Possible for linux bridge to intercept traffic?

Question

I have a linux machine setup as a bridge between a client and a server;

brctl addbr0
brctl addif br0 eth1
brctl addif br0 eth2
ifconfig eth1 0.0.0.0
ifconfig eth2 0.0.0.0
ip link set br0 up

I also have an application listening on port 8080 of this machine. Is it possible to have traffic destined for port 80 to be passed to my application? I have done some research and it looks like it could be done using ebtables and iptables.

Here is the rest of my setup:

//set the ebtables to pass this traffic up to ip for processing; DROP on the broute table should do this
ebtables -t broute -A BROUTING -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP

//set iptables to forward this traffic to my app listening on port 8080
iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 8080 --tproxy-mark 1/1
iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1/1

//once the flows are marked, have them delivered locally via loopback interface
ip rule add fwmark 1/1 table 1
ip route add local 0.0.0.0/0 dev lo table 1

//enable ip packet forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

However nothing is coming into my application. Am I missing anything? My understanding is that the target DROP on the broute BROUTING chain will push it up to be processed by iptables.

Secondly, are there any other alternatives I should investigate?

Edit: IPtables gets it at nat PREROUTING, but it looks like it drops after that; the INPUT chain (in either mangle or filter) doesn't see the packet.

Answer 1

I have decided to keep the bridging behaviour. I will use ebtables to block traffic that I want to intercept and have my app use raw sockets to intercept these packets. Seems like a bit of a kludge, but appears to work.