tail -f and then exit on matching string

Question

I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string.

I have simplified to the following test case.

test.sh is listed below:

#!/bin/sh    
rm -f child.out
./child.sh > child.out &
tail -f child.out | grep -q B

child.sh is listed below:

#!/bin/sh
echo A
sleep 20
echo B
echo C
sleep 40
echo D

The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help.

Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

Answer 1

Something like this?

mkfifo child.fifo
tail -f child.out > child.fifo &
pid=$!
grep -q B child.fifo && kill $pid

in full:

#!/bin/sh    
rm -f child.out
./child.sh > child.out &
mkfifo child.fifo
tail -f child.out > child.fifo &
pid=$!
grep -q B child.fifo && kill $pid
rm child.fifo

Seems to run in 20 seconds.

$ time ./test2.sh

real    0m20.156s
user    0m0.033s
sys     0m0.058s

UPDATE

This way seems to work too:

#!/bin/sh
rm -f child.out
./child.sh > child.out &
(tail -f child.out | grep -q B child.out)

And if you're seeing it exit immediately sometimes, try adding a sleep 1, i.e.

#!/bin/sh
rm -f child.out
./child.sh > child.out &
sleep 1
(tail -f child.out | grep -q B child.out)

Answer 2

All on one line, replace 'do foo' with command'

# service tomcat6 start
# tail -f /var/log/tomcat6/catalina.out | awk '/Server startup/{system("do foo"); exit 0}'

Answer 3

Lose the tail. Since you start with an empty child.out, you do not need it and (as you have found) it complicates matters. Just grep for the first instance in a sleep loop.

until fgrep -q "Server startup" child.out; do sleep 1; done

If you do need to keep the tail because you do not always start with an empty catalina.out, place the tail inside the loop:

until tail child.out| fgrep -q "Server startup"; do sleep 1; done