0
votes
1answer
80 views

Can't establish a reliable VPN tunnel (ShrewSoft client / ZyWALL USG-50 firewall)

I try to setup an IPSec VPN tunnel through my firewall (ZyWall USG-50), but it doesn't work like it should. quick scheme of my installation: ME [A.B.C.D] --- **INTERNET** | ...
1
vote
0answers
24 views

Cisco RV016 dual WAN and VPN setup

I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ...
0
votes
2answers
263 views

Comcast Business Gatway cg3000dcr kills VPN connections after about 3mb of transfer

I use an L2TP/IPSEC vpn client behind a CG3000DCR Comcast Business Gateway Router, and while it establishes a connection initially, after about 3mb of data transfer, it stalls out, doesn't do any more ...
1
vote
0answers
45 views

How to set the router address in OSX Server VPN

I am able to connect to OSX Server (10.9.2) through a (L2TP) VPN tunnel. However, any other computers in my subnet can not be accessed. On the client (OSX 10.9.2), the router's IP address is being ...
0
votes
0answers
174 views

RRAS behind Ubiquity EdgeMAX drops PPTP tunnel

I have a Server 2008 R2 machine behind an Ubiquiti EdgeMAX router. The router has been configured as a NAT, and all GRE traffic along with the TCP control port (1723) has been forwarded to the ...
0
votes
1answer
196 views

How to forward traffic to VPN device

I have set-up OpenWRT in a virtual machine which acts as a router. It has two network interfaces: br-lan: connected to vm internal network eth1: connected to internet through host via NAT I have ...
0
votes
1answer
140 views

pptp client passthrough frtizbox 7390

I´m trying to connect vpn client pptp to remote server and it doesn´t work on my actual place. Here is fritzbox 7390. Vpn works because i tried before with the same laptop in another place. Thanks.
0
votes
1answer
82 views

HP MSR20 Router VPN Questions

I have limited experience with routers, I was wondering if some offer some insight. I am considering deploying a series of HP MSR20 (or similar routers) at a number of satellite offices which have ...
-1
votes
1answer
51 views

How to integrate a separate sub-network within a customer's existing LAN? [closed]

I work for a machine builder, and our system has it's own ethernet network (192.168.1.x) with a switch and a dozen devices, most of which have firmly established static IP addresses. For our next job ...
0
votes
0answers
18 views

Acceptable time interval before attempting to reset a connection?

I am writing an application for a router which simply connects it to a VPN. If for some reason the connection fails, the application will attempt to acquire a new socket and reset the connection. My ...
0
votes
1answer
124 views

Branch to Branch VPN through HQ router?

I've just upgraded our router and am working my way through setting it up as the old one was. The new router is a Draytek Vigor 3900. We have a number of sites with IPSec tunnels dialling in to our ...
0
votes
1answer
162 views

What is my local address on the router when connected through PPTP?

I have just set up my very first VPN this week allowing me to connect to work (this way, I get to work from home, which was worth the effort). As through magic, it now works, and I'm sending this ...
0
votes
1answer
267 views

Router with multiple incoming IPSec VPN Tunnels?

We currently have a Draytek Vigor 3200 Multi-Wan router which has 5 incoming VPN tunnels using IPSec AES encrypted configurations. All five sites are using Draytek Vigor routers, most are Vigor ...
0
votes
1answer
147 views

Cisco SSL VPN with Windows 7 Client?

I have a Cisco ISR model 1841 running IOS 12.4 I would like to replace my aged SonicWall pro2040 with it. The main problem I am trying to find a solution to is whether or not I am first create an ...
1
vote
1answer
216 views

How to setup a ubuntu server as a VPN server and a router [closed]

I have search the forum and could not get what i want so im starting a new question. I want to ask that how can I make Ubuntu system a VPN server that connects to Internet via another NIC. this is ...
-1
votes
1answer
72 views

Cannot connect to external 192.168 address [closed]

I am connected via VPN to another network which uses IP addresses in the range 192.168.x.x. I have changed my home network to not use that network (I use 10.10.x.x). However, I cannot seem to access ...
0
votes
1answer
78 views

Are there any routers supporting client-side VPN? [closed]

What I'm asking for is basically what the title says. I need a router that can forward all the data-traffic it receives through a VPN tunnel. Have Google'd a little but I can't seam to find a topic ...
0
votes
1answer
87 views

VPN set up behind Router (Windows) [closed]

I have a computer that is connected to a basic router. How can I set up a VPN connection that will work over the internet? Or what do I need to set up a VPN connection behind a router? The computer ...
0
votes
3answers
400 views

Can I attach a VPN firewall to an existing network and have it manage VPN connections?

I'm quite new to networking and am trying to set up my first VPN connection. The Situation: I have been contracted for some programming at a facility some distance from my location. I would like to ...
1
vote
2answers
326 views

Router for Internet via VPN, HTTPS-Proxy or SSH

I'm curious if someone knows an answer to my quite special question. I want to realize the following setup: I have 1 static IP with (restricted) internet access via Ethernet. I want to get a router ...
0
votes
2answers
78 views

two network from one adsl connection,

If i use a telephone splitter at an adsl line and connect a VPN test modem and the existing modem to the output of the line splitter,can i get two network with different static ip address? I know this ...
0
votes
2answers
2k views

How to route/redirect my Internet traffic through another router/node on the net?

I am trying to access some content on the Internet which has some stupid geographic restrictions (access limited from a specific country. Most likely the restriction is IP based. I happen to have ...
1
vote
2answers
112 views

Connecting multiple lans by VPN

Our customer has about 10 different offices. Head office has a router which maintains IPSec VPN connections to all of the site. Each site has their own IP range, eg.. 192.168.50.x 192.168.60.x ...
1
vote
1answer
99 views

Replacing modem with a vpn router

Can I replace an open network iconnect 624 modem with a cisco router in a small network that needs multiple PPTP VPN connection? iconnect 624 modem doesnt allow multple simultaneous PPTP VPN channels? ...
3
votes
3answers
2k views

How do I get internal hosts to use a VPN connection set up on a FreeBSD router?

Question in short: How do I get traffic from a host on an internal network, using NAT behind a router, to use a VPN connection set up on the router? I have a FreeBSD 9 router with 4 network ...
0
votes
1answer
114 views

Hardware Recommendation - Consumer Grade Wireless Router that is capable of routing to two separate networks from a single connection [closed]

I need to purchase a wireless router for an end user which is capable of routing between the public internet and our internal intranet depending on the traffic request. Basically, I need the router ...
0
votes
2answers
326 views

Router VPN for mobile remote UPNP & SAMBA

I found those related posts helpful: How to setup VPN on home network VPN Router Recommendations? Wireless router with vpn server but I'd like to know how to configure my router and the other ...
1
vote
2answers
81 views

where can we get information on multi-wan routers [closed]

At the moment we are looking for a 10/100 dual (or multi)-wan router with VPN capability that would load-balance VPN traffic and would provide redundancy if one line were to fail temporarily. It would ...
3
votes
1answer
2k views

OpenVPN redirect-gateway does not work on Windows 7?

i have set up openvpn, and it works. pinging from client to server and backwards works just fine. but now i wanted to redirect all the clients traffic through the vpn. so i did the following steps as ...
1
vote
1answer
211 views

can't get the two routers to connect

I currently live in Brazil, but I use VPN to access some US-only services. I don't want to use my computer for that since it forces me to route the connection on my Apple TV, XBox through my Mac, ...
0
votes
1answer
253 views

Cisco 800 Series Routers and dedicated point-to-point VPN

My company is looking for a solution where two branches can be connected securely. The goal is to have the two branches establish a vpn conection (at the router levels) so anything connected beyond ...
3
votes
2answers
139 views

VPN Router question

What does it take to set up a wireless router to connect to a vpn service so everybody in the local wireless network surfs the internet through that vpn tunnel? What do I need to be careful about? ...
1
vote
2answers
899 views

VPN can connect but cannot VNC or RDP?

I am running Windows XP Professional SP3 on my Dell laptop. I use a VPN to connect to my work network to work remotely and control the computers and servers etc. I am connecting at home from an O2 ...
0
votes
1answer
181 views

How to connect to a server via wifi device using a dialer(vpn)?

Question: How to connect to a server via Wifi device using a dialer? Description: I have a dialer that I use to connect to my cable network server in order to access the internet. I connect using ...
0
votes
2answers
121 views

Can I just drop in a new DHCP server in place of my old one without breaking everything?

Right now, in my office, we have a Cradlepoint MBR1000 wireless router as our DHCP server. It's not as configurable as I'd like for it to be, and I need to set up a VPN, so I am considering replacing ...
0
votes
2answers
890 views

Routing traffic through a specific port depending on Subnet requested

I have my network setup with a sonicwall device as the default gateway so all my traffic goes in and out through it. Now I have just setup a VPN on a cisco router from our local network of 192.168.5.X ...
0
votes
1answer
295 views

IPSEC VPN Router / Firewall [closed]

I'm not sure whether it's the right place to ask for a router / firewall recommendation. My requirements are as follows: supports IPSEC tunnels (at least two connections) has WAN/LAN throughput of ...
1
vote
1answer
438 views

Server over VPN?

I don't know that much about VPN, so it could be that this is utterly impossible. Here's hoping, though. I would like to forward a port from my router to a machine connected to the network via VPN. ...
1
vote
3answers
172 views

Securing HTTP traffic between data-logger and website, options

Got some IP data-loggers (that measure temp., humidity, light-level) sitting inside bunch of warehouses / stores with each warehouse / store being a different customer from my standpoint. These ...
0
votes
1answer
251 views

Data center router/firewall recommendations

I'm looking for help deciding on a new router for our data center equipment. Currently, we've got about 10 machines, each with their own firewall. I'd like to get them all behind a single router and ...
1
vote
0answers
738 views

Draytek Vigor 2820 Firewall prevent web access from IP

I have a few Draytek Vigor 2820 routers and have recently set one up using settings from another. I have it set up on the firewall filter to block torrents which it does very well. The issue I am ...
1
vote
1answer
150 views

Replace Sonicwall TZ series

What are some devices that i could use to replace several TZ series devices. The only function i really need is the Site-to-Site VPN. Preferably not a Sonicwall device they have the worst support I ...
0
votes
1answer
251 views

Connecting two routers together [closed]

I have a d-Link DIR615 router provided to me by my ISP, and a Vigor2900G router. I used to have the Vigor router as my main router, but since I upgraded my internet connection and speed, the Vigor ...
1
vote
2answers
951 views

QNAP TS-419p as a VPN Gateway?

I am hoping one of you might be able to help. I want to make files stored on shared folders on a QNAP TS-409p available to users over a VPN link. How is the possible? Can someone explain what I need ...
3
votes
2answers
814 views

Replacement/upgrade for RV082 wired router with VPN access

Current Configuration We have two sites that are connected via a gateway-to-gateway VPN tunnel using Cisco RV082 routers. We also have VPN access using QuickVPN for our Windows employees and PPTP for ...
1
vote
1answer
358 views

PPTP-Gateway routes icmp but no http

got a very strange behaviour with a Gentoo-based PPTP-Gateway here. I configured the VPN and the default routes - from the Gateway itself, the connections out to the VPN work great. But from the ...
0
votes
1answer
491 views

Sonicwall tz210 configuration issues

I recently upgraded my firmware on my tz210w (maybe a month ago). Ever since I have been having issues logging into the administrator configuration via browser. Has anyone else noticed this issue? ...
12
votes
3answers
1k views

Can you recommend a good intro to iptables?

I have to setup a firewall on a Linux server (all my previous experience is with Windows). My rules are meant to be pretty simple - forbid all, allow some ports with all, allow some ports for specific ...
1
vote
0answers
1k views

OpenVPN & Juniper SSG-140

I asked this question over on some Juniper Forums but they seem to be pretty dead as in over a week it hasn't had that many hits and no one has had any advice. I figure if I can find someone familiar ...
0
votes
1answer
539 views

Accessing shared resource on local computer from users of different physical location

Sounds like easy task to some but such a difficult task for me to do... The main requirement for this task is to setup something in offices located on different locations, so (1st question) users ...