-1
votes
0answers
16 views

Is there some opensource IPsec server compatible with cisco vpn client? [on hold]

I need some opensource IPsec server compatible with cisco vpn client to simulate network issue. I tried OpenSwan and SoftEther, but they are not compatible. Are there some other? Or maybe I should try ...
-1
votes
0answers
36 views

Watchguard to Cisco VPN

I am trying to setup a site to site VPN. I can see the tunnel is up but i'm unable to ping across the VPN. The other end is a watchguard. Current configuration : 8098 bytes ! ! Last configuration ...
1
vote
1answer
43 views

VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my ...
0
votes
0answers
16 views

vpnc not work on linux backup machine

I have a very strange problem with the VPNC ( vpnc cisco client , open source vpn for cisco ) I installed the VPNC on my linux machine linux_box1 ( red-hat version 6.3 ) this machine is VM ware ...
0
votes
0answers
36 views

Cisco VPNC + get time out on target machine

I am running VPNC on linux red-hat machine ( version 6.3 ) , And my VPN connection seems to be timing out after 10-20 min . If it goes unused for more than a few minutes, I have to kill VPNC and ...
1
vote
0answers
81 views

VPNC cisco + quick mode response rejected error

I installed a vpnc on my Linux red-hat machine version 6.3 Most of the cases vpnc work well ( connecting to gateway customers by vpnc ) But against some particular customers ( Cisco gateways ) , ...
0
votes
0answers
45 views

cisco VPNC - why vpnc not block the LAN interface?

Subject : VPNC allow local LAN access in spite we activate the vpnc on my Linux red-hat machine As all know when we want to activate the cisco vpn on win machine , once vpn is active then the LAN ...
0
votes
0answers
98 views

Will the Linux Open VPNC Client connect to checkpoint or nortel VPN gateways?

Site: http://www.oucs.ox.ac.uk/network/vpn/linux-solaris/index.xml?ID=VPNC What is open VPNC: VPNC is an open-source VPN client for Linux and other Unix systems which is compatible with the OUCS VPN ...
0
votes
0answers
37 views

CISCO VPN CLIENT + on linux machines

I have try to install the VPNC Cisco client on many linux red-hat version For example Linux 5.2 ( red-hat ) Linux 6.2 ( red-hat ) Linux 6.3 ( red-hat ) And on different kind of kernel versions ...
0
votes
0answers
31 views

install cisco VPN client on linux in place on WIN XP [duplicate]

I have win XP with VPN client version - Cisco 5.0.01.0600 Now we want to replace the WIN XP with linux machine , red-hat version 5.x or 6.x , My question is , what the equivalent VPN version that I ...
0
votes
0answers
78 views

Routing through SonicWALL SSL-VPN and Cisco L3 Switch

In the image above, we use the SonicWALL NSA 3500 at our gateway and handle VPN with its SSL-VPN. Our Layer 3 Cisco switch is our core network switch and handles about a dozen VLANs. Most VLANs ...
1
vote
1answer
50 views

VPN Tunnel set up Issues - Cisco WRVS 4400N to Server 2008 R2behind ASA5505

I was wondering if someone could help with a scenario i have that i am not sure how to set up regarding a VPN tunnel set up. I have a Cisco WRVS4400N business router , and on this device , i need to ...
0
votes
0answers
36 views

NO_PROPOSAL_CHOSEN error while connecting

crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group vpn key cse123 pool SDM_POOL_1 acl 100 netmask 255.255.255.0 crypto isakmp ...
0
votes
0answers
63 views

Preserving VPN Flow on ASA + netsh

I have a tcp connection established over a site-site VPN and when the VPN drops it causes errors on the client when sending after the tunnel is re-established. When having this problem before, ...
0
votes
0answers
181 views

OpenSwan VPN Connected but can't ping or connect to anything on right side

On my end is an Ubuntu AWS EC2 VM and on the other end is a Cisco ASA 5500 router. Phase 1 and Phase 2 come up but I cannot access anything on the other end. It would seem there's a routing problem, ...
0
votes
0answers
62 views

Site-to-Site VPN not connecting with Cisco 877

I can't seem to get the VPN connection going with my 877. I have an old IOS (12.4) but it looks to me like all the pieces are there. I have compared this config against the Azure-provided (albeit ...
0
votes
0answers
54 views

Need help troubleshooting QuickVPN hang

have QuickVPN 1.4.0.5 on XP Pro SP3 and am trying to connect to a RVS4000 using its public IP address. QuickVPN gets to "Connecting..." and hangs. The context menu on the systray icon won't come ...
0
votes
0answers
32 views

