Tagged Questions
0
votes
0answers
17 views
Set SSTP VPN connection's “Register this connection's addresses in DNS” setting
I have followed the instructions found here to setup a SSTP VPN connection using powershell. I would like for the RAS connection to have the connection created with the "Register this connection's ...
2
votes
3answers
167 views
Remotely administer hundreds of computers
I work for a company that has roughly 500 (expanding to over 1000 this year) computers out in the field. These computers are spread all through America, with 2 of them in Canada (noone bothers with ...
0
votes
0answers
39 views
Use default gateway on Remote Computer gets unchecked by GPO
A little GPO issue here, someone was playing around in the GPO's and now we have an issue that we can't figure out. We have Win7 images that use PPTP connections to connect to our backend. When the ...
-2
votes
1answer
44 views
Lost connection to my laptop in the office from my Home as I used VPN on my laptop [closed]
I am working out of office and my laptop is in the office. We have windows VPN in our office network. I VPNed into our network and accessed my laptop.
We have a client whose VPN password expires every ...
0
votes
0answers
144 views
How to configure StrongSwan for Android & Windows (XP/7) clients?
I'm having a lot of trouble trying to configure StrongSwan VPN on Ubuntu 12.04 LTS to allow connections from Windows 7, Windows XP Embedded, Windows 7 Embedded, and Android Tablets (Galaxy Tab 2 8.9) ...
0
votes
1answer
30 views
Requiring all network traffic go through VPN in Windows 7
I have a VPN service that I can can connect to through Network and Sharing Center manually and this works great, but sometimes I forget to enable it or it goes down and then my traffic is not tunneled ...
0
votes
1answer
82 views
L2TP/IPSec Conectivity Problems
We ar traying to establish a VPN to our office.
We sucesful configured a debian server using openswan and lx2tpd.
We test the conection on the local network, and established a VPN conection with the ...
0
votes
0answers
181 views
How to route all Internet traffic from Windows 7 client through OpenVPN server
I'm having trouble setting up a private VPN to route all traffic from my clients through my VPS linux box in another country. I'm able to connect successfully and ping the internal IP of the VPN, but ...
1
vote
2answers
227 views
VPN Connection keep asking administrative password in win 7
I'm sorry if I ask in the wrong forum. I'm not sure it is actually a networking problem, but I haven't found a proper forum for my question so far.
I setup a vpn connection for a pc in a store to the ...
0
votes
0answers
140 views
Invalid username or password - Network Share with VPN Mapped Drive
I have an issue connecting to a network share from Windows 7 Professional client to Windows Server 2008 R2.
Here are the particulars of the issue:
When outside of the office, I log in to the ...
-1
votes
1answer
60 views
How Can I enable rdp access to a laptop after it connects to VPN? [closed]
I connect to work's VPN on my laptop. I added a route but the moment my laptop is connected to work's VPN, I can no longer access it from my desktop. Here's the route I added:
route -p add ...
-4
votes
2answers
385 views
Manually add route to VPN
Hello server enthusiasts,
I have a VPN (pptpd running on Ubuntu 10.04) that I am trying to connect to with a client (Win7).
I can successfully connect to the VPN.
Once connected to the VPN, I can ...
2
votes
0answers
133 views
What does tracert make NETBIOS work on Win7?
This is really strange - I have a workaround for this (read on), but I'd love to know why it works.
I had a VPN setup working fine with a WinServer2003 server and a Vista client.
Then I setup a new ...
0
votes
1answer
167 views
GPO Setting to allow workstations to use VPN
Is there a GPO setting that allows non-admins access to change their network settings. Which is what the SSLVPN does? If so, what is it?
Background :
I've got a few laptops that are used by Domains ...
0
votes
0answers
62 views
Windows VPN for remote site connection drawbacks
I'm looking for some thoughts on a particular way of setting up a estate of machines.
We have a requirement to install machines into unmanned, remote locations. These machines will auto login and ...
0
votes
2answers
153 views
Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN
I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my ...
1
vote
0answers
78 views
VPN worked with Vista client, but breaks with Win7 client
I have a VPN with WinServer2003 on the host side and Vista (x64) as the client.
The Vista client (192.168.0.nnn) connects daily to the VPN to backup all the machines on the host side (10.1.nnn.nnn). ...
