0
votes
0answers
11 views

xen: domu require more memory than mem-set size

Assume that we have install two guest os in xen, named dom1 and dom2. Now, I start the dom1 and dom2, and both are configured with max-mem=4096M; note that my physical memory is 16GB. While dom1 and ...
1
vote
1answer
104 views

Whole block device named xvda1, xvda2 instead of xvda, xvdb

I am working on a VM that was set up for me in a public cloud. It's running under the Xen hypervisor in paravirtualized mode and has two virtual disks. So I expect the virtual disk block devices to be ...
2
votes
2answers
105 views

DRBD Madness on Virtual Environment (XEN)

Right now I am using DRBD to replicate two directories (/var/www and /var/spool/mail) on two different XEN VPS's and they're 7000 Miles away from each other! on the top of that I am using a ...
2
votes
1answer
173 views

Xen Dom0 could not find boot device (or any disk)

I have a brand new DELL server running SLES11 SP1 where I am trying to install my very first Xen Hypervisor. So I installed "Hypervisor and Tools" via YaST (excluding graphical elements), which ...
2
votes
2answers
457 views

Error running xe sr-create

I'm trying to add a new SATA drive (SSD) as a local SR. XenServer may have seen the drive before, but I don't recall every doing anything with it. I'm attempting to run this command: xe sr-create ...
3
votes
1answer
81 views

Smart solution for XenServer firewall?

I've been searching for a smart solution for a XenServer firewall for about a month now. The documentation for the new default networking backend "openvswitch" is not that detailed and I can barely ...
0
votes
1answer
239 views

need help SolusVM Xen-pv error

I recently use Solusvm and xen and I have a problem with xen-pv there is a xen-pv template by default with the solusvm Centos-5.3-x86 I have created a machine to test it but I have this error : ...
0
votes
1answer
178 views

smartctl or hddtemp for xvda [closed]

I'm trying to check the state of the drives on a remote server running Debian wheezy. I'm using a software RAID10 on top of, I guess, xen, since the entries in /dev are /dev/xvda and /dev/xvdb But ...
1
vote
1answer
283 views

Xen dom0 reports incorrect amount of RAM with dom0_mem set

I've done a fair bit of searching about this, but have found nothing that answers my question. I have a system with 6GB of RAM which acts as a Xen server. For reference, it runs Ubuntu 12.04. I've ...
2
votes
1answer
343 views

Using ZFS or XFS on a Xen guest running Linux

Background: I'm investigating the viability of using a filesystem other than ext3/4, with the ability to run snapshots for backup and rollback purposes. The servers under consideration are mailbox ...
0
votes
1answer
125 views

Server hangs after typing reboot command

I have a Debian Wheezy installation with Xen in kernel. All is fine but ... when I type a reboot command or shutdown -r now, my server is stuck and I see only that info on screen: INFO: task ...
0
votes
0answers
71 views

opensm reports - Invalid requested MGID. What does it mean?

I've been working on a virtualized SR-IOV infiniband interface under Xen. If I run the OpenSM daemon under Dom0 IPoIB appears to work in the passed through VF. However, opensm starts using a lot of ...
3
votes
1answer
374 views

How to get virtualized SR-IOV Infiniband interface UP?

I've spent several days on this now and I've managed to get SR-IOV working with the Mellanox Infiniband card using the latest firmware. The Virtual Functions appear in Dom0 as 06:00.1 Network ...
0
votes
0answers
65 views

Linux networking: issues with connection loss using xen virtualised xen guests (?)

I am encountering strange issue. I've several xen virtual machines deployed at HP Proliant Servers (120,360,380 gen5,6,7 - different). Some of them are PVM XEN running linux guest, some of them ...
0
votes
0answers
74 views

Xen dom0 rebooting

I am using Xen version 3.0.3 and running 4 domU's on this.(guest OS is windows) suddenly my dom0 reboots for no reason.This is happening frequently for last 2 days. I checked xend and system logs but ...
0
votes
1answer
309 views

Xen USB pass through

Running the Xen (Debian). I want to access the iKey USB dongle from Windows DomU. I have 2 PCI: lspci: 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:1a.0 ...
0
votes
1answer
86 views

Xen: what are domU kernel config requirements for live migration?

We recently added iSCSI storage to two Xen servers running a mix of Gentoo and Ubuntu 10.04 and 12.04 domUs. When trying out live migration of domU I found that I can migrate just fine the Ubuntu ones ...
0
votes
0answers
110 views

Xen Kernel - Only One Core Showing

So I have a dedicated server running the Xen kernel but for some reason it only shows one core instead of 4? Does that mean that my VPS that is running is only getting access to the 1 core or do they ...
0
votes
1answer
374 views

Xen dom0 not forwarding to domU over bridge

My setup is about as basic as you can get. I have 2 interfaces on dom0 (Debian Squeeze), eth0 and eth1. I created a bridge for eth1 to forward packets to domU that has a public IP address. I can ...
4
votes
4answers
244 views

Allocated Memory difference in xen guests with Linux 2.6.18 and 2.6.32

Can some one explain me why there is difference in available memory on Guests with same configuration: Hypervisor:xen 4.2 64 bit VM1: Centos 5.7 with 2.6.18-274.el5xen, Assigned memory from xen is ...
0
votes
2answers
272 views

How create partitions with custom layout in VM on Xen Server?

We use XenServer with RAID 0, as one disk only (I wonder if this is a good approach, if not what would be ?), then we install Xen. After that we put the centOS 6.4 x64 DVD in the server and try to ...
1
vote
2answers
1k views

Determine which guest is running on XEN: HVM or PV guest

I'm working with a Xen host which is installed XenServer from Citrix by someone. He already installed a lot of CentOS 5.2 guests on the host. I wonder how to check those guests to know they are PV ...
1
vote
1answer
294 views

Booting Ubuntu 12.10 guest on Debian 6.0.4 Xen with pygrub

I'm trying to run a Ubuntu 12.10 off a Debian 6.0.4 and Xen-4.0. I realised that pygrub might not be able to parse the menu.lst (I symlinked menu.lst to grub.cfg in /boot) and ended up with this ...
0
votes
2answers
523 views

Strange Ubuntu boot up warning

I have a VM (Xen based), I can boot up the machine but there are some warning during the boot up. Are they normal? If not, how to solved? md: Scanned 0 and added 0 devices. ...
1
vote
2answers
130 views

Does Xen need an XServer for graphical display?

I'm trying to create a very small ISO, which is bootable and brings up a DomU such as Windows 7 using Xen. I want to setup the minimal number of packages in the small ISO, therefore I'm wondering if ...
1
vote
1answer
196 views

ntpdate setting incorrect date after boot

I have a few Debian XEN virtual machines and upgraded them to wheezy(I need the 3.2 kernel for a project). Everything was okay until I rebooted on of the machines. My current problem is, that ntpdate ...
0
votes
1answer
145 views

Best way to move one VPS from one provider to another? [closed]

I have a VPS server (Xen based) purchased from one provider, now I want to move the server to another (kvm based) What are the best way to do so? I really don't want to re-install the whole system, ...
1
vote
0answers
53 views

Domus Memory Used Issue With Xen On CentOS

Anyone know why I'm receiving this error? I compiled latest libvirt from source, I also tried with various rpm. I would like to get memory used by domus and it looks like it's not working with Xen 3 ...
1
vote
1answer
93 views

Xen DomU (Guest) OS on different hard disk to Dom0?

I have followed the guide provided on the Ubuntu Community Documentation for Xen and I have successfully installed eight guest OS's on a different machine. In the guide, I use the command: sudo ...
1
vote
1answer
100 views

How can I configure a Xen image to run on EC2 with different drive names?

I'm in the process of creating a number of Amazon Machine Images (AMIs) that will be uploaded and run on the basis of our Xen images. However, I'm running into problems with some platforms where the ...
1
vote
0answers
53 views

OSPF on XEN host running several VMs

Is it possible to set OSPFs areas in a XEN environment to setup a virtual cluster? Main intention is to avoid a external router since all VMs will run inside the same machine.
0
votes
2answers
754 views

XEN kernel shows less memory 32g

I have installed Oracle Enterprise Linux 64bit on the server with 64g of RAM. But the system detects just 32b of memory, here are the details: [root@oracle-node2 ~]# uname -a Linux ...
1
vote
1answer
76 views

saving loaded kernel modules

I did the following in command line: modprobe ipt_LOG modprobe ipt_multiport modprobe ipt_state modprobe ipt_limit modprobe ipt_recent modprobe ipt_owner modprobe iptable_nat modprobe tun/tap ...
0
votes
0answers
49 views

enabling modules for a kernel

I have a KVM/XEN VPS and would like to enable the following modules: ipt_LOG ipt_multiport ipt_state ipt_limit ipt_recent ipt_owner iptable_nat tun/tap iptable_nat ipt_MASQUERADE ipt_POSTROUTING PPTP ...
3
votes
1answer
785 views

AppArmor - root: “You do not have enough privilege to read the profile set.”

