I have a relatively short question concerning USB device handling: How is it possible to map a USB device to a fixed device.
I know there are ways using udev rules, but I want complete instructions showing how to do it and what tools to use (if there are any). So show me how you would map the following USB drives to a fixed device.
1 USB HDD
Bus 002 Device 003: ID 1058:1110 Western Digital Technologies, Inc.
should go to:
/dev/sdc
1 USB flash drive
Bus 001 Device 005: ID 1b1c:1ab1
<- unknown vendor, actually its CORSAIR VOYAGER
should go to:
/dev/sdd