Reputation
49,070
Next tag badge:
99/100 score
31/20 answers
Badges
21 126 204
Impact
~3.4m people reached

Nov
25
comment How to get around Double NAT from the ISP?
@MichaelHampton sure, which is why I have added might. Because in double nat, who knows. Also I've had so many problems with IPSec over NAT I basically just don't do it any more.
Nov
25
answered Windows Server 2012 using wrong IP address for replication
Nov
25
comment Windows Server 2012 using wrong IP address for replication
One of the problems you're going to have @ProfessorJV is that you can't define your sites properly, because you have the same subnet in both locations and multi-homed DCs. Multi-homed DCs are normally a no-no. Whilst they can be made to work, it's usually not worthwhile. But multi-homed where each DC sees the same two subnets when they're actually different subnets? That's wayyyyy out there in terms of deployments.
Nov
25
revised Windows Server 2012 using wrong IP address for replication
added 6 characters in body
Nov
25
comment Windows Server 2012 using wrong IP address for replication
Oh man, this is only going to be the start of your nightmares. A shared AD infrastructure means that you're going to have ton of A records in your DNS that are just going to be pointing to the wrong place. Update an A record on Site A and Site B will get the same record, but that IP is likely to be for a totally different service. Renumber one of those networks as soon as you practically can! You can't even set up Active Directory Sites and Services properly, because that uses subnets to infer the site.
Nov
25
comment LACP : Cisco ASA 5515 & Switch ProCurve 2920
I'm fairly sure that this is not a supported configuration from Cisco. Cisco documents typically have each ASA going into one switch only, and then stacking or uplinks on the switches. Then you configure the ASA to poll over a dedicated FO interface to detect device or interface failure, and then you have another poll set up to poll the devices over the switching interfaces. This will then allow the ASAs to fail over in the event of a switch OR ASA failure.
Nov
25
answered How to get around Double NAT from the ISP?
Nov
25
comment Can Logstash, ElasticSearch and Kibana be used to log http requests?
@AndréBorie sure. The stats about the kind of traffic you can find here (although I think it's a bit outdated now). Our ELK cluster is not the one from that page though (that's for searching the sites). We have six ElasticSearch boxes for logging, each with 2x E5-2660, 192GB of RAM and 43.65TB of usable storage. However that's also used for a bunch of other logstashing stuff, not just HTTP.
Nov
25
revised Chrome makes way too many requests (~22000) while downloading MP4 video (~34MB)
added 98 characters in body
Nov
25
revised SSL Certificate non-www not working
RFC 2606
Nov
24
comment Can Logstash, ElasticSearch and Kibana be used to log http requests?
Absolutely. We have a multi-TB ELK instance for our HTTP requests.
Nov
24
comment Why is ESXi 5.5 slower than 4.1?
@Pablo Hmm, that is odd. VMWare Converter does not usually get the same deliberate speed cripple that scp gets...
Nov
24
answered Why is ESXi 5.5 slower than 4.1?
Nov
24
revised Port number being added to WordPress admin after Varnish install
deleted 7 characters in body
Nov
24
comment MikroTik Configuration - Add a Public Wireless Router (internet only) to Office LAN
If you wanted to take this a step further and have some users that do have access to internal resources, and your WiFi access point supports it (I haven't researched that device), you can create a 2nd SSID using, say WPA2-Enterprise, and pop it on the internal VLAN, or put it onto another different VLAN and allow some firewall rules so that it can access the internal network if you wanted to.
Nov
24
answered How Can I Have 1 Device Ignore Cisco Default Route?
Nov
24
revised How Can I Have 1 Device Ignore Cisco Default Route?
added 12 characters in body
Nov
24
comment How Can I Have 1 Device Ignore Cisco Default Route?
@joeqwerty Well, it can, but not directly (so, not as a default gateway, but it should be able to get to it). It would need to have a default gateway on its network that has some sort of policy route to point it to the other building.
Nov
20
revised Exchange MoveRequest stalled: TotalStalledDueToCIDuration
added 3 characters in body
Nov
20
awarded  Popular Question