I'm trying to use AppArmor on a remote hosted Xen server with a custom built kernel. AppArmor appears to be running, but not correctly. For example if I run the following command as root: # ...
0
votes
1answer
435 views

Issues migrating a CentOS 4 xen guest to VMWare

I am migrating a xen guest. It is running a CentOS 4. I am using the same steps that have worked in the past for our RHEL5 and RHEL6 based systems but for some reason, I'm getting errors. Here are ...
0
votes
1answer
331 views

Xen: can't get Dom0 and the DomUs to ping eachother

We have installed a Xen (4.1) configuration and can't get Dom0 and the DomUs to communicate (ping eachother). The DomUs are able to ping eachother but not Dom0, and Dom0 cannot ping the DomUs. We ...
0
votes
1answer
227 views

Changing boot device in initramfs on the fly?

I try to boot a XEN VM and it looks like the hard drive naming changed from /dev/sda1 to /dev/hda1. So the boot process drops me to a busy box in initramfs. How can I specify the probably right boot ...
0
votes
2answers
765 views

Is it possible to share 4 cores single CPU among 12 virtual machines on Xen?

I have to host about 12 virtual machines on Xen server. all of them are very lightweight Linux machines. Means not resource intensive. I have a xen server with single CPU with 4 cores. so is it ...
3
votes
1answer
504 views

Network Bridge in dom0 can not ping domU's

I am using Debian wheezy with XEN 4.1. I have two network bridges xenbr0 and xenbr1. xenbr0 is linked to the real-eth0-nic so the domU's can talk to the outside world, which worked fine. xenbr1 was ...
2
votes
1answer
149 views

Access to WAN from one VLAN

i want to create a VLAN for 3 guest VMs. I already have it and every VM can ping each other, but the problem is that any guest CAN NOT have access to Internet Network configuration in Host machine # ...
0
votes
1answer
426 views

How can vms be assigned to physical cores or threads in xen

I am having intel EX5620 Cpu which has 4 Cores and 8 threads. cat /proc/cpuinfo is showing 8 cpus. From xen's wiki page they are saying its better to assign each vm to cpu core for better ...
1
vote
1answer
329 views

Virtualization on Atom D2700

Will paravirtualization work fine on Atom D2700 with 4 Gb RAM? Just several ubuntu/debian (maybe others) VM's with not heavy loads (LAMP for tests, torrent client, file server for PC and Mac etc.). ...
2
votes
2answers
212 views

How to figure out disks performance in Xen?

So, I have a Dell R710 with PERC 6/i Integrated and 6 450Gb Seagate 15k SAS disks in RAID10, I have 30 Xen vps working on it. Now I need to deploy second server with same hardware for same tasks and I ...
2
votes
2answers
105 views

xen - what constitutes a 'system'?

In the release notes for Xen 4.2 this statement appears: Large Systems: Following on from the improvements made in 4.1 Xen now supports even larger systems, with up to 4095 host CPUs and up to ...
1
vote
3answers
147 views

How to make a vm scale when demand for resource increases

i am having a server with 16 virtual core and 24G RAM,using Xen virtualization and ubuntu as dom0 Created 4 VMs (in para mode),each with different applications. CPU Load vary on each vm,somtimes ...
1
vote
1answer
3k views

Machine check events logged

In /var/log/messages, this error occurred: Sep 19 13:18:15 wdc kernel: [2772302.630416] Machine check events logged Shortly there after, the entire server became unresponsive. This is in the log of ...
1
vote
0answers
99 views

Ubuntu 10.04 Xen guest - why would time drift be proportionate with the system load?

We are trying to troubleshoot an issue with random system lockups during medium - heavy loads on an Ubuntu MySQL 5.1 server. There is nothing logging into the system during these lockups. The only ...
2
votes
0answers
175 views

Xen and Turbo Boost

Running the Debian Squeeze default Xen, I am unable to get any of the CPU frequency scaling stuff going. As soon as I revert to the standard kernel I get it. Digging through the internet it seems ...
5
votes
7answers
3k views

Secondary IP (eth0:0) acts like main server IP

I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 ...