTS and I'm trying to provision several private VMs and one public one. My Ansible provisioning scripts change all the ...
0
votes
1answer
100 views

How to create a single image of Windows Server 2008 R2 to use on a Azure Virtual machine

I am trying to migrate from a colocation where I own the servers to Azure. I have been following this article: ...
0
votes
1answer
78 views

ls SCVMM 2008 R2 supported on Server 2012?

We currently have SCVMM 2008 R2 on a Server 2008 R2 PC. We are looking to upgrade the server to Server 2012 (possibly R2). Is Server 2012/Server 2012 R2 a supported or compatible operating system to ...
0
votes
1answer
37 views

auto assign ip address to httpd.conf

I am building a cluster of servers in which new virtual machines will spin up as resources are needed. Is it possible in the apache config file to use a variable that will detect the servers ip ...
0
votes
1answer
440 views

Proxmox VE: Multiple shared public IPs with NAT configuration

I have a Proxmox VE (v3.3 @ Debian 7 Wheezy) and got 3 public IPs routed to that server. It is my aim to have multiple VMs sharing those IPs using a NAT configuration so that I can forward single ...
0
votes
1answer
922 views

Debian Jessie Qemu KVM GPU Passthrough to Windows Virtual Machine guest Virt-Manager error Bus PCI not found

I'm having problems with Virt-Manager not wanting to boot a VM and giving error: Error starting domain: internal error: process exited while connecting to monitor: char device redirected to ...
0
votes
1answer
28 views

Removing snapshot after removing guest hard disc

I have a server with ESXi 5.5 installed. I recently wanted to add a new hard disk to one of the guests. After adding the virtual disk to it, I took a snapshot just to be sure that nothing would go ...
0
votes
1answer
294 views

Slow Performance on Exported Hyper-V VMs

I have an Windows Server 2012 environment with Hyper-V virtualization. My VMs were running very well but my machine was running low on disk space. After buying an new HDD and installing it on my ...
0
votes
1answer
90 views

Image Sharing File Server on Windows Storage Spaces.

I am working on Windows Storage Spaces File server, but I ran into this strange situation when transfer to client systems is aroung 300kb/s. There are two SS servers on the network - the other one is ...
0
votes
1answer
426 views

Apache virtualhosts not going

I have an AWS virtual server, with ubuntu 14.04 and apache 2.4.7. I have two domain names (let's say name1.com and name2.com), and I wanted both them to point to the IP of the server, and that apache ...
0
votes
1answer
380 views

Disable VMware BIOS Legacy Diskette

In the main tab of VMware BIOS setup utility there is an option to disable "Legacy Diskette A" (and B). Which is the option to get this by means of the vmx configuration files? I tried: ...
0
votes
1answer
163 views

VirtualMachine is not available from bridged interface outside the local network

I'm unable to connect to any service running in my VirtualMachine from Outside my local network. My VM has the following configuration: eth0 - Host Only Network eth1 - Bridged Network (Therefore ...
0
votes
1answer
454 views

KVM : VMs need several restarts to boot (on 2 different hosts)

I'm using a KVM hypervisor on a Ubuntu Server 12.04 server. My virtual machine's virtual disks are LVM volumes, formatted as ext3. The guest OSes are all Ubuntu 12.04 and 14.04 server. Everything ...
0
votes
1answer
470 views

CARP Virtual IP does not ping in virtualized environment

We have three physical machines with SmartOS on them in a LAN. Two of them, 10.40.0.30 and 10.40.0.240 are hypervisors with two pfSense-based virtualized gateways on them. These gateways have ...
0
votes
1answer
96 views

Getting VMware Port-ID using commandline

Is there a way to directly gather the vmware port-id using commandline? I'm trying to make monitoring switchports easy through esxcli but in order to get port statistics I require the portid of a VM ...
0
votes
1answer
156 views

Intel processor has 8 threads but only showing 4 in task manager

I have a server with an Intel Xeon E3-1240 3.3Ghz processor. According to intel's website this processor has 4 cores and 8 threads, however in Windows Task Manager there are only 4 showing. The ...
0
votes
1answer
2k views

Can I use XenServer GPU Pass-Through without XenDesktop?

