0

I am working on Ubuntu server 12.04

I have asterisk working. I set the port 5060 as this: 

     iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
        iptables -A INPUT -p udp --dport 5060 -j ACCEPT
   iptables -A FORWARD -o eth0 -p udp --dport 5060 -j ACCEPT

On the client side I have error 408 Registring (Request timeout)

There is no port blocking on the client side.

ON the server side when running

asterisk -vvvvvr , using set sip debug on

there is no message that the server is having a request from a client.

What to do? Need some help. Thank you!

In case you ask: In sip.conf I did specify:

bindport=5060
bindaddr=0.0.0.0

netstat -plunt

:

...
udp        0      0 0.0.0.0:4520            0.0.0.0:*                           1002/asterisk   
udp        0      0 0.0.0.0:5060            0.0.0.0:*                           1002/asterisk   
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           1002/asterisk

UPDATE:

When checking with nmap -v -sU IP -p 5060 and I get:

Host is up (0.060s latency).
PORT     STATE         SERVICE
5060/udp open|filtered sip

Ouput rules are:

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     all  --  any    lo      anywhere             anywhere            
 3074  938K ACCEPT     all  --  any    any     anywhere             anywhere            state NEW,RELATED,ESTABLISHED

THE SOLUTION FOR SIP IS THIS:

http://www.voip-info.org/wiki/view/Asterisk+firewall+rules

Improve this question

1 Answer 1

Reset to default
-1

You should add some port:

Port 5060 TCP and UDP 
Port 5004 UDP 
Port 10000 UDP (sipgate Stun service - usually 3478/9) 
Ports 16348-32768 UDP (RTP, RTCP multimedia streaming)

Your asterisk configuration wrong, refer here for more details.

Improve this answer
11
  • for media I did add 10000-20000 udp, i also have tcp on 5060
    – just ME
    May 22, 2013 at 11:52
  • I 've checked if the port is open using telnet, but i get a connection timed out.
    – just ME
    May 22, 2013 at 12:13
  • port 22 is open, but port 5060 seems to be closed though i've set the port to be opened. can u help?
    – just ME
    May 22, 2013 at 12:14
  • Check your asterisk configuration.
    – cuonglm
    May 22, 2013 at 12:14
  • THe asterisk configuration are fine, case I ve tested them on my local computer + the sip modules are loaded. I've also checked that.
    – just ME
    May 22, 2013 at 12:15

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .