7 reputation
3
bio website
location
age
visits member for 2 years, 7 months
seen Dec 23 at 14:48

Jul
11
awarded  Popular Question
Apr
8
comment Windows 2008 R2 - No internet access with static IP
Thanks all, this is pretty complicated. The Juniper has an interface with a couple of MIPS the seem to be no longer working. Not sure what is going on with it. Maybe is bad interface or maybe the public IP number on the interface is not working as it should
Apr
7
comment Windows 2008 R2 - No internet access with static IP
No, we didn't change anything. We didn't come back online so we rebooted our network. The one thing I changed is put a new NIC into this server that has a problem. I also have a VM that stuck in Access Only network mode and that is my next problem.
Apr
7
comment Windows 2008 R2 - No internet access with static IP
mfinni - good idea, I am trying to find them. Checked the lease tables but the IP addresses for DHCP are 100+ and the static IP is 17.
Apr
7
comment Windows 2008 R2 - No internet access with static IP
should not be a firewall issue, since internet works when I let the DHCP server assign an address. I am started to suspect an IP conflict, but I do not have any idea how that would be possible in our environment. Or maybe the DNS server is confused by the new network card, but I doubt that is the problem, since the all NIC was behaving similar.
Apr
7
comment Windows 2008 R2 - No internet access with static IP
The Windows Firewall is completely off. The Juniper is technically a firewall but acts as DHCP server.
Apr
7
comment Windows 2008 R2 - No internet access with static IP
Will try to rejoin to the Domain shortly. See if that tell use anything. We have reboot the entire network many times to try to resolve the issue. I don't think it is caching. We rebooted the Domain, Firewall, switch and client PC
Apr
7
comment Windows 2008 R2 - No internet access with static IP
We have a juniper firewall, a managed switch and a domain controller. I wish it was something simple like wrong gateway, but that is all correct and verified. The juniper firewall controls the DHCP, static IP are below 100 and very tightly controlled. We only have about 8 server and a handful of other devices.
Apr
7
comment Windows 2008 R2 - No internet access with static IP
yes, this is all correct. the setting are the same as we have used on this machine for years. Firewall is completely off.
Apr
7
asked Windows 2008 R2 - No internet access with static IP
Jun
19
awarded  Scholar
Jun
19
awarded  Student
Jun
19
accepted Can the Hyper-V role be installed on Windows Server 2003?
Jun
19
comment Can the Hyper-V role be installed on Windows Server 2003?
My former boss put two Hyper-V domain controllers on the same box. I was wanting to move one to another machine and we have a 2003 server with raid that is capable of running the backup domain controller, but I guess this is not an option. Thanks.
Jun
19
asked Can the Hyper-V role be installed on Windows Server 2003?