171 reputation
19
bio website csh.rit.edu
location Rochester, NY
age 31
visits member for 4 years, 3 months
seen Aug 6 at 19:52
Systems administrator for Computer Science House at the Rochester Institute of Technology.

Jun
19
comment Apache 2.4 + SVN authz authentication with mixed authenticated/anonymous access
Poking around in mod_authz_svn's source, it's looking like it has a hard dependency on ap_satisfies(r) == SATISFY_ANY. I think that means it isn't supported outside of mod_access_compat, but I'll leave the question up for a while if someone else can think of something.
Jun
19
comment Apache 2.4 + SVN authz authentication with mixed authenticated/anonymous access
I had tried that - <RequireAny>Require valid-user</RequireAny> is what I tried, which doesn't really make a lot of sense, but its all I can attempt.
Jun
19
comment Apache 2.4 + SVN authz authentication with mixed authenticated/anonymous access
I can, I just don't want to. If Apache has changed the auth/access model, I want to find out how to do things in the new model.
Jun
17
comment What is the easiest way to upgrade my existing Perl 5.14 to Perl 5.16 on FreeBSD 9 using the ports system?
It doesn't seem to find anything to move anymore. I run it and nothing shows up. Also, it looks like it's not provided in the ports anymore. I'll admit, it's not something I've given much attention.
Sep
7
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
As for the procedure, we had been trying desperately to boot it in the original machine - leaving it on, leaving it off, booting multiple times with power on, booting multiple times with hard-power-off between boots, reseating it, switching slots. Finally we pulled it out of the Silicon Mechanics machine and stuck it in the Fedora machine. From what I remember going on, we only had to boot it once for the OS to be able to read it, twice to get the BIOS to kick back in. You'll want to play with power - leaving it out of the machine for a while, leaving it on in the machine for a while, etc.
Sep
7
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Checking through the Fedora releases, it was probably 12 or 13, likely 12, given that the machine we brought it to life in was a freshly installed machine. I don't remember anything about what drivers were installed, but they would've been whatever was available at the time.
Apr
30
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Thanks for the input, we did try to re-seat the card many times, tried difference pcie slots, etc, all to no avail.
Apr
29
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Ahh, google-fu needed some tweaking - mjmwired.net/kernel/Documentation/MSI-HOWTO.txt
Apr
29
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Thanks, that's encouraging to hear. We're buying the exact same card we had before, don't want to change up anything unless we really have to.
Apr
29
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Also, what do you mean by 'enable MSI'? That's not a bios option i'm familiar with. We're using PhoenixBIOS on the mainboard, if it's any help.
Apr
29
comment Experience with AMCC 3ware 9650se raid cards? Ours seems dead
Yeah, this is what we see: "09:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID PCIe (rev 01)". That said, the fact that the drives dont' start and the card's bios doesn't show up during boot isn't very encouraging.