11 reputation
1
bio website
location
age
visits member for 4 years, 6 months
seen May 27 '10 at 12:42

May
10
comment Altq limits not being applied to UDP transfers
I've tried specifying "proto { udp, tcp }", though it didn't do any difference. Will try to run separate them separately (i.e. try with only tcp enabled, then only udp enabled) and see what happens.
May
9
asked Altq limits not being applied to UDP transfers
May
8
comment Inaccurate bandwidth limiting in altq queues
There should indeed not be two default queues; I was testing some different rule setups when setting this up, and modified the current rules I had to what I originally had (I forgot to remove the default parameter from the low-queue). Will look into RED to see if it will solve this. By the way, any ideas regarding why the queues only are applied to TCP connections? The 0Mb limit was basically just there due to that I only wanted to test with one queue; I could indeed only have one queue, though I wanted to test altq with different queues, but did first want to try it for only one queue.
May
7
awarded  Student
May
7
asked Inaccurate bandwidth limiting in altq queues