This patch seems to work for me on Ubuntu 13.10:
http://lists.debian.org/debian-kernel/2013/09/msg00184.html
Reported-by: Matt Taggart <[email protected]>
Tested-by: Matt Taggart <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/scsi/mvsas/mv_init.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 7b7381d..83fa5f8 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -729,6 +729,15 @@ static struct pci_device_id mvs_pci_table[] = {
.class_mask = 0,
.driver_data = chip_9485,
},
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL_EXT,
+ .device = 0x9485,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x9485,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_9485,
+ },
{ PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
{ PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
{ PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
At least lshw -c storage
sees the controller, and fdisk -l
sees the attached HDD now. I'm not sure how stable it runs. Will report back if I run into any problems.