0

I'm using a hardware HP RAID controller. My server came with one 250GB drive. I purchased three additional 250GB drives with the intent of having one as a cold-spare.

I put the two additional drives in the server and powered it up. I went into the BIOS, enabled the RAID controller, then rebooted. It brought me to the HP raid controller setup. I went in and deleted the three pre-existing arrays (which were just three drives operating independently of each other). I then selected the array configuration option, selected all three drives together, and told it to initialize. It did its thing, then I went into "create array" and again selected all three drives. It presents me with a dialog asking what kind of RAID that I want to set up, but the problem is that it doesn't present RAID 5 as an option. All I can choose is 0, 1, and 10.

I know RAID 5 is possible with 3 drives, so what gives? I've never set up a RAID array before so if there is something obvious I'm missing here don't hesitate to tell me...

Improve this question
3
  • 1
    Maybe the RAID controller doesn't support RAID 5.
    – Amok
    Sep 17, 2009 at 20:37
  • What raid controller is it? (model/part number)
    – Zoredache
    Sep 17, 2009 at 20:48
  • @Zoredache - Intel 82801
    – DWilliams
    Sep 17, 2009 at 21:08

2 Answers 2

Reset to default
1

Your RAID controller doesn't support RAID 5.

As others have said and you have witnessed by "All I can choose is 0, 1, and 10." You'll need a different controller that supports RAID 5. You'll need to get with your VAR or HP and find one compatible with your server model.

Improve this answer
2
  • Ugh what's the reasoning behind shipping a RAID controller that doesn't support what is most likely the most common RAID configuration in history? Oh well, there's nothing stopping me from using Linux software RAID I guess...
    – DWilliams
    Sep 17, 2009 at 21:05
  • I wouldn't really call the ICH a raid controller, it is just a hard drive controller with fakeraid features. I believe I saw some benchmarks somewhere that showed Linux software RAID performing better then the ICH anyway.
    – Zoredache
    Sep 17, 2009 at 21:52
0

It's possible that your RAID controller does not support RAID 5. Sometimes they will be a 'light' model that only supports 0/1/10 until it's upgraded either with a license or hardware key.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .