Group of hosts with a common set of requirements connected as if on the same broadcast domain despite physical location

learn more… | top users | synonyms (1)

0
votes
1answer
36 views

different Native vlans on the ends of trunk link

http://www.techexams.net/forums/ccnp/53867-different-native-vlans-ends-trunk-link.html so i read this, but i still can not get traffic between two ends of a trunk link, each with a different native ...
0
votes
0answers
45 views

Windows server 2008 and Osx Mavericks mix two networks

First of all sorry for my English: I have two switch with 2 separates vlans connected. The first Vlan in the range 192.168.26.x gateway: 192.168.26.254 The second Vlan in the range 192.168.50.x ...
0
votes
2answers
89 views

Questions regarding my network plan

I'm developing an IT infrastructure room for testing purposes. The overall aim is to create a network, which if fully disconnected from the productive environment and several people can come and ...
2
votes
1answer
230 views

Inter-VLAN routing: multiple VLANs, only one should be accessible to all. Makes sense?

I am trying to segment our company's network. My main goal is to have many small broadcast domains instead of a gigantic one, so I thought of assigning one VLAN per department. However, we have many ...
0
votes
1answer
227 views

How to get 192.168.3.2 to successfully ping 192.168.2.3

With the layout described below, the following is true: either router can ping any host on either subnet 192.168.2.0/25 hosts can ping (and ssh to) 192.168.3.0/24 hosts but 192.168.3.0/24 hosts ...
1
vote
1answer
162 views

Scanning tagged traffic over bridge through iptables

I am working on bridge on linux box using brctl. Now I have to scan and monitor bridge traffic through iptables. So for the same I changed: net.bridge.bridge-nf-call-iptables = 0 to ...
3
votes
3answers
604 views

What do switches do to tagged and untagged VLAN packets?

Let's say we have a 4-port switch that is VLAN capable. 1 2 3 4 Port 1 is TAGGED to VLAN10` and `UNTAGGED to Default_VLAN(1) Port 2 is UNTAGGED to VLAN10 Port 3 is UNTAGGED to ...
-1
votes
1answer
2k views

How to set up 2 separate VLANs on one switch (HP v1910-48G switch)

I need some advice on how to set up 2 VLANs (on one switch, I have HP v1910-48G switch) that separate broadcast domain and also share a single internet connection. The two Vlans must remain separate, ...
1
vote
1answer
47 views

VLAN, possible to do this?

I have a Cisco RV110W small buisiness router. Here is a demo of what the administration interface/options: https://www.cisco.com/web/sbtg/gui_mockups/RV110W/default.asp.htm I have 3 devices connected ...
2
votes
0answers
43 views

Juniper SSG-5 different vlans authentication

In my network infrastructur I have 2 companies right now. Every company has it own vlan. For example: Company A 192.168.100.0/24 Company B 192.168.101.0/24 I want to use a shared vlan for all ...
0
votes
1answer
163 views

Creating VLANs between network namespaces [closed]

I want to implement the topology shown in the figure below using network namespaces (ns1 to ns4). ...
2
votes
1answer
98 views

Questions about bridging VLANs

If, across the same building, I have two physically separate networks to connect devices together via simple switches, my understanding is that I could save myself some hardware-complexity if I were ...
1
vote
1answer
200 views

Cross-VLAN sharing and auto-discovery of selective resources

I have a network with several VLANs that each contain resources or clients with different access rights. For simplicity, let's say I have 3 VLANs: ID 10: Contains privileged clients and private ...
0
votes
2answers
94 views

KVM Network configuration + VLAN trunck

I am trying to set up a KVM Based solution, I am having trouble configuring the NICs for the VMs from a bridge based on a VLAN interface. My config below : ETH0 : KVM Host Management : ...
2
votes
1answer
2k views

Configuring VLANs on HP 1910 switch

I understand how VLANs work, but am not quite sure what the various settings in my HP switch actually do. I have an HP 1910 switch, and I'm using the web interface to configure it (personally I'd ...
0
votes
3answers
142 views

Centos multiple NICs routing issue

I am having trouble setting up permenant routes for my network interfaces, below my config : ETH0 : 172.23.137.27 Netmask /25 - 255.255.255.128 Gateway – 192.168.126.126 ETH1 : Trunk VLAN - ...
1
vote
0answers
87 views

Routing between L2 isolated ports

I am to deploy some managed switches for FTTB/FTTH and preparing configuration to introduce isolation between customers (by disabling L2 forwarding between client ports or using private VLANs). ...
1
vote
1answer
49 views

How can we better pinpoint instability issues on our network?

We have a medium-sized network of 600 users, all on Cisco switches. Where the users are allowed to plug in routers, etc. on the endpoints, so that they can use wireless and/or multiple devices in ...
0
votes
1answer
166 views

VTP does not update on client switch

I recently replaced the switch that was functioning as the VLAN server for the rest of the network. Since the replacement however, I have not been able to push any new VLANs to the Client switches. ...
0
votes
1answer
77 views

Cisco IOS, restrict IP addresses per ethernet port #

I am configuring a Cisco 881, and am interested in restricting individual ports on the LAN (FastEthernet 0-3). I would like to be able to limit the IP addresses that someone can use based on which ...
1
vote
1answer
578 views

Unable to make work both private and public ip network on openvz container in Proxmox

I'm using Proxmox 3, it is a fresh installation. For those who know, I'm using OVH Vrack 1.5 (along with a previous Vrack 1.0). My server has two interface eth0 and eth1, I succeeded to configure ...
2
votes
3answers
464 views

VLAN over VPN (ASA 5520)? if not any other options available?

Is it possible to extend the local VLANs to a Remote site connected by IPSEC VPN using ASA 5520 / Cisco 1841 DSL router. can we have many VPN tunnels between the ASAs? (from every VLAN one vpn ...
0
votes
0answers
98 views

openvswitch,push_vlan on the same frame

I have frames coming in from eth0 tagged with a vlan id. I'm trying to load another vlan tag on the same frame so I'll have two vlan headers, then output the frame to eth1. I read ovs-ofctl's manpage ...
1
vote
1answer
162 views

bridge, vlan and internet access. How?

I'm trying to setup a working connection between my local network and the internet. First I setup a bridge (br0, has an IP address where the other interfaces don't) between eth0 (LAN) and eth1 ...
2
votes
3answers
570 views

identifying vlan packets using tcpdump

I'm trying to figure out the vlan tagged packets that my host receives or sends to other hosts. I tried tcpdump -i eth1 vlan 0x0070 But it didnt work. Has anyone tried to view the vlan ...
0
votes
2answers
133 views

How can I route or bridge vlan properly with linux router?

I have a linux router (Centos 6) that I built. It has eth3 and wlan0 bridged together as br0. I have not been utilizing vlans up to this point. I have a wireless AP that is tagged vlan 42 for a guest ...
1
vote
1answer
222 views

ovirt vdsm vlan - cant create virtual lan only wan port

I installed ovirt 3.3 on fedora 19 on my server. The Server has one ethernet connection, and it is a WAN so I don't have a LAN ip, or DHCP. I set a bridged interface (ovirtmgmt) on this interface ...
0
votes
1answer
307 views

vSphere — isolated network between hosts

How can I isolate traffic between vSphere hosts, for a test environment, while maintaining the same IP address configuration as the current guest OS's? I have two ESXi 5.0 hosts on my LAN. Each hosts ...
0
votes
1answer
92 views

Multiple DHCP servers on a single physical network?

Today i got put on a project to solve a networking project for a friend who rents out multiple office suites. Internet is provided to all suites in the rent cost. The guy who originally set everything ...
1
vote
2answers
136 views

Is VLAN separation required for multiple networks?

I am setting up a Dell 6248 combining separate switches used previously. I am planning the following architecture: VLAN 1 - External traffic (each server's public interface connects to this) VLAN 2 ...
1
vote
1answer
85 views

Is it possible to send different-per-subnet DNSes from the single ISC DHCP server?

