41

I'm trying to modify /etc/ssh/sshd_config on my dedicated debian7 server with both AllowUsers and AllowGroups. However I can't seem get both to work together.

The Setup

  • There's a user called testuser.

  • That user is in a group called ssh-users: 

    $ groups testuser
testuser : testuser ssh-users

  • testuser is trying to connect via ssh testuser@<server_ip> and entering their password.

  • My sshd_config can be found here: http://pastebin.com/iZvVDFKL - I think basically the only changes I made from default was:
    • to set PermitRootLogin no
    • and add two users with AllowUsers (actual usernames differ on my server)
  • service ssh restart is run each time after modifying sshd_config.

The Problem

  • testuser can connect when set with AllowUsers:

    AllowUsers user1 user2 testuser

  • testuser can NOT connect when setting AllowGroups for its group:

    AllowUsers user1 user2
AllowGroups ssh-users

    which results in Permission denied, please try again. when testuser enters their password in the ssh password prompt.

The Question

  • Does AllowUsers override AllowGroups?
  • What's the best way to fix this without manually adding the username to AllowUsers? Ideally I'd like to be able to just add users to the ssh-users group in the future without having to touch sshd_config again.
Improve this question
1
  • 5
    Ideally I'd like to be able to just add users to the ssh-users group in the future without having to touch sshd_config again. - So why are you using AllowUsers at all? Just put everyone in the group/groups.
    – Zoredache
    Jul 31, 2014 at 23:42

6 Answers 6

Reset to default
38

Yes, AllowUsers takes precedent over AllowGroups. If specified, only the users that match the pattern specified in AllowUsers may connect to the SSHD instance.

According to sshd_config manpage:

The allow/deny directives are processed in the following order: DenyUsers, AllowUsers, DenyGroups, and finally AllowGroups.

So, the solution to your problem is probably to use one or the other, possibly the group access directives if groups are your preferred way to manage users.

Improve this answer
6
  • So would just having AllowGroups user1 user2 ssh-users work? I'd prefer your confirmation before testing it since I've had it happen before where I accidentally removed my own ssh priviledges and had to go through support to fix it. How about the Match block? I'm asking for advice there since although I've looked at the man page, I don't have the intuition/experience to know how it would work in practice. For example with the order of processing I figured, since AllowGroups comes after AllowUsers, it would override it when processed, but my intuition was wrong there :)
    – Johannes
    Aug 1, 2014 at 0:34
  • 2
    If all 3 of those are groups on your system, it should work. If user1 and user2 are just users, you can add them to ssh-users, and get by with AllowGroups ssh-users.
    – Jeff-Inventor ChromeOS
    Aug 1, 2014 at 2:22
  • 1
    @Johannes when you test such thing, juste make sure you have a shell opened on the machine. Restarting sshd wont break your session, and if you cant open a new one, you can fix your mess with the existing one.
    – Jean-Bernard Jansen
    Jul 11, 2018 at 10:40
  • 1
    It's funny that only EL {7,8}'s man 5 sshd_config contain the complete processing order. All other distros (I use): Fedora 32, Arch and Ubuntu 20.04 LTS follow OpenSSH upstream docs in which only Deny before Allow is explained but not Users matches are processed before Groups. FYI.
    – Terry Wang
    May 7, 2020 at 0:02
  • @Jeff-InventorChromeOS In other words: If you want to allow groups, you must not also allow particular users?
    – stackprotector
    Apr 11, 2022 at 10:13
20

Here is a solution we have found working:

AllowUsers user1 user2
Match group ssh-users
    AllowUsers *
Improve this answer
1
  • 1
    ... and for multiple groups, just add more blocks with Match group XXX \ AllowUsers *
    – Gwyneth Llewelyn
    Apr 1, 2020 at 13:21
9

Jeff's answer covers the specifics of the question as detailed, but I found this question looking to use AllowUsers and AllowGroups in a slightly different scenario. I wanted to restrict incoming connections to users in a group (ssh) coming from specific subnets.

The connection rules in sshd_config are a filter - as each additional rule is applied, the set of acceptable users can only be reduced. PATTERNS in ssh_config(5) explain the form of those rules.

Additionally, according to the AllowUsers section of sshd_config:

If the pattern takes the form USER@HOST then USER and HOST are separately checked, restricting logins to particular users from particular hosts. HOST criteria may additionally contain addresses to match in CIDR address/masklen format.

AllowGroups doesn't accept the USER@HOST form.

So, to accept users 1) in the ssh group and 2) from specific subnets/hosts:

AllowUsers *@192.168.1.0/24 *@*.example.com *@1.2.3.4
AllowGroups ssh
Improve this answer
4
  • 1
    AllowGroups doesn't accept the USER@HOST form. Not sure what you mean by this, and is certainly not what the config file or docs say. Allow Groups definitely does allow you to login using ssh [email protected].
    – AndrewD
    Dec 11, 2017 at 15:59
  • 3
    @AndrewD AllowGroups only accepts group names - e.g. you cannot do AllowGroups [email protected]. HOST is the source, where you're sshing from.
    – bjacobowski
    Jan 17, 2018 at 20:45
  • @bjacobowski AndrewD seems to be right. You can use AllowGroups [email protected] to allow users of an AD group to SSH into a machine (that is domain joined).
    – stackprotector
    Apr 11, 2022 at 10:23
  • 1
    @stackprotector But it has not the same meaning as the USER@HOST form from AllowUsers. For an AD group, the @domain is part of the group name, completely ignored by sshd. It's the NSS library (winbind or other) working with AD that will do something with the domain part.
    – Ale
    Dec 7, 2022 at 13:35
2

I did a test on RedHat 8.1. It seems that it's more complicated.

AllowUsers user1 user2
AllowGroups ssh-users

If user1 and user2 is not in ssh-users group, then

  1. user1 or user2 can NOT ssh login.
  2. users in ssh-users group can NOT ssh login either!

The thing is if both AllowUsers and AllowGroups are used, then only the intersection of them is able to ssh login. It's kind of weird but actually make sense.

Improve this answer
1

In a Firewall the rules are checked in order until you find a positive match, and then the connection is allowed, in other case is denied.

In sshd_config all the rules are checked, if the origin matches two or three conditions and in one of them is NOT allowed it doesn't have access.

In this example I'm admin:

My sshd_config:

AllowUsers  admin
Match Address IP1, IP2, IP3, MyIP
 AllowUsers user1
 ChrootDirectory %h

MyIP is in the second Section, so I can't login.

I have to delete MyIp from the second section.

If I add my User in the second section I'll be restricted by ChrootDirectory

Improve this answer
1
  • Could you please wrap your sshd_config in a code block? the formatting makes that hard to read.
    – Johannes
    Oct 27, 2020 at 21:33
1

As stated by @hajimuz - if both directives are defined, i.e. AllowUsers and AllowGroups, both criteria must be met by user who tries to login.
So user name must be part of AllowUsers and his group must be part of AllowGroups. This is logical AND, not OR.

Mentioned by @Jeff-Inventor ChromeOS order of processing directives is no longer in man for sshd_config since OpenSSH 8.2:

Finally - if one would like to mix AllowUsers and AllowGroups, option suggested by @vimja works flawlessly.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .