1

i'm looking for this information for a few hours on the web but i still can't find the answer.

I have a few HP2610 switches (no stacked) and i want to assign all VLANs to switches interconnection ports. That means that i want all my number 23 ports to belong to all VLANs, in a tagged manner.

It was pretty simple to do that on a cheaper switches i worked on before and i'm amazed that i should do that manually on each vlan i define on hp procurve switch.

Thanks for any help ! Alex

Improve this question
2
  • 1
    Do you mean that you want to set up a trunk port?
    – joeqwerty
    Jan 4, 2013 at 15:37
  • Not really a trunk port, since a trunk port, according to hp terms, is an aggregation of a few ports (lacp ...). I just want configure an assignation all vlans <-> one tagged port
    – Alex T.
    Jan 6, 2013 at 18:43

2 Answers 2

Reset to default
2

You can only allow defined vLANs on particular ports. So you have to define the vLANs first, then assign them as tagged to port 23. This is a little different from Cisco switches where you only have to define the vLAN, and by default all ports can use all vLANs.

Improve this answer
0

When you put all the vlans on a specific port this is actually called tagging on HP switches. You tag all the vlans you require to be passed through on the specific port. I believe this is what joeqwery was trying to say when he mentioned trunk port which is what it's called on Cisco switches.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .