Reputation
14,833
Top tag
Next privilege 15,000 Rep.
Protect questions
Badges
1 23 56
Newest
 Caucus
Impact
~630k people reached

Oct
22
revised Cannot join CIFS server to a active directory domain
added 6 characters in body
Oct
22
answered Windows 2003 registry corrupt - endless reboot
Oct
18
revised IBM x3200 M3 - RAM compatibility
deleted 201 characters in body
Oct
18
revised Server memory configuration after upgrade
deleted 126 characters in body
Oct
18
revised HP Proliant DL320 G5 Memory Registered or Unregistered?
deleted 130 characters in body
Oct
18
revised Multibit error encountered on Dell Server Memory
deleted 44 characters in body
Oct
18
answered Can you auto-invite new members of a distribution list to a meeting?
Oct
18
comment Everything says Applocker is supposed to work: Why doesn't it?
Also, you can set your Group Policy that contains your AppLocker rules to also start the Application Identity service.
Oct
18
comment Everything says Applocker is supposed to work: Why doesn't it?
Look in the event log under Applications and Services Logs -> Microsoft -> Windows -> AppLocker. In those logs you should see allowed/denied message, and also "The AppLocker policy was applied successfully to this computer.".
Oct
17
reviewed Approve bind proftpd only to localhost
Oct
16
answered Hyper-V Role Space Usage on Windows Server 2008
Oct
15
answered How to create a consistent backup of an application (database and files on a disk)?
Oct
12
comment Properly remove windows.old on Hyper-V Server 2012 R2
What was the contents of junc.Txt? Can you post it to pastebin? I'm curious if anything of interest was linked.
Oct
12
comment Juniper 802.3ad Link between Switch and Router 3x link issue
Try enabling tracing to see what is happening during negotiation. See juniper.net/techpubs/en_US/junos/topics/usage-guidelines/…
Oct
11
revised How do I check if server really has RAID 10 enabled?
added 8 characters in body
Oct
10
comment No “Trusted Execution” on Xeon E5540, what am I missing?
FYI- Trusted execution does not "enables the OS to mark data as non-executable". That is Data Execution Prevention and the NX bit. Trusted Execution uses code signing to verify that only authorized code is allowed to be loaded and executed.
Oct
10
answered zfs on a single device: what happens when a file is corrupted?
Oct
8
comment Migrate 2-drive RAID1 Hyper-V host (4 VMs) to 4-drive RAID6
1) install hardware raid controller, connect to just 2 drive bays. 2) insert 2 new drives. establish mirror. 3) in windows drive management, make this new raid volume a mirror of your existing s100 array. 4) when mirroring is complete, power off the server and remove the s100 drive. 5) power on to make sure it works. 6) power off and connect all drive bays. 7) add additional drives and reconfigure array to RAID10. (this could be done in many different ways, including using a linux USB drive to copy from the old to new array.)
Oct
7
comment Migrate 2-drive RAID1 Hyper-V host (4 VMs) to 4-drive RAID6
A hardware controller does everything in hardware. A software controller is usually a feature of the operating system. A host based controller is a fairly standard disk adapter but it runs specialized software that performs the raid operations using the computer's processor. This is also called fake raid. The s100 is a fake raid controller. If you can install a hardware controller that would be a good idea since you are using such large drives. Note that you might not be able to just swap the controllers without erasing the disks so make sure you have a backup.
Oct
7
revised Migrate 2-drive RAID1 Hyper-V host (4 VMs) to 4-drive RAID6
edited body