0
votes
1answer
396 views

DHCP For Voice And Data VLANs With Router-on-a-Stick

Background: I have 2 Powerconnect 62xx switches stacked with a Watchguard XTM-26 between them and the outside world. Currently all devices connected to the switch are in the same vlan and the ...
2
votes
2answers
91 views

A tricky converged VoIP design

A client (roughly 30 people) wants to replace their existing analog phone system with VoIP. However: they have dual Ethernet drops to some desks, but not all their (recently purchased) router does ...
0
votes
1answer
198 views

Whats wrong with this router config

This is a Netgear FSM7328S which we have VOIP phones hooked up to. The phones will come online for a few seconds\minutes then drop, at which point, we need to go around and manually reset all the ...
0
votes
2answers
109 views

Routing VoIP and Internet traffic

I work for a school district with the following configuration: Two remote sites connect to a main site via T-1s, then the main site has 3 T-1s which provide Internet access, advanced content ...
1
vote
1answer
390 views

How to route VoIP phone through VPN

We have two offices (China and US) connected by site-to-site VPN using 2 Linksys RV082's. We also have a VoIP system with 2 VoIP phones in the China office. We have been having trouble with the ...
1
vote
3answers
721 views

Cisco: Route based on vlan

Is it possible in a cisco router to route based on vlan? I have in the router 2 vlans, and 2 possible ways to go out: One vlan should be routed to a certain ip One vlan should be routed to the ...
1
vote
2answers
732 views

QoS / PBR Routing Questions

I have a 50Mbs Satellite link and a 10Mbs Microwave link supplying a very remote location. Behind these links, I have a 6,400 seat network - with about 3,000 signed in at any one time. My goal is to ...