XenServer documentation only covers using GPU Pass-Through ("vGPU") to run XenDesktop's "HDX 3D Pro Graphics." XenServer GPU Pass-Through cannot be used with the XenCenter VNC console and it does not ...
0
votes
1answer
105 views

Linux Containers (LXC) : lx-execute and networking

I have a question about LXC Containers. I have some containers, if I lxc-start them, they come up with networking fine, but I want to just be able to run commands against them using lxc-execute, ...
0
votes
1answer
586 views

Configure GRUB on XEN VPS

I have a xen VPS with debian 7 x86_64 installed on it. The operating system comes with GRUB2 installed on it. The problem is that while runnnig apt-get update apt-get upgrade -y GRUB says The GRUB ...
0
votes
1answer
331 views

Hyper-V How to define “auto revert” to a snapshot after each reboot

I'm using the built-in Hyper-V that comes with Windows Server 2012 R2 and I'm looking for the option that lets me to set "auto revert" (or "auto apply") to a specific snapshot after the machine is ...
0
votes
1answer
719 views

Can't RDP to VM over Azure Point to Site VPN

I set up a point to site VPN from my computer to my vnet in Azure. Everything connects normally and even on the portal it says the tunnel is established. When connected to the VPN, I am still unable ...
0
votes
1answer
88 views

How to benchmark a whole storage infrastructure

I'm a 100% sure that I'm not the first one to consider benchmarking a whole infrastructure, but yet I haven't found any relevant information on how to face this challenge. As I guess we all know what ...
0
votes
1answer
41 views

Virtual Routing for root virtual machines on 1 IP

I wan't to install several (around 10) virtual machines on our server. We have 1 public IP-address assigned to it. I wan't to use virtualbox (and phpvirtualbox for administration). I have no control ...
0
votes
1answer
216 views

how to monitor bandwidth consumption of a virtual machine

I have a windows server and four virtual machines running on it. Different applications are running on each of those virtual machines. So without logging into each of the virtual machines separately ...
0
votes
1answer
132 views

What solutions are available for having a client boot straight into a Windows VDI?

I don't have much experience with enterprise level Virtual Desktop management (yet). I'm looking for a Microsoft solution if one exists, but all valid answers would be appreciated. The scenario is ...
0
votes
1answer
143 views

OpenVZ: Custom settings on container startup / Choosing the right MySQL Server

What I have: Two servers running Wheezy/OpenVZ with One MySQL container on each host master/master replicated (mysql1/mysql2) Replicated DNS on each host (dns1/dns2) different web-containers on ...
0
votes
1answer
174 views

XEN configuration on dedicated server at 1&1

I am just trying to install first time VPS on my dedicated server from 1&1 (12HT CPU, 30 GB RAM). The dom0 is using DHCP to get it's network configuration with ip 87.106.73.113 on eth0. I have ...
0
votes
1answer
104 views

Keep guest time after shutdown using KVM/libvirt

I use KVM/libvirt based virtualization. Some of vm guests have set date far in future (2-3 years, different month, day, etc) After each guest shutdown down, the date is being set to host date ...
0
votes
1answer
109 views

Finding out the location order of tap interfaces in KVM VM (Libvirt)

I have inserted 8 tap interfaces in a Cisco Libvirt xml file that will create a guestmachine running Ciscio iOs image: <interface type="ethernet"> <start mode="onboot" /> <target ...
0
votes
1answer
80 views

Consequences of exposing VM storage on same subnet as VM's and hypervisor

I recently purchased a RAID array to store my VM's and segregate the storage from the host machine. Since my needs are pretty simple I've configured the VM's to bridge with the host network (I think ...
0
votes
1answer
1k views

XenCenter cannot connect to XenServer

I am trying to establish a connection using XenCenter 6.0 to a server where XenServer 6.0 is installed, but it gives me the following error message: Unable to connect to server '192.xxx.xxx.xxx'. ...
0
votes
1answer
102 views

Xen dom0 and domu ifconfig returns different stats

I expected that when I use ifconfig command to display network traffic RX and TX values both for dom0 and domu machine, there are differences. I run once ping inside the domu. domu ifconfig command ...
0
votes
1answer
54 views

A complete newbie installing virtual switch on WinServer 2008 R2 with Hyper-V

As somewhat of a novice server administrator, I have a question about Hyper-V, WinServer 2008, Virtual Switches and multiple IPs. I have a dedicated box which I access through RDP (also KVMoverIP ...
0
votes
1answer
152 views

Virtual Firewall vs Physical Firewall

i was reading this discussion: Is there danger to virtualizing a router? I'm in charge of mantaining several firewall installed in different SMB organization 10-100 user. We're installing Endian or ...
0
votes
1answer
168 views

Split management network from data in Xen Server

I'm working on configuring our existing pool of four hypervisors running XenServer 6.1 to use a separate management network. Currently the setup is a single link with a public address over which all ...