Group of hosts with a common set of requirements connected as if on the same broadcast domain despite physical location

learn more… | top users | synonyms (1)

6
votes
0answers
6k views

OpenWrt Configuring Tagged and Untagged VLAN on the Same Port

I have installed OpenWrt on a MikroTik Routerboard RB750UP (AR7240 CPU with AR9330 built in switch). I have included additional details below, but my question is: How do I configure an untagged and ...
4
votes
0answers
181 views

HP Procurve 2920 VLANs with DHCP cannot ping

I have problem setting up working VLANs and DHCP server on HP Procurve 2920. My problem is that I cannot even ping computers between VLANs with static ip addresees. winXP pc on VLAN101 with ...
3
votes
0answers
80 views

Configuring Container with bridges and vlans (server only?)

I have two groups of lxc contianers on a server and want to isolate their network traffic for security reasons. I will be using port forwarding so the containers much each have separate IP's. I know I ...
2
votes
0answers
60 views

Juniper SSG-5 different vlans authentication

In my network infrastructur I have 2 companies right now. Every company has it own vlan. For example: Company A 192.168.100.0/24 Company B 192.168.101.0/24 I want to use a shared vlan for all ...
2
votes
0answers
595 views

Configure vlan on Netgear switch via SNMP

I am trying to configure vlans on a netgear GS752TSX from the Linux command line with netsnmp. I have created vlan 99 on the web interface now want to control the pvid settings, egress and tagging. I ...
2
votes
0answers
1k views

Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have ...
2
votes
0answers
127 views

dsl router for bridging two lans

I have two office locations that each have DSL service. I have the routers set up so that the two subnets, 10.0.1.x and 10.0.2.x, correctly keep data on each subnet and or pass across to the other ...
1
vote
0answers
29 views

CoreOS bare-metal vlan networking

I need to write a CoreOS Cloud Config file in which I need to setup networking. But i have a problem because I have a bit weird environment. What I'm trying to accomplish; I have a Sophos UTM thats ...
1
vote
0answers
20 views

Can pvlan-trunk Ports Carry normal vlans too on Juniper EX8208?

I'm trying to implement pvlan on Juniper EX8208 which will span across multiple switches (to a Cisco nexus 7000 Series) and need to know if the Inter-Switch-Link Port with "pvlan-trunk" will allow ...
1
vote
0answers
19 views

How does Juniper vlan.0 work with policies?

I'm trying to understand vlan.0 and Juniper policies. Referring to here: http://kb.juniper.net/InfoCenter/index?page=content&id=KB16667 According to the link above, it seems that if I use ...
1
vote
0answers
46 views

Separate L2TP/IPsec VPNs with dynamic VLAN assignment

I am working on a Linux (Debian 7) VPN concentrator for different kinds of remote access. One of the offered protocols is L2TP/IPsec because of the client availability. I am using xl2tpd which in turn ...
1
vote
0answers
57 views

HP 5120 vlan not working

So I have this odd issue with our HP 5120 switches. The VLANs will not pass traffic unless a interface with a IP is assigned to the VLAN. Problem is there is a limit of 8 VLAN interfaces that are ...
1
vote
0answers
49 views

Inter VLAN Routing

I have VLAN 1 and VLAN 2 setup on HP ProCurve Switch, each linked to a different scope on DHCP server. VLAN1 = 10.220.0.0/23 VLAN2 = 10.210.0.0/21 I can't ping VLAN1 devices from VLAN2 and vice ...
1
vote
0answers
166 views

DRAYTEK - VLANs with VLAN tagging switches / router

Our company uses Draytek routers (various models, slowly upgrading to 2860n at each site). We have recently purchased a new site, and want to split the network up into separate VLANs, so as to ...
1
vote
0answers
98 views

Routing between L2 isolated ports

I am to deploy some managed switches for FTTB/FTTH and preparing configuration to introduce isolation between customers (by disabling L2 forwarding between client ports or using private VLANs). ...
1
vote
0answers
100 views

Guest wireless. HP to Cisco VLANs

I'm having trouble getting guest Internet access working. I have HP V-M200 WAPs and a Cisco RV042G for internet and a HP 1910 switch in the middle. I created a second Wireless Community/SSID on the ...
1
vote
0answers
108 views

Linux as gateway with VLANs failing for local network

We have a private VLAN being routed out from a host connected both to it and to our public network. Hosts on the private VLAN have the private IP address of the gateway host (10.2.2.82) set as their ...
1
vote
0answers
278 views

Cisco vlan entry missing in vlan.dat, but appears in running-config

One of our vlan's (ID: 104) stopped working suddenly and computers on that vlan failed when trying to obtain a dhcp ip address. On the Cisco switch if we do show vlan, this command is supposed to ...
1
vote
0answers
2k views

OpenWrt on TL-WR1043ND - VLAN to VLAN communication

I have this network configuration at home: 3G Wifi router - for access to internet, 192.168.1.0 subnet Router TP-Link TL-WR1043ND - OpenWRT (12.09), 192.168.2.0 subnet, connected wirelessly via ...
1
vote
0answers
530 views

debian KVM - network bonding fails with vlan and bridge

i have a Debian 6 system configured with 2 NICs these NICs are used on a bond (bond0) which is used by bridge that require to use VLAN. i can get connection between guests running on VLAN10 but it ...
1
vote
0answers
456 views

Ghost “vlan 0” tags added to ethernet frames in CentOS guest under OpenStack

I'm trying to debug an issue involving a KVM virtual machine instance where the instance doesn't respond to network requests when the source is on another physical machine, which is on the same subnet ...
1
vote
0answers
64 views

VLANS and Public/Private Traffic

I may reveal some ignorance with this question, but I am really confused. We have 3 static IPs and one gateway/modem with my organization. The gateway/modem is located in a remote area of our ...
1
vote
0answers
661 views

PFSense VLAN's - clients cant access devices on a defined VLAN

I'm having an issue setting up pfSense with VLAN's, basically, the pfSense boxes can ping the devices on the tagged vlan, but clients routing through pfSense cannot. There are two Cisco SG500 ...
1
vote
0answers
203 views

How to prevent partial crash during VLAN configuration on a HP ProCurve 3500

As you can see from my question, I have a VLAN configuration problem with a ProCurve 3500. The goal is to remove a VLAN from the existing configuration, however when I use the WEB UI to do this, I ...
1
vote
0answers
1k views

Is it possible to mix jumbo frames VLAN and standard mtu VLAN on the same switch port?

If a managed switch and all attached devices both support VLANs and Jumbo Frames, is it possible to mix VLANs with jumbo frames and VLANs with standard frames on the same switch port / ethernet card? ...
1
vote
0answers
479 views

Access All VLANS over XenServer Interface

For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access ...
1
vote
0answers
87 views

Datacenter redundant hosting setup advice

We are moving our servers to a new DC and I am looking for a bit of advice with our new COLO setup. I have some knowledge of networking but I am an enthusiast more than anything so it gets a bit ...
1
vote
0answers
3k views

HP Procurve 2910AL allow traffic from VLAN to VLAN

We are trying to setup so that the switch handel routing and communication between a few vlans. And then have a link network up to the fw. Here is the config: Running configuration: ; J9145A ...
1
vote
0answers
2k views

Cisco 891w multiple VLAN configuration

I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate ...
1
vote
0answers
501 views

Simple VLAN Trunking between 2 switches

I am trying to set up a connection between 2 buildings. In building 1 I have the following: Network 1 192.168.2.0/24 Network 2 192.168.3.0/24 Network 3 192.168.0.0/24 Network 4 ...
1
vote
0answers
154 views

Duplicate packets on network after disconnecting wireless access point on separate VLAN

We have a network with a few switches. One of these is a 3com 4500, where there are many computers connected, a custom linux firewall and a wireless bridge. The port where the wireless bridge and the ...
1
vote
0answers
200 views

Can multiple VLANs be provided with multicast addresses by a single MADCAP server?

