1,834 reputation
1437
bio website
location
age
visits member for 4 years, 11 months
seen 2 hours ago

Nov
5
comment Complete Public Folder Migration from Exchange 2007 to Exchange 2010
true whatever works is best ... Only if outlook could be scripted to export them , one could batch it for the rainy days ... Or if Microsoft could right click export as PST all public folders that would be a life saver too.
Nov
5
comment Complete Public Folder Migration from Exchange 2007 to Exchange 2010
Oops just read your last comment :-) sorry
Nov
5
comment Complete Public Folder Migration from Exchange 2007 to Exchange 2010
Can you still see all of your public folders in MS Outlook with an Exchange admin mail profile ? If yes, then do a PST Export of all your public folders from there and import them back into your Exchange 2010. At least you will save your data that way.
Nov
5
comment NetApp and Hyper-V 2012 best practice/whitepapers?
Also read this - might be helpful : netapp.com/templates/…
Nov
5
comment Multiple DNS names and IP address to make load balancing more efficient in an Exchange CAS Array
A cas array have one or usually more then one cas servers as its members ... A cas array is created per active directory site ... So setup another cas server .. join it to your cas array..give your cas array a local DNS name and point it to your virtual ip. Out a hardware load balancer ..so your clients would hit the VIP of your cas array and load balancer will balance traffic on the members
Nov
4
comment bridged connection for windows 7 host and ubuntu guest in vmware player
Yes It would require elevated privileges once it is being installed but I haven't faced an issue with that. What are your concerns ? Just asking to understand as to why you are staying away from Virtualbox :-)
Nov
4
comment bridged connection for windows 7 host and ubuntu guest in vmware player
VB Needs root privileges for ? Your host OS is windows 7, you can install it if you are the local admin of the machine. Just curious so I asked :-)
Nov
4
comment iPhone ActiveSync issue
Before you do the following have you tried connecting to your exchange via an iPad / iPhone from outside your network? : On Your ASA 5510 - have you got ESMTP inspection checked ? I haven't faced the exact issue but have seen some environments suffer due to that - and they told us to uncheck it. If you can, try un-checking ESMTP inspection and see if that helps ? -
Nov
1
comment PFsense VPN all types failing?
I had faced an exact same issue about a month ago...I read some where on pfsense forum that its the 64 bit version which has a issue, I then installed 32 bit pfsense and all waswell. Give that a go n see if that works
Nov
1
comment How to keep track of the serverconfiguration: keep entire “/etc” in git
Some more useful suggestions and ofcourse etckeeper is mentioned too unix.stackexchange.com/questions/29117/…
Apr
26
comment Broadcom BCM5709C Jumbo Frames on Windows 2008R2
@ Wesley, Thank you, I always build servers after downloading all drivers from Dell Support site or from vendor downloads site, this time this was build by another techie in our team and he missed this part - my fault, i should have told him :-) Now I have another question, I have a Cisco 2960 and I want to enable JUMBO Frames on this switch, its a global config command that enables jumbo on all switch interfaces, does that mean that if a client is connected with default MTU of 1500 on this switch, it won't be able to talk to my jumbo nics ?
Apr
26
comment Broadcom BCM5709C Jumbo Frames on Windows 2008R2
Hi Wesley, Thank you for your response - I downloaded the Broadcom BCM5709C drivers off the broadcom site and installed, Now I CAN see JUMBO Frame setting in NIC properties, will verify this in BACS 4 too, I am sure it will be there...I installed it on one of the server and it went fine without even re-configuring the nics so that is good it retained all config of the nics. - Thanks so much !
Apr
26
comment Broadcom BCM5709C Jumbo Frames on Windows 2008R2
hi joewerty, yes I had already looked in NIC properties to see if i can set the mtu / jumbo frames from there.
Apr
25
comment Broadcom BCM5709C Jumbo Frames on Windows 2008R2
It's a Dell R610, so basically these aren't quad-port instead 4 x DUAL Port Adapters (giving my server 8 NICs) ? right ? I will check the appropriate drivers for these from dell website and update them....thanks and I will report back ! :-)
Apr
25
comment Broadcom BCM5709C Jumbo Frames on Windows 2008R2
thank you for your prompt response, I have attached an image from BACS 4.0 - ur suggestion would be v.helpful !
Mar
20
comment Replicate / SYNC / Copy thousands of files
@SvenW, I mapped the existing LUN to my new box, however I have read that it is not a good idea to map a single lun to two hosts (unless in a cluster - which my servers are not) so I have unmapped it now, even though I was only reading from it. Whoever have down-voted this question, please understand that not everyone here comes without a research, My question intended towards people who deal with terabytes of text files and may have had to move it around, so was looking forward to those suggestions.
Mar
20
comment Command-Line folder structure on Windows
Hi James, Thank you for your response, they were helpful. Now I have successfully created the desired folder structure / skeleton of 25,800 Folders (thats including top-level and sub-folders inside them) :-) but they are all empty :-) How or which method would you suggest to fill these folders from the original structure ? I am now tinkering with robocopy switches and an initial test revealed that when I used the /COPYALL switch with source as original structure to the newly created empty structure, nothing got copied - strange ? will look forward to your reply.
Mar
20
comment Replicate / SYNC / Copy thousands of files
why down-vote? - it is a legit / proper question :-)
Mar
19
comment Command-Line folder structure on Windows
I have a folder structure (a standard) where we have a user name and then 8 folders within that username, there can be numerous folders within those sub-folders too. I have the folder structure on a source at the moment but i has around 8TB of Data inside it (text files, indesign files, ps files) what I want to do is to basically create an exactly same DIRECTORY structure without actually copying the content of those folders. I tried your robocopy command - it copied some files with 0KB but no directories - will be most grateful for your help !! Thanks for your help
Mar
19
comment Command-Line folder structure on Windows
Hi Tonny, dir /ad > output isn't helpful as it lists date as well, can you please provide me with a command which will output an existing structure to a text / csv file and then a command which will allow me to re-create it on as many servers as I want to, I have around 8000 folders in all but one directory have around 1200 folders and then subfolders within them - will be most grateful