Reputation
1,658
Top tag
Next privilege 2,000 Rep.
Edit questions and answers
Badges
8 15
Impact
~157k people reached

  • 0 posts edited
  • 0 helpful flags
  • 69 votes cast
Jan
25
comment Site to site VPN between Cisco VPN Router and Sonicwall NAT issues
I believe your problem is because both sides are in the same 10.0.0.0/24 subnet. The devices wouldn't know to route to the other side. Is it possible to renumber the IPs on one side? If not, could you use multiple /30 IP subnets just for the devices as the local and remote subnets, and then have static routes to get to the other side via the /30s?
Jan
25
comment Haproxy SSL offloading
No problem, I'm glad it was an easy one. I added my comment as an answer if you want to mark it to close this out.
Jan
25
answered Haproxy SSL offloading
Jan
24
comment Haproxy SSL offloading
Is it possible these requests you see are just multiple HTTP requests to load the page? I believe the roundrobin balance will have each separate request go to a different backend server. If you wanted a user to only interact with a single backend server at a time, I think you'd need to look into persistence. As another possibility, could you be seeing the backend server checks in the logs?
Jan
22
awarded  Popular Question
Dec
9
comment Haproxy Server Statistics page reads server DOWN
You should post up your HAProxy config then. You probably just need to remove the server from the config.
Dec
5
comment Haproxy Server Statistics page reads server DOWN
Is this a server that is actually down, and you want to remove it from the HAProxy config file, or is this a server that is functioning correctly, but HAProxy believes is down?
Sep
24
comment Routing between subnets on different vlans connected by a router/firewall
What else do you have configured on the Vyatta so far? Also, can you post example net settings for a sample host on both sides (ip addr, netmask, gateway)?
Aug
23
answered Cisco port down and notconnect after changing port speed
Jul
12
answered Event ID 4013: “The DNS server is waiting for Active Directory Domain Services (AD DS) to signal…"
Jun
29
comment How to interconnect 2 switches (Cisco/Dell) with trunks
@Disco - Yes, you can configure both of those links the same way, and then you'll get some redundancy, too. However, it's very important that spanning-tree (STP) be running on those switches (should be by default), otherwise you would create a loop. Some form of show spanning-tree on each switch will probably give you more details.
Jun
29
comment How to interconnect 2 switches (Cisco/Dell) with trunks
@Disco - You need switchport trunk native vlan 10 on the port. By default, the native VLAN is 1 on the Cisco switch. Otherwise, you would want to specify the native VLAN as 1 on the Dell as well for that to work as is (10 and 20 would then be allowed). The important piece of info to know is that when you set up a trunk link, it runs several VLANs over that same link between the switches.
Jun
27
comment Where do Outlook folders go when moved?
@balexandre - It's definitely in there somewhere, unless you deleted it from Deleted Items (in which case you'll definitely need to do a restore). If you're having trouble seeing it, you could try searching the entire mailbox for an e-mail you know should be in that folder to confirm that it's still there.
Jun
22
answered Maximizing TCP connections on HAProxy load balancer
Jun
22
comment Maximizing TCP connections on HAProxy load balancer
Where are you getting a 64K limit from? Is that a limit for one of your app servers?
Jun
20
comment Etherchannel between Cisco 3750 and Dell 5424 and Dell 5324
I can't say anything about those particular pairings, but I have several lag connections between HP Procurve 3500's and Dell 5448/5548/3548 switches without any issues.
Jun
12
comment Layer 3 switch routing
@Yoshiwaan - Have you tried running a traceroute to be sure of where it drops off? I would do this from both a client, and from the PowerConnect using a source of VLAN 2 and/or 4.
Jun
8
awarded  Constituent
Jun
8
awarded  Caucus
Jun
5
comment SCCM cannot connect to SQL
Can you connect using the exact same SQL server settings in management studio? When you say your account is a sysadmin, you mean your SQL login on that server has the sysadmin SQL role, right?