The case I want to cover is to send different DNS server for one, isolated VLAN, which purpose is to give internet-only access - for our guests. It has no access to our internal network, so it ...
1
vote
1answer
548 views

New VLAN configuration on Citrix XenServer 6.5

We have an existing xenserver environment I have recently inherited. We have multiple xenserver vlans working that can all talk to each other. I am now trying to set up another network and cannot seem ...
1
vote
1answer
408 views

VMWare vSwitch VLAN IDs and tagged/untagged ports

Similar to this question: What happens when a port is configured as ACCESS and is a part of VLAN 'X' and we get a packet of VLAN 'Y' on that port? Will the switch drop it or it will add a VLAN ...
1
vote
0answers
55 views

Guest wireless. HP to Cisco VLANs

I'm having trouble getting guest Internet access working. I have HP V-M200 WAPs and a Cisco RV042G for internet and a HP 1910 switch in the middle. I created a second Wireless Community/SSID on the ...
3
votes
0answers
64 views

Configuring Container with bridges and vlans (server only?)

I have two groups of lxc contianers on a server and want to isolate their network traffic for security reasons. I will be using port forwarding so the containers much each have separate IP's. I know I ...
0
votes
0answers
61 views

VLAN configuration on Ubuntu

I need some help with vlans because I'm a bit confused. I setup a transparent vlan over a topology like the one bellow: Host_1 (vlan 11) <---> [switch] <--(vlan 11)--> [switch] <---> Host_2 ...
-1
votes
2answers
64 views

Connect four Modems having same IP with a single Ethernet Switch [closed]

I have a scenario where i have 4 modems connected to a switch. all four modems have IP address 192.168.0.1(default). i want to connect all of these four modems with a single switch in a way that i ...
0
votes
1answer
83 views

PC in two VLANs with one interface ping issue

im having a problem with a netkit lab that im wornking on. I have one switcher and 3 PCS (PC1, PC2 and PC3). PC1 and PC3 must be on VLAN 100(100.1.0.x/24), PC2 and PC3 must be on VLAN 200 ...
2
votes
2answers
686 views

Is there a way to pass VLAN tagged frames through managed switch?

I currently have a managed switch (DGS-3120-24SC) configured for private VLANs (secondary and primary port groups). Secondary ports are isolated from each other and forwarding is not possible between ...
-1
votes
1answer
73 views

Transfer VLAN tagged packets over WLAN? [closed]

I have the following composition of devices: [selfmade router] - ethernet - [WLAN router 1] ----- wlan ------ [WLAN router 2] WLAN router 2 has 5 ethernet ports, each as an own VLAN, so 5 VLANs. I ...
1
vote
1answer
230 views

HP Procurve 2610 vlan routing

Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all ...
2
votes
1answer
106 views

What could be wrong with my VLAN?

I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access ...
2
votes
1answer
137 views

Setting up NLB in a VLAN

I have a network layout like this (ESXi hosts): Internal Network + +-----------------+ ...
1
vote
1answer
126 views

cisco 2851 router: can't view switch ports

I want to setup vlans on a 2851, but I'm not sure how to access the switch ports. I can access or view them. Is there something I have to enable? I have some devices plugged into the switch ports and ...
0
votes
1answer
44 views

Changing from router DHCP to Server DHCP [closed]

I want to setup a Linux DHCP server instead of a router based DHCP. I'm guessing that I will need to turn off the router DHCP, but keep the router as the gateway. I think that the BCAST DHCP requests ...
1
vote
2answers
160 views

Setting up VOIP system on separate VLAN / Server on default VLAN

First off, I am not a network engineer so apologies if I get terminology messed up, i realize accuracy is important here. Currently, we have a small(ish) network with around 40 devices and 20 IP ...
1
vote
1answer
101 views

What determines which of a DHCP Relay Agent's IP addresses are attached to relayed requests?

I have a vlan with multiple IPs set, and a helper-address: vlan 15 ip helper-address 172.17.1.11 ip address 172.17.5.254 255.255.255.0 ip address 172.17.51.254 255.255.254.0 All relayed requests ...
3
votes
1answer
3k views

VLAN tags not shown in packet capture (Linux) via tcpdump

I am adding a tagged VLAN onto eth0: #ip link add link eth0 name eth0.20 type vlan id 20 This results in: #ip link 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc ...
1
vote
1answer
71 views

Name resolving issue

I have a problem with my VoIP server name not resolving by voip.companyname.com If I try to ping it from windows 7/w2k8 the request is not coming back unless I type FQDN which would by ...
1
vote
1answer
1k views

Multiple, different VLAN trunks to KVM guests (Linux)

I've hit a roadblock of sorts with an architectural challenge. I've got a server running KVM - which will feature a number of guests, some running virtualised firewalls and others, just plain web ...