Cisco 3800 - Crypto map gone wrong

I've noticed a very strange issue on our Cisco3800 router. The router is hosting multiple Site to site VPN connections. Everything was working fine for several months. No changes were made. All of a ...
1
vote
1answer
299 views

Cisco IPSEC VPN Slow Speeds

We have a site to site IPSEC VPN, both endpoints are Cisco PIX 515e's. The links at both end are 100mb, however speeds over the VPN (logged using jperf) are at most 4mb. Obviously this represents a ...
1
vote
2answers
113 views

Sharing Cisco VPN connection with network peers

We have a Windows Seven host with Cisco VPN Client access configured. We want to share this connection with some linux machines. We tried sharing the Lan connection (GUI option), then adding the ...
-1
votes
1answer
60 views

IPsec VPN Server behind Cisco ASA (Transparent mode)

I've a Cisco ASA 5510 with transparent mode, and I'm going to setup a IPsec VPN(Openswan) in a internal linux server(with Public IP). This server has 2 NIC, 1 public IP, and 1 internal IP. I've ...
1
vote
1answer
121 views

Debug: Cisco VPN Router runs 100% CPU

I've turned logging on and all I am currently getting are Debug/Kernel logs. Nothing above debug. This was also during offsite hours when hardly any traffic was going on. I have also upgraded to the ...
0
votes
0answers
35 views

simple subnetting, regarding vpn

i am using 2 cisco rv180 to build up a ipsec tunnel. thats working. but i cant get any packets trough the tunnel. first i was using: local: 10.0.0.X 255.0.0.0 remote 10.0.1.x 255.0.0.0 but 0 ...
2
votes
2answers
135 views

VPNs and NetBIOS

I have a Cisco RV180 VPN Firewall Router and I have QuickVPN and PPTP working. However, I am not able to get NetBIOS working so that I can access everything via NAMES or get the systems to show up ...
0
votes
0answers
75 views

Site to Site to Site VPN

Just wondering if this is possible, we have a leased cisco 2911 (That I do not have access to) at that is set up with a site to site VPN to tie into a third party's Active Directory server. Our other ...
4
votes
1answer
259 views

Cisco QuickVPN Can't view local computers

I am connected to my QuickVPN connection to my RV180 VPN Router and I can access the router via IP but I can't find or see any of the computers. How can I fix that? Do I need to do some more advanced ...
0
votes
0answers
345 views

Strongswan ipsec <--> iPhone, can't access LAN

I'm trying to connect to my LAN with iPhone, using Cisco IPsec VPN connection. I can connect to VPN, but I can't access any LAN devices. Hardware/Software: Strongswan 5.0.4, running on router - ...
0
votes
1answer
58 views

ASA 5505 - Outside IPs required for VPN Tunnel?

I've set up a Site-Site VPN and it seems the config is fine as the other site can establish the tunnel fine. The problem I have is that my side never tries to bring the tunnel up. Ping/telnet ...
1
vote
0answers
136 views

Setting up an IPSec VPN with Cisco ASDM

I am trying to set up a VPN remote access with a Cisco ASDM 6.4 for ASA 5505 Version 8.2(5). In order to set up the VPN I followed this steps. After this steps my info look like this: VPN Tunnel ...
0
votes
0answers
74 views

HTTP and SMB over Cisco LAN-to-LAN IPSec-VPN

we are connecting Cisco 887VA router with various other Non-Cisco routers. VPN tunnels are up and we can ping devices on the remote network through the VPN. However, we have a few devices (on the ...
1
vote
0answers
258 views

SSTP VPN connects, then disconnects

I'm trying to setup an SSTP VPN on Windows Server 2012 which works fine when I connect from the same subnet as the RAS server but does not work when I configure PAT or when I try to route the traffic ...
-2
votes
1answer
100 views

VLAN routing setup with VPN on Cisco ASAs

We currently have two ASA5515-X firewalls, what we want to do is dedicate one of them to providing AnyConnect VPN and two site to site VPNs only, with the second ASA handling firewall ACLs for ...
0
votes
0answers
24 views

How to configure network policy to disallow specific users group access VPN and allow access to cisco devices via telnet? (windows 2008 r2)

I am using radius to authenticate VPN users, and access to Cisco devices. some users allowed to connect via VPN only, others allowed to connect via VPN and access Cisco devices. I want to add other ...
1
vote
0answers
356 views

How Windows establishes L2TP/IPSEC VPN connection without “IPSec ID” (group id)?

I have a third-party VPN server configured with only 4 credentials given to me: server ip, preshared key, user name and user password. Under Windows 7, i can easily connect to this VPN via standard ...
0
votes
0answers
88 views

cisco VPN clients configuration

I work with cisco vpn clients and I want to know more about cisco vpn client configuration first - what’s the difference between internal.ini file and vpnclient.ini file ? both files are under – ...
0
votes
1answer
291 views

Cisco VPN and .pcf file

I have few of profiles .pcf files , and I used them in order to automate the vpmclient connection VIA CLI command I have WIN XP server for example vpmclient connect "customor_alpha" ...
2
votes
1answer
220 views

VPN Failover Cisco ASA 5505

So basically we have a Cisco ASA 5505 (we have inherited this from a customer, none of us have any experience with Cisco's). Now essentially we have to WAN lines which we have setup in Failover, via ...
0
votes
1answer
41 views

Site-To-Site VPN Failover

Conceptually, how does this work/ would be configured in a Cisco environment, I realise this is quite an open question so please let me narrow it down. Let's say we have two sites: SiteA and SiteB, ...
0
votes
1answer
140 views

How do you configure a Lan to Lan VPN on an ASA without using your outside interface IP address?

I have two /28 subnets A & B. My PIX and ASA's outside interface addresses are both in subnet A. I am in the middle of a migration from the PIX to the ASA and need to use the PIX outside ...
2
votes
2answers
262 views

Cisco 871: IPsec Remote VPN

After having followed several tutorials and none of them worked for me, someone might help me here. I have a Cisco 871 router, version 12.4(4)T7. Currently, I have it configured as a PPTP VPN ...
0
votes
1answer
61 views

Meraki VPN Traffic Capture

We have multiple offices interconnected via VPN using Meraki switches. I've been looking around and can't seem to find a way, but was thinking it's possible. Is it possible for me to put my desktop on ...
0
votes
1answer
511 views

Cisco IOS Router and Azure VPN - tunnel established, but traffic is not flowing

I am trying to connect a Cisco IOS router to Azure via the IPSec VPN. I have used the Cisco ISR template to establish a tunnel from my router to Azure. In the Azure control panel, I can see that the ...
0
votes
0answers
315 views

Cisco ASA IPSec Mobile VPN Drops After Inactivity

When I connect to my Cisco ASA 5510 via the built in IPSec VPN on my ipad (over both 3G and Wifi) the connection drops without error (the icon just disappears once I go into settings to check on time ...
3
votes
0answers
118 views

Cisco ASA ipsec vs Anyconnect client issue

So I have an iPad that has a IPSec VPN created. I am able to connect from the outside fine and I can access my local LAN files just fine. When I connect with the Cisco AnyConnect client from the same ...
0
votes
1answer
64 views

Cisco IPSec VPN: Multiple address ranges for crypto map?

I'm setting up an IPSec VPN using a Cisco router. The relevant part of the config: crypto map MYVPN 10 ipsec-isakmp set peer 173.1.2.3 set transform-set my-transform set pfs group2 match ...
3
votes
2answers
4k views

Cleanest, quickest way to generate a Cisco VPN .pcf file?

What's the most efficient way to generate Cisco VPN .pcf files for distribution to end-users? This is for ASA 5500-series firewalls. Coming from a Mac workstation, I no longer have access to a ...
0
votes
1answer
132 views

Cisco asa 5500 series - Logging VPN connections to easily search connection history

We have a fresh requirement to log information to do with vpn connections. The ultimate goal would be facilitating IT management being able to easily review when someone had been connecting / ...
0
votes
2answers
436 views

How can I connect a VPN and VLAN via a Cisco ASA?

I'm trying to extend a VPN further into an organisation: At the main location I have a private network (call it 192.168.0.0/24) which is connected via a Cisco ASA 5510 to a Draytek ADSL router. The ...
0
votes
1answer
390 views

IOS Port Forwarding and NAT involving a VPN

We have a Cisco 1921 router running IOS 15.1 at one of our branches which is connected via a L2L IPsec VPN to a ASA5510 running ASA 8.2 at our headquarters. The network looks something like this: ...
0
votes
0answers
44 views

Lookup Cisco VPN client computer

Our client is running Cisco SSL VPN accessed by AnyConnect clients. Now we have one particular remote computer that is special in such that it connects and consumes services on the network as a ...