6 reputation
2
bio website
location
age
visits member for 1 year, 5 months
seen Dec 2 '13 at 17:04

Jul
7
awarded  Student
Jul
7
awarded  Custodian
Jul
7
reviewed Approve Poor performance when migrated Fast Ethernet to Gigabit network
Jul
7
comment Poor performance when migrated Fast Ethernet to Gigabit network
So what is "auto" of the autonegotiation? :)
Jul
7
comment Poor performance when migrated Fast Ethernet to Gigabit network
The counters are: Rx Drops: 1237 Rx CRC/Alignment: 1237 Rx Fragments: 1156 all other error counters are 0
Jul
7
comment Poor performance when migrated Fast Ethernet to Gigabit network
The cable between the server and the switch is about 3 meters and they are in the same room. I've changed it 3 times.
Jul
7
comment Poor performance when migrated Fast Ethernet to Gigabit network
On the switch side the server port is set to 100Mbps FDX. On the computer side the port is set to atonagotiation. All cables are brand new and the main switch too. If everything is in autonagotiation transfer between 100Mbps and 1Gbps clients is very slow, so I force server to be 100Mbps and every computer that use accounting software also to be 100Mbps because when they are 1Gbps the loading of the .exe file (about 11MB size) from the mapped drive is about 1-2 minutes but when change to 100Mbps the load time is just 1-2 seconds.
Jul
7
asked Poor performance when migrated Fast Ethernet to Gigabit network