Can a single DHCP server provide dynamic multicast addresses for hosts in many VLANs using MADCAP, just like it can provide hosts with unicast addresses via ip-helper? Or from a Cisco perspective, ...
1
vote
0answers
448 views

HP ProCurve & Cisco switches interoperability

I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below ...
1
vote
0answers
157 views

Network Segregation for IaaS/SaaS Environment

I've inherited a Dell M1000e blade chassis and 16 M600 blades that I'm now in the middle of migrating from standalone to clustered. Each is running Server 2008 R2 SP1 and Hyper-V. My issue is I'm ...
1
vote
0answers
469 views

Dell PowerConnect 6224F ACL Not Performing as Expected

What I'm trying to achieve is as follows: Allow full access to the device on 10.58.9.32 (our VoIP server), from anywhere on our network. Allow ICMP to flow in all directions to/from any device. ...
1
vote
0answers
784 views

Max STP instances reached on Cisco 2950 despite not actively using 64

I have a Cisco 5505 switch running CatOS connected to a number of Cisco 2950 switches running IOS. The 5505 switch supports a large number of vlans (I'm guessing 1005), yet the 2950s only support a ...
0
votes
0answers
7 views

Microtik router intervlan routing with NAT

I have setup as below: MTik Router RB450G(ether1) --> (fa0/1) Cisco Switch (fa0/2) --> Maipu Router, Internet Router MTik Router(ether2) --> My PC In fa0/1 , there are two VLANS trunked: VLAN 10, ...
0
votes
0answers
51 views

Cisco ASA 5510 needs “clear arp <Interface>” periodically to reach a single host

ASA 9.0(3) The symptom is that I can ping from the ASA to any other host in that interface's subnet, save one particular host (that host can ping the interface on the ASA however). If I do "clear arp ...
0
votes
0answers
12 views

Cisco 877 Initial Setup - Enable SDM

We purchased a used 877 and installed IOS and reset to factory defaults with a console cable. Now I just need to set it up as right now connecting via ethernet and pinging 10.10.10.1 won't connect (ip ...
0
votes
0answers
17 views

sg300-10 problems with vlan connections

I was hoping someone could give me a pointer on a VLAN setup issue i am having. My Enviroment: Cisco S300-10 Switch (set to L3 Mode) I have uploaded a newb drawing of my switch config in the hope ...
0
votes
0answers
32 views

my iperf connection test client side keeps showing connection refused

I am trying to setup an iperf test but the client side keeps getting connection refused message. Server side: ubuntu@webserver1:~$ iperf -s ...
0
votes
0answers
23 views

Change vlan settings to Yealink phones at once

I have about 90 yealink ip phones. My target is to change vlan settings to all of them massively. For example, when it's going to reboot all of them, I run the following ...
0
votes
0answers
14 views

allow double tagging on vlan interface

I have a single interface eth0 on my machine. I have a linux bridge to which If I add my interface I loose connectivity. So I create a vlan interface and add it to the bridge. All is fine now except ...
0
votes
0answers
97 views

SCVMM 2012 R2, single logical network both on trunk and access port

I've got a rack with a number of servers, both new and old.. The infrastructure we have uses 4 different networks for different purposes (e.g. Internet, AD, SQL and iSCSI) Newer servers have 8 NICs, ...
0
votes
0answers
21 views

Tagged traffic over Checkpoint IPSec

How can I forward tagged traffic over Checkpoint IPSec? Where I can read more info about it? I have Checkpoint R76 and I need to use tagged vlan over IPSec tunnel.
0
votes
0answers
22 views

Optimised VLAN allocation in Cloud Environment

In a multitenant environment, we need to assign tenant to a particular VLAN for security concerns. What are the factors that should be considered while assigning a new VLAN to a tenant. The VLAN may ...
0
votes
0answers
380 views

Configuring CentOS NIC for an untagged + tagged VLAN

I have a CentOS 6.5 system with 1 physical NIC, which is connected to a switch. The switch is configured so that VLAN 104 is untagged and VLAN 101 is tagged. The VLAN104 is network 172.22.20.0/24 ...
0
votes
0answers
115 views

VLAN setup Cisco SG300 and SIP gateway

Hopefully someone can shed some light here. I'm quite new to networking and not too sure if I'm doing the right thing here. We are setting up a new VOIP phone system with SIP gateway for our company. ...
0
votes
0answers
36 views

SRP521W Intervlan routing and NAT

I've a Cisco SRP521W router which I've set up with two VLANs called normal_Lan and SWSVLAN. I don't want devices on each VLAN to communicate with each other so I've turned INTERVLAN Routing OFF. ...
0
votes
0answers
26 views

Point to point connection not using full bandwith

Here's my network: [A]<------20 Mbit point to point ---------->[B]<-------20 Mbit point to point-------------->[C] At [A] there's a switch, at [C] there's another switch, while at [B] there's ...