I've started Websphere on my local box and I can't remember what port the admin app should be on. Any ideas?
3 Answers
Its usually 9060 for http and 9043 for https.
-
2Be careful if you use RAD or RSA. Both install more than one server, so the ports may differ. Jan 18, 2010 at 15:42
There are several files (two of them look like reliable sources) in your WAS-profile that you can check (I used the paths from my installation, which uses mostly the standard settings):
- {WAS-Profile-Path}\logs\AboutThisProfile.txt
- {WAS-Profile-Path}\config\cells{cellname}\nodes{cellManagername}\serverindex.xml And look for WC_adminhost_secure or WC_adminhost.
The first one is easier since it is the smaller file. However, the second one is the actual configuration file. If you can't find the files. Search for a file that contains WC_adminhost or WC_adminhost_secure.
-
searching
serverindex.xml
forWC_adminhost
showed the port I needed. Jul 22, 2014 at 15:36
Use netstat
to get a list of the open ports; netstat -ltnp
will give you listening ports with the process that has them open; it should be obvious where it is from there.