I would like to install XenServer 6.2 (kernel 2.6.32) on a raid5 managed by a 3ware 9750 controller. The XenServer installer doesn't recognize the raid5 and i think i have to load a driver for the 3ware 9750 4i controller.
I found a download here
but there is only source code in this archive. I have no suitable machine to compile this driver.
Is there any way to get the new server installed without compiling the driver on another machine?
UPDATE 2013-08-24:
I load the DDK VM as mentioned in the answers. It was possible to run make
against the module sources (3w-sas-2.6.32.tgz see download) and ended up with these files:
-rw-r--r-- 1 root root 268 Aug 24 09:02 .3w-sas.ko.cmd
-rw-r--r-- 1 root root 30573 Aug 24 09:02 .3w-sas.mod.o.cmd
-rw-r--r-- 1 root root 38796 Aug 24 09:02 .3w-sas.o.cmd
drwxr-xr-x 2 root root 4096 Aug 24 09:02 .tmp_versions
-rw-r--r-- 1 8004 345 60502 Dec 3 2009 3w-sas.c
-rw-r--r-- 1 8004 345 14029 Dec 3 2009 3w-sas.h
-rw-r--r-- 1 root root 266688 Aug 24 09:02 3w-sas.ko
-rw-r--r-- 1 root root 3611 Aug 24 09:02 3w-sas.mod.c
-rw-r--r-- 1 root root 57960 Aug 24 09:02 3w-sas.mod.o
-rw-r--r-- 1 root root 209900 Aug 24 09:02 3w-sas.o
-rw-r--r-- 1 8004 345 393 Dec 3 2009 Makefile
-rw-r--r-- 1 root root 730 Aug 24 09:02 Makefile.xen
-rw-r--r-- 1 root root 0 Aug 24 09:02 Module.symvers
-rw-r--r-- 1 root root 44 Aug 24 09:02 modules.orde
I'm not shure how to build a XenServer Driver Repository. Additional the documentation tells to compile a module for kdump too. I don't know how to do that.