545 reputation
319
bio website waldbeatle.com
location Germany
age 32
visits member for 4 years, 6 months
seen Nov 25 at 6:28
Ich bin root also darf ich das :-)

Dec
10
comment How can I delay sshd login after bad password
What OS you use?
Dec
10
suggested rejected edit on What “PAL Shim AllocRequest returning NULL” meens?
Dec
9
comment PXE DHCP configuration with existing DHCP server
To configure DHCPProxy you should use dnsmasq. But the better way is to split into VLANs and then use DHCPproxy, I think.
Dec
9
revised PXE DHCP configuration with existing DHCP server
added 240 characters in body
Dec
9
asked What “PAL Shim AllocRequest returning NULL” meens?
Dec
9
comment PXE DHCP configuration with existing DHCP server
Yes you can use a proxy DHCP but if your Client request a DHCP Ticket the lease come from the closest DHCP Server, it is possible that your client get a DHCP Lease from the first DHCP Server and not from your proxy. So you should set a VLAN for your PXE Environment and all your PXE Clients get the right Lease from your proxy (who forward the request to the primary DHCP)
Dec
9
answered PXE DHCP configuration with existing DHCP server
Dec
9
comment How to set up a pacemaker cluster for active/active scenario and how it works?
Thx for your answer, I know that the data must be the same for active/active scenario but at this time I only want to build this scenario to understand how it works.
Dec
9
comment How to set up a pacemaker cluster for active/active scenario and how it works?
You're right, there is no group configured. Now I get the same status for both. Can you also explain how the active/active scenario works?
Dec
5
awarded  Cleanup
Dec
5
revised How to set up a pacemaker cluster for active/active scenario and how it works?
rolled back to a previous revision
Dec
5
revised How to set up a pacemaker cluster for active/active scenario and how it works?
deleted 76 characters in body
Dec
5
asked How to set up a pacemaker cluster for active/active scenario and how it works?
Dec
4
comment Detect HP ML370 G5 Bad disk in RAID0
If the ACU doesn't show errors you can try to copy your data to another system and change the RAID Level away from RAID 0
Dec
4
comment Detect HP ML370 G5 Bad disk in RAID0
You can do a drive physical test with knoppicillin for example, do a dd copy of this drive at first and then do a physical fitness test but not beyond the raid controller.
Dec
4
comment Detect HP ML370 G5 Bad disk in RAID0
You can try to copy (dd) the drive to the new one
Dec
4
comment How to connect more than one telnet session to Cisco router ( Port Com10 )?
In my answer there is a link to a Tutorial for setting up a Management VLAN
Dec
4
answered How to connect more than one telnet session to Cisco router ( Port Com10 )?
Dec
4
comment Detect HP ML370 G5 Bad disk in RAID0
If you have S.M.A.R.T. Errors on this drive you should change the Drive.
Dec
4
revised Detect HP ML370 G5 Bad disk in RAID0
added 278 characters in body