45,364 reputation
16110179
bio website http://яѱ.com
location Sydney, Australia
age 29
visits member for 5 years, 9 months
seen 25 mins ago

I wear many hats at my workplace.

Primarily a Database Developer, but also programmer, web designer, DBA, sysadmin, and general office bitch.

I work for a small custom software house in Sydney, Australia. We use all manner of tools - but mainly MSSQL and a Rapid Application Tool called eDeveloper uniPaaS Magic XPA.


1h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
added 309 characters in body
2h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
edited title
2h
comment Need to set up domain/subdomain using NGINX
As Florin said - you need to set this up in your DNS. There is no "code" or "programming" to do this. It's a configuration option. We cannot answer how to do this because it entirely depends on where your DNS is configured.
3h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
Previous version had a red herring about HTTP. My initial tests were faulty and were giving me incorrect data. This no longer seems protocol dependent.
3h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@GregL no luck I'm afraid, same story. However I have concluded this morning that my initial tests were faulty, and it does not seem to be isolated to SMB, as with a different (more accurate) test, I can now reproduce this issue over HTTP. I've removed the HTTP red herring from my question now.
3h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
Previous version had a red herring about HTTP. My initial tests were faulty and were giving me incorrect data. This no longer seems protocol dependent.
16h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@MichelZ yes. At least I damn well hope so - Server 2012 R2 and Windows 7 at either end.
16h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@joeqwerty that calculator is great. When I'm back in the office tomorrow I'll muck around and see what's what. Right now it looks like my total packet size is going to be 1536 bytes, which is too big.
16h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@MichelZ I have. Tried lots of different source/destinations with the same result
16h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@joeqwerty well the problem probably did occur before the upgrade, but because it was a 10/10 link it was by coincidence capping out at the maximum available bandwidth anyway.
19h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
added 371 characters in body
19h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
@joeqwerty The devices at both ends of the tunnel show 0 errors, 0 pause, a handful of underruns and nothing particularly out of the ordinary anywhere else.
20h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
1394 is the largest MTU that I was able to get through.
20h
comment 20Mbps WAN limited to 10Mbps over IPSec Tunnel
Good point. It's 9000 on both the switches at either end, 1500 on the server and clients themselves, and 1480 on the VDSL portion of the link. That's the only portions of the links that I control.
21h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
added 77 characters in body
21h
revised 20Mbps WAN limited to 10Mbps over IPSec Tunnel
added 121 characters in body
21h
asked 20Mbps WAN limited to 10Mbps over IPSec Tunnel
22h
comment infiniband network between 3 servers
Which I also mentioned - chaining them off each other. Never having used infiniband I wasn't sure if that was actually possible though, but then the nodes in the middle of the ring become a "switch" anyway. Maybe not a device sitting in a rack, but they still switch packets between nodes on the network.
23h
comment infiniband network between 3 servers
Not sure what was wrong about my answer? I told him that he has to use a switch in the last paragraph.
1d
revised How to install terminal application after installing minimal desktop Unity on Ubuntu Server
edited body