Sure, this is definately possible. You will need to configure your VPC to allow this though:
- You will need to set the VPC to use Bridged Networking. An exact how-to on this escapes me at the moment, but it's very very important.
Bridged networking will allow your virtual PC to be visible to the rest of the network.
Then, to connect to it, you will use the IP address that the Virtual PC has been assigned by your network DHCP server. If your DHCP server has permissions or restrictions, you will need to get the Virtual PC 'permitted' by it in order to receive an IP address.
E.G. Let's say you've enabled Bridged networking in your VPC, and you've confirmed that you have an IP address for the rest of the network (to confirm this, go to Start > Run > CMD and then when you have the command prompt, type IPCONFIG and look for something like the following):
C:\Users\Mark>ipconfig
Windows IP Configuration
LAN adapter Network Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::1023:f93c:4100:221f%11
IPv4 Address. . . . . . . . . . . : 192.168.163.55
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.163.1
The IPv4 address is the one you are looking for. Your connection will be that address (in this case, 192.168.163.55).