0
votes
0answers
231 views
Setting up SSTP Server on Windows 7 [closed]
Is it possible to set up Windows 7 to accept incoming connections using SSTP instead of PPTP for the incoming VPN? This link gives instructions for PPTP (rather good instructions actually) but ...
0
votes
1answer
2k views
How to share internet over VPN and inside a virtual machine (Windows)?
`
My final goal is to have a virtual machine at work in which anything that happen inside (tcp, udp, ping, ...) will use the Internet connection of a computer at home. So, if inside this VM should I ...
0
votes
0answers
126 views
VPN over mobile hotspot connection limited access
Verizon service
Sonicwall VPN / VPN client (basic/standard settings)
Windows 7 64 bit
I can connect, but then I can't get access to shared resources or actually USE anything that connecting to the ...
1
vote
0answers
57 views
Tunneling Windows 7 to Windows 7 over existing OpenVPN [closed]
I'm trying to set up a Windows VPN connection inside an OpenVPN connection. Our existing OpenVPN connection opens exactly one port, 22, so the only thing I can do is SSH. I would like to establish ...
0
votes
1answer
774 views
unable to access a NAT'ed IP via a VPN on Windows 7
I connect to a range of servers hosted by one provider via a VPN. I can connect to the VPN fine, however when I then go and try and connect to the server(s) it fails.
A NAT'ed IP address that has ...
0
votes
3answers
273 views
Can I attach a VPN firewall to an existing network and have it manage VPN connections?
I'm quite new to networking and am trying to set up my first VPN connection.
The Situation:
I have been contracted for some programming at a facility some distance from my location. I would like to ...
1
vote
0answers
279 views
Connecting to a Cisco ASA 5510 with Win 7 VPN client
Is it possible to configure a Cisco ASA 5510 to accept a connection from Windows 7 with the built in VPN client software in Win7 ?
I know this question has sorta-been asked before on SF but I'm ...
1
vote
1answer
1k views
Windows VPN - NO internet access
I host a network of servers behind a Fortigate 200a firewall in the DC.
I connect to those servers via a VPN connection.
The problem is that when i connect to the VPN, I lose my internet connection ...
4
votes
0answers
1k views
L2TP/IPSec from Windows 7 to ASA 5520
I am trying to setup L2TP/IPSec on our ASA5520 to support a fringe case for one of our developers. The Windows VPN subsystem apparently stores the kerberos or NTLM cookie for the login when you use ...
1
vote
1answer
552 views
Internet Explorer not working after establishing a SSTP VPN connection
I have a problem which is constantly appearing on each Windows 7 computer I'm using, whenever I establish a SSTP VPN connection to a ForeFront TMG 2010 firewall; it only happens with SSTP connections, ...
2
votes
2answers
4k views
How to monitor VPN traffic with Wireshark on Windows 7?
I'm running Wireshark 1.6.7 (latest available release) x64 on Windows 7 x64.
I only have a single network card on this computer, and Wireshark shows only it as an available adapter to capture packets ...
1
vote
0answers
119 views
“Error 53” with local LAN machines after VPN session on server
I have a Windows 2000 server with a Windows 7 client that occasionally gets "error 53" when accessing the server by name (net view \\server). It still works by IP address (net view \\192.168.0.1).
...
1
vote
0answers
778 views
Can't uninstall broken network adapters [closed]
I have 3 Fortidrv miniport adapters (IP, IPv6, Network Monitor) that show up in my Device Manager on Windows 7 Home Premium pc with the yellow "!" icons. These devices are hold-overs from a Fortinet ...
0
votes
1answer
193 views
Restrict VPN user to Remote Desktop only with Sonicwall [duplicate]
Possible Duplicate:
Restrict VPN user to Remote Desktop only with Sonicwall
Basically I want him to only be able to log onto the VPN in order to use Remote Desktop to use HIS machine. Not ...
4
votes
7answers
5k views
VPN Connection causes DNS to use wrong DNS server
I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site.
When I do connect, I lose network ...
0
votes
1answer
486 views
Cisco Anyconnect via OpenVPN tunnel on Windows
I'm trying to connect to a Cisco VPN using an USB-tethered connection using OpenVPN. The moment I enable Cisco AnyConnect, traffic stops on OpenVPN interface, resulting in disconnection.
OS is ...
0
votes
2answers
172 views
Strange PPTP Issue
I have a Windows PPTP VPN Tunnell that I connect to. This terminates on a Win2k8 Server.
I authenciate fine to the VPN. I can RDP to my admin workstation fine and from this I can RDP to all of the ...
2
votes
1answer
621 views
Can't map network drive on Windows 7 after closing VPN connection
So the command below works if I reboot my computer. But whenever I VPN to a certain customer's network on Windows 7, I lose my mapped drive. And when I try to re-establish the mapped drive (even ...
2
votes
1answer
192 views
VPN to a customer's site locking out my local AD account
We have an account lockout policy on our domain which was put in place purely to stop brute force attacks. It locks out an account for 10 minutes after 50 bad logon attempts within a 10 minute period.
...
1
vote
3answers
884 views
How to create a VPN between a Host and VMWare VMs?
I have a set of machines as follows
My home laptop running Win7 Ultimate with internet connection.
A vmware workstation vm running Windows Server 2003 Standard edition server in my laptop w/o ...
1
vote
2answers
252 views
Is it possible to create a SSTP (VPN over SSL) without Windows Server?
Does anyone know if is possible to create an SSTP VPN avaiblabe on Windows Server 2008 R2 and Windows Server 2008 with SP1 using Windows 7 as a Server?
0
votes
1answer
499 views
how to detect moment when mapped network drives are lost on Windows 7
For some reason, I keep losing access to my company's network drives. I'm using Windows 7. What could cause this? I'm the only one that VPN's to a certain client using the Windows 7 VPN ...
0
votes
4answers
3k views
Is it possible to force PPTP VPN tunnel as the only internet connection on a windows 7 machine?
I use a PPTP VPN tunnel to connect to the internet. I want the connection to cut off if there is a problem with the VPN and it drops/disconnects so there is no way to access the Internet without a ...
2
votes
2answers
225 views
DNS problems when connecting to home network through VPN [closed]
I recently enabled VPN connections to my Windows Server 2008 R2 box, and even though I can connect to it just fine from Windows 7, I am unable to access anything on the network via its intranet domain ...
4
votes
3answers
2k views
Does Windows 7 VPN work with a Cisco ASA 5510
We have a Cisco ASA 5510 router and are trying to get a couple users setup for VPN access. They are running Windows 7 x64 at home and cannot install the VPN client we have for our router (it only ...
0
votes
1answer
436 views
Question about DNS priorities when connected to VPN
So I'm connected to a Windows VPN and I want the following conditions to be met:
I want my internet connection to tunnel through to the VPN's internet connection (i.e. I don't want to use the ...
2
votes
1answer
360 views
Remote VPN User - Domain Credentials
Morning,
We have a client who uses a Windows 7 laptop and connects remotely to an SBS2011 network via VPN that terminates at a Watchguard device.
This is a recent upgrade, the server was SBS2003 and ...
3
votes
2answers
20k views
Where can I download the latest 64-bit edition of Sonicwall SSL-VPN NetExtender for Windows 7?
Does anyone know where to download the latest edition of the 64-bit version of SonicWall SSL-VPN NetExtender for Windows 7?
2
votes
3answers
2k views
Multiple VPN Connections, One IP?
In my office, we are working off one IP address currently, and this lets us connect a single computer to one of our client's VPNs, which effectively locks out multiple people from working with that ...
1
vote
1answer
654 views
What is the proper way to specify the port number for a VPN connection in windows?
I'm using Windows 7 Professional and I've setup an "office" connection (i.e. VPN connection), but I'm having trouble connecting to the VPN server. The port number I'm supposed to use is 3389, but I'm ...
0
votes
1answer
1k views
IPRouterEnable in Windows 7: how to redirect forwarded incoming traffic to VPN connection?
Wanted to move a bunch of VPN configs (including vpn-via-vpn-via-vpn scenarios) to existing Win7 installation under VMware. So the actual title is: "IPRouterEnable in virtualized Windows 7: how to ...
0
votes
2answers
307 views
Windows VPN with internet access
At work we have a Windows PPTP VPN server. I'm guessing it's an XP server, but I'm not sure and I'm not allowed to peek.
At home I have a Mac Mini running Snow Leopard. When I connect to the PPTP ...
1
vote
3answers
294 views
route to vpn based on destination
